Introduction
This instruction manual provides essential information for the assembly, operation, and care of your Transformers: The Last Knight Premier Edition Megatron action figure. This highly detailed figure converts between robot and jet modes, offering versatile display and play options. Please read these instructions carefully to ensure proper use and to maximize your enjoyment of the product.
Safety Information
This product is recommended for ages 8 years and up. Keep small parts away from younger children to prevent choking hazards. Adult supervision is recommended during initial transformation to ensure correct handling and prevent damage. Avoid excessive force when converting the figure, as some parts are designed to detach to prevent breakage and can be reattached.
What's in the Box
- 1 Transformers: The Last Knight Premier Edition Megatron Transforming Figure
- Weapon Accessories (Sword, Fusion Cannon)
Image: Megatron figure in robot mode, holding a sword and a shield-like fusion cannon. This is the primary form of the figure.
Setup and Assembly
Your Megatron figure comes pre-assembled in robot mode. No initial assembly is required. The figure is ready for display or transformation directly out of the packaging.
Image: The Megatron figure displayed within its retail packaging, showcasing its robot mode.
Operating Instructions
Transformation: Robot to Jet Mode
The Megatron figure converts from robot mode to jet mode in 30 steps. Refer to the visual guide on the product packaging or the official product video for detailed instructions. Apply gentle, firm pressure during transformation. Some parts are designed to detach if excessive force is applied, which can then be reattached.
Image: Megatron figure transformed into its powerful jet mode, featuring attached flame effects at the rear.
Weapon Accessories
- Sword: The figure includes a detailed sword accessory that can be held in either hand in robot mode.
- Fusion Cannon: The fusion cannon can transform from a shield configuration to a cannon. It attaches to the figure's arm.
Poseability and Features
The Megatron figure features multiple articulation points allowing for various battle-ready poses. The head includes a mask feature that can be adjusted. Ensure all joints are securely connected after posing or transformation.
Video: Official product demonstration of the Transformers: The Last Knight Premier Edition Leader Class Megatron Action Figure, showcasing its robot and jet modes, and transformation sequence.
Maintenance
- Cleaning: Wipe the figure with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, which may damage the paint or plastic.
- Storage: Store the figure in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Joint Care: Periodically check joints for tightness. If a joint becomes too loose, it may be possible to tighten it gently with a small amount of clear nail polish or a similar non-damaging adhesive applied to the joint and allowed to dry.
Troubleshooting
| Issue | Possible Cause / Solution |
|---|---|
| Figure parts detach during transformation. | This is often a design feature to prevent breakage from excessive force. Gently reattach the detached part by aligning it with its connection point and pressing firmly until it clicks into place. |
| Head mask does not close completely. | Ensure all surrounding parts are correctly aligned and not obstructing the mask mechanism. Apply gentle pressure to close. If the mechanism is faulty, contact customer support. |
| Loose joints (e.g., hips). | Some figures may have slightly looser joints. This can sometimes be remedied by applying a thin layer of clear nail polish to the ball joint or peg, allowing it to dry completely, and then reassembling. This adds friction. |
| Fusion cannon spring mechanism fails. | If the internal spring mechanism of the fusion cannon fails, it may not be user-repairable due to small components. Contact customer support for assistance. |
Specifications
- Product Dimensions: 4.02 x 9.49 x 10.98 inches
- Item Weight: 1 pound
- Model Number: C1341
- Manufacturer Recommended Age: 8 years and up
- Release Date: April 24, 2017
- Manufacturer: Hasbro
Image: The Megatron figure's approximate height is 8.7 inches (22 cm), as shown in robot mode.
Warranty and Support
This product is covered by the manufacturer's standard warranty. For warranty claims, replacement parts, or further technical assistance, please contact Hasbro customer service. Refer to the product packaging or the official Hasbro website for contact details.
