EGO POWER+ Anti-Scratch Safety Glasses GS002 User Manual

1. Introduction

The EGO POWER+ Anti-Scratch Safety Glasses (Model GS002) are designed to provide superior eye protection in various work environments. These glasses feature high-quality polycarbonate lenses that are hard-coated to resist scratching and impact, ensuring durability and clear vision. With 99.9% UV protection and a sport-inspired design, they offer a comfortable and secure fit for both men and women. The grey tinted lenses are specifically designed for improved vision in bright, sunny conditions. These safety glasses conform to ANSI Z87.1 and CE EN166 standards, guaranteeing reliable protection.

Figure 1: EGO POWER+ Anti-Scratch Safety Glasses (Grey Lens)

2. Safety Information

Always prioritize eye safety. Read and understand all instructions before using these safety glasses. Failure to do so may result in serious eye injury.

• Always wear eye protection: Ensure the safety glasses are worn at all times when in an environment where eye hazards exist.
• Inspect before use: Before each use, inspect the lenses and frame for any signs of damage, cracks, or scratches. Damaged glasses may compromise protection.
• Replace if damaged: If the safety glasses are scratched, cracked, or otherwise damaged, replace them immediately. Do not attempt to repair them.
• Proper fit: Ensure the glasses fit snugly and comfortably, providing full coverage around the eyes. Adjust as necessary.
• Cleaning: Clean lenses regularly to maintain clear vision. Refer to the "Maintenance and Care" section for detailed instructions.
• Storage: Store glasses in a clean, dry place away from direct sunlight and extreme temperatures to prevent damage.

3. Product Features

The EGO POWER+ Safety Glasses are engineered with features to enhance protection and comfort:

• High-Quality Polycarbonate Lenses: Hard-coated to resist scratching and impact, ensuring long-lasting clarity and protection.
• 99.9% UV Protection: Shields eyes from harmful ultraviolet rays, suitable for outdoor use.
• Grey Tinted Lenses: Optimized for bright, sunny conditions to reduce glare and improve visual comfort.
• Sport-Inspired Design: Offers a sleek and modern appearance without compromising safety.
• Soft Rubber Temple Tips and Nosepiece: Designed for a secure and comfortable fit, minimizing pressure points during extended wear.
• ANSI Z87.1 and CE EN166 Standard Compliant: Meets rigorous safety standards for eye and face protection.

4. Setup and Wearing Instructions

To ensure maximum protection and comfort, follow these steps for wearing your EGO POWER+ Safety Glasses:

1. Clean the Glasses: Before first use, and periodically thereafter, clean the lenses and frame as described in the "Maintenance and Care" section.
2. Position on Face: Place the safety glasses on your face, ensuring the nosepiece rests comfortably on your nose bridge.
3. Adjust Temples: Gently slide the temple arms over your ears. The soft rubber tips should sit securely without causing discomfort.
4. Check Coverage: Verify that the lenses fully cover your eyes and the surrounding area, providing adequate side protection. There should be no significant gaps that could allow debris to enter.
5. Ensure Stability: The glasses should feel stable on your face and not slip during movement. The sport-inspired design and rubber touch points are intended to enhance this stability.

5. Maintenance and Care

Proper maintenance extends the life and effectiveness of your safety glasses.

• Cleaning Lenses: Use a mild soap and lukewarm water solution to clean the lenses. Gently wipe with a soft, lint-free cloth. Avoid abrasive cleaners, solvents, or paper towels, as these can scratch the lenses.
• Cleaning Frame: Wipe the frame with a damp cloth to remove dirt and sweat.
• Drying: Allow the glasses to air dry or gently pat them dry with a clean, soft cloth.
• Storage: Store your safety glasses in a protective case or pouch when not in use to prevent scratches and damage. Keep them away from extreme heat, cold, and direct sunlight.
• Avoid Chemicals: Do not expose the glasses to harsh chemicals, as this can degrade the lens material and coatings.

6. Troubleshooting

While EGO POWER+ Safety Glasses are designed for optimal performance, here are solutions to common concerns:

Issue: Lenses appear scratched or hazy.

Solution: Inspect the lenses. If they are significantly scratched or hazy, the protective coating may be compromised. Replace the glasses immediately to ensure proper eye protection.

Issue: Glasses feel uncomfortable or slip.

Solution: Ensure the glasses are positioned correctly on your nose and ears. The soft rubber temple tips and nosepiece are designed for comfort and grip. If discomfort persists, check for any obstructions or improper fit. These glasses are designed for a universal fit, but individual facial structures may vary.

Issue: Vision is not clear.

Solution: Clean the lenses thoroughly using the instructions in the "Maintenance and Care" section. Ensure no smudges, dirt, or debris are present. If clarity issues persist after cleaning, the lenses may be damaged and require replacement.

7. Specifications

8. Warranty and Support

EGO Power+ products are manufactured to high-quality standards. For specific warranty information and customer support, please refer to the documentation included with your purchase or visit the official EGO Power+ website. Ensure you retain your proof of purchase for any warranty claims.

These safety glasses meet the requirements of ANSI Z87.1 and CE EN166 standards for eye protection.