TACTACAM Dual Battery Charger Instruction Manual

1. Product Overview

The TACTACAM Dual Battery Charger is designed to efficiently charge two Tactacam 5.0, 4.0, or Solo camera batteries simultaneously. This charger ensures your camera batteries are ready for use, minimizing downtime.

Key features include:

• Dual Charging Capability: Charges two 1350mAh batteries at the same time.
• Broad Compatibility: Designed for Tactacam 5.0, 4.0, and Solo Camera batteries (compatible with battery model: LBAT-3-4).
• Flexible Power Input: Offers two power input options, Micro USB or Mini USB, utilizing the USB cable provided with your Tactacam Package.
• Charge Indicator: Features an LED indicator that changes from red to green to show charging status.
• Compact Design: Allows for convenient storage of charged batteries.

Image: The TACTACAM Dual Battery Charger, a compact black device with two battery bays and charging indicator lights.

2. Setup Instructions

Follow these steps to set up your TACTACAM Dual Battery Charger:

1. Open the Charger: Gently open the cover of the charger to reveal the two battery bays.
2. Insert Batteries: Take your Tactacam 1350mAh batteries (model LBAT-3-4). Ensure the pull tab on the battery is facing outwards when inserting into the bay. This allows for easy removal after charging. Insert one battery into each bay. The batteries should fit firmly.
3. Close the Cover: Securely close the charger cover.
4. Connect Power: Connect the charger to a power source using either a Micro USB or Mini USB cable. The charger supports both input types. Use the USB cable supplied with your Tactacam camera or a compatible cable.

Image: The TACTACAM Dual Battery Charger with its top cover open, showing the two internal battery slots.

3. Operating Instructions

Once batteries are inserted and the charger is connected to a power source, the charging process begins automatically.

• Charging Indication: The LED indicator light for each battery bay will illuminate red during charging.
• Full Charge Indication: When a battery is fully charged, its corresponding LED indicator light will turn green.
• Battery Storage: Once fully charged, batteries can be removed for use or left in the charger for convenient storage until needed.

4. Maintenance

To ensure the longevity and optimal performance of your TACTACAM Dual Battery Charger, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Avoid using harsh chemicals or abrasive materials.
• Port Care: Keep the USB input ports free from dust and debris.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping the charger or subjecting it to strong impacts.

5. Troubleshooting

If you encounter issues with your TACTACAM Dual Battery Charger, refer to the following common troubleshooting steps:

• Charger Not Powering On:
  • Ensure the USB cable is securely connected to both the charger and the power source.
  • Try a different USB cable or power adapter.
  • Verify the power source is active (e.g., wall outlet, computer USB port).
• Batteries Not Charging (LED remains off or red indefinitely):
  • Confirm batteries are inserted correctly with the pull tab facing out.
  • Remove and re-insert the batteries to ensure proper contact.
  • Check if the batteries themselves are damaged or at the end of their lifespan.
  • Ensure the charger is receiving adequate power.
• Slow Charging:
  • Ensure you are using a power adapter that provides sufficient current (e.g., 5V 1A per port).
  • Avoid charging in extremely cold or hot environments, as this can affect charging efficiency.

If problems persist after attempting these steps, please contact TACTACAM customer support.

6. Specifications

7. Warranty and Support

For detailed warranty information and customer support, please refer to the official TACTACAM website or the documentation included with your product packaging. You may also contact the retailer where the product was purchased.