Introduction
Thank you for choosing Grandeur hardware. This manual provides detailed instructions for the installation, operation, and maintenance of your Grandeur 822749 Carre Plate Passage with Newport Lever. This passage set is designed for doors where no locking mechanism is required, such as hallways, closets, or connecting rooms. Please read these instructions carefully before beginning installation to ensure proper function and longevity of your product.
Product Overview
The Grandeur 822749 Carre Plate Passage with Newport Lever features a distinctive Carre plate design, characterized by clean, parallel lines, paired with the elegant Newport lever. Crafted from solid forged brass, this hardware ensures strength, durability, and a timeless aesthetic. The vintage brass finish adds a classic touch to any interior.
Image 1: Grandeur Carre Plate Passage with Newport Lever in Vintage Brass. This image displays the complete door lever set, including the Carre plate, Newport lever, and the vintage brass finish, ready for installation on a door.
Package Contents
Please verify that all components are present before beginning installation:
- Door knob and chosen longplate for both sides of door
- Latch mechanism
- Standard spindle
- Strike plate
- Mounting screws
Setup and Installation
Before you begin, ensure you have the following tools:
- Phillips head screwdriver
- Tape measure
- Pencil
- Chisel (optional, for strike plate mortise)
Installation Steps:
- Prepare the Door: Ensure your door has standard bore holes (typically 2-1/8 inches for the main knob/lever and 1 inch for the latch). The backset (distance from the door edge to the center of the main bore hole) should be 2-3/8 inches or 2-3/4 inches.
- Install the Latch Mechanism:
- Insert the latch mechanism into the 1-inch bore hole on the edge of the door.
- Ensure the latch bolt faces the correct direction (beveled edge towards the door frame).
- Secure the latch mechanism with the provided screws. If necessary, lightly chisel the door edge to ensure the latch faceplate sits flush.
- Install the Exterior Lever and Plate:
- Insert the spindle through the latch mechanism from the exterior side of the door.
- Align the exterior Carre plate and Newport lever assembly with the spindle and the mounting holes.
- Install the Interior Lever and Plate:
- Align the interior Carre plate and Newport lever assembly with the spindle and the mounting holes.
- Ensure the pre-mounted knobs/levers are correctly oriented.
- Secure the interior and exterior assemblies together using the provided mounting screws. Tighten screws evenly until snug, but do not overtighten.
- Install the Strike Plate:
- Close the door and mark the position where the latch bolt strikes the door frame.
- Chisel a mortise in the door frame to allow the strike plate to sit flush.
- Secure the strike plate with the provided screws.
- Test Operation: Open and close the door several times, ensuring the lever operates smoothly and the latch engages properly with the strike plate.
Operating Instructions
To open a door equipped with the Grandeur Carre Plate Passage with Newport Lever, simply depress the lever handle downwards. This action retracts the latch bolt, allowing the door to open. Release the lever to allow the latch bolt to extend and secure the door when closed.
Maintenance
To maintain the finish and functionality of your Grandeur hardware:
- Cleaning: Clean regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the vintage brass finish.
- Lubrication: If the lever action becomes stiff over time, apply a small amount of silicone-based lubricant to the latch mechanism. Do not use oil-based lubricants, which can attract dust and debris.
- Tightening: Periodically check and tighten any loose mounting screws to ensure the hardware remains securely attached to the door.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lever is loose or wobbly. | Mounting screws are loose. | Tighten the mounting screws evenly. |
| Latch bolt does not retract smoothly. | Accumulated dirt or lack of lubrication in the latch mechanism. | Clean the latch mechanism and apply a silicone-based lubricant. |
| Door does not close or latch properly. | Strike plate misalignment or improper installation. | Adjust the strike plate position on the door frame. Ensure the latch bolt aligns correctly with the strike plate opening. |
Specifications
- Model Number: 822749
- Type: Passage Lever
- Material: Solid Forged Brass
- Finish: Vintage Brass
- Style: Carre Plate with Newport Lever
- Product Dimensions: 6.67 x 6.35 x 12.07 cm (2.63 x 2.5 x 4.75 inches)
- Item Weight: 1.76 kg (3.88 lbs)
- Backset: 2.75 inches (standard)
- Included Components: Door knob/lever and longplate (both sides), latch mechanism, standard spindle, strike plate, mounting screws.
- Special Features: Easy to Install
Warranty and Support
Warranty: This Grandeur product is backed by a Lifetime Mechanical Warranty, ensuring the mechanical function of the hardware for its lifetime. For specific details regarding warranty coverage, please refer to the official Grandeur website or contact customer support.
Customer Support: For technical assistance, missing parts, or warranty claims, please contact Grandeur customer service. Refer to the packaging or the official Grandeur website for contact information.
