Smartby X32
Smartby Remote Control Instruction Manual
For Sceptre X32 TV/DVD Combo Models
Introduction
This manual provides instructions for the Smartby replacement remote control, designed for use with various Sceptre X32 TV/DVD Combo models. This remote offers direct compatibility without requiring programming. Please refer to this guide for setup, operation, and maintenance.
Image 1: Front view of the Smartby Remote Control.
Compatible Models
This remote control is compatible with the following Sceptre X32 TV/DVD Combo models:
- E165BDHD
- E195BDSHD
- E195BVSHD
- E240
- E240BCFHD
- E243
- E243BDFHD
- E243PVFHD
- E245BDFHD
- E245BDFHDU
- E245BVFHD
- E246BDFHD
- E32
- E325BDHD
- E325BDHDW
- E325BDHDW8VN01
- E325BVFMDU
- E325BVHDC
- E325BVHDH
- E325E328BV
- E326
- E328BVFMDC
- X325BV
- X325BVFHD
- X325BVFHDU
- X328BVFHD
- X425BVFHD3
Setup
1. Battery Installation
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Replace the battery compartment cover, ensuring it clicks securely into place.
Note: This remote control does not require any programming. It is ready for use immediately after battery installation.
Image 2: Angled view of the remote control, illustrating the general location of the battery compartment on the back.
Operating Instructions
The Smartby remote control provides full functionality for your Sceptre X32 TV/DVD Combo. Below is a guide to the primary buttons and their functions.
Image 3: Detailed button layout of the Smartby Remote Control.
Button Functions:
| Button | Function |
|---|---|
| Power | Turns the TV/DVD Combo on or off. |
| Source | Selects the input source (e.g., TV, HDMI, DVD, USB). |
| Mute | Mutes or unmutes the audio. |
| CC | Activates or deactivates Closed Captions. |
| MTS | Selects Multi-channel Television Sound options (e.g., Stereo, SAP). |
| Number Buttons (0-9, 10+) | Direct channel selection or numerical input. |
| R | Recall button, typically for returning to the previous channel. |
| Guide | Displays the electronic program guide (if available). |
| Info | Displays current program information. |
| Menu | Accesses the main menu for TV settings. |
| Navigation Arrows (Up, Down, Left, Right) | Navigates through menus and options. |
| ENTER | Confirms selections in menus. |
| Exit | Exits current menu or function. |
| VOL (+/-) | Adjusts the volume level. |
| CH (+/-) | Changes the channel. |
| Aspect | Changes the screen aspect ratio. |
| Freeze | Pauses the current image on screen. |
| Sleep | Sets a timer for the TV to turn off automatically. |
| Picture | Accesses picture settings (e.g., brightness, contrast). |
| Sound | Accesses sound settings (e.g., bass, treble, audio mode). |
| Favorite | Accesses favorite channels list. |
| Add/Del | Adds or deletes channels from the favorite list. |
| D.Menu | Accesses the DVD menu. |
| DVD | Switches to DVD player mode. |
| USB | Switches to USB input mode. |
| Playback Controls (Play/Pause, Stop, Rewind, Fast Forward, Previous/Next Track) | Controls DVD or USB media playback. |
| Repeat | Repeats current track or disc. |
| A-B | Repeats a specific section between points A and B. |
| D.Setup | Accesses DVD player setup menu. |
| Title | Accesses the DVD title menu. |
| Subtitle | Selects subtitle language for DVD playback. |
| Audio | Selects audio track for DVD playback. |
Maintenance
Battery Replacement:
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries simultaneously with new AAA batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning:
To clean the remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote.
Storage:
Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures. If the remote will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead or incorrectly inserted batteries. | Replace batteries with new ones, ensuring correct polarity (+/-). |
| Remote signal blocked. | Obstruction between remote and TV/DVD Combo. | Ensure a clear line of sight between the remote's IR emitter and the TV/DVD Combo's IR receiver. |
| Buttons are sticking or unresponsive. | Dirt or debris under the buttons. | Clean the remote control as described in the Maintenance section. |
| Remote works intermittently. | Low battery power. | Replace batteries. |
Specifications
- Brand: Smartby
- Model Number: X32
- Compatible Devices: Sceptre TV/DVD Combo (various models listed above)
- Connectivity Technology: Infrared
- Power Source: 2 x AAA Batteries (not included)
- Package Dimensions: 8.1 x 2.6 x 0.9 inches
- Item Weight: 3.19 ounces
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 1
Warranty and Support
This Smartby remote control comes with a 30-day return policy. For any issues or support inquiries, please refer to your purchase documentation or contact the seller directly.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.