Monoprice Monolith M1060 Planar Magnetic Headphones User Manual

1. Introduction

The Monolith M1060 planar magnetic headphones are engineered to deliver a detailed and expansive audio experience. Utilizing 106mm planar drivers, these headphones provide precise imaging, low distortion, and a balanced sound profile suitable for audiophile listening and professional applications.

Monoprice Monolith M1060 Planar Magnetic Headphones, showcasing their open-back design and comfortable ear pads.

2. Key Features

• 106mm Planar Magnetic Drivers: These drivers feature a flat membrane surrounded by magnets, producing sound with lower distortion, enhanced bass response, and precise audio imaging compared to traditional dynamic drivers.
• Open-Back Design: Provides a holographic listening experience, creating a wider soundstage that simulates a live performance environment.
• Comfort-Engineered Earpads: Large, faux leather earpads and a padded headband ensure comfort during extended listening sessions.
• High Power Handling: Capable of handling up to 10 watts of maximum power.
• 50 Ohm Impedance: Designed for compatibility with a wide range of audio equipment.

3. Setup

3.1 Unpacking

Carefully remove all components from the packaging. The box should contain:

• Monoprice Monolith M1060 Headphones
• Detachable audio cable(s)

3.2 Connecting Your Headphones

The Monolith M1060 headphones utilize a detachable cable design for versatility and ease of storage. To connect:

1. Identify the left (L) and right (R) connectors on the headphone earcups.
2. Align the corresponding connectors on the audio cable with the ports on each earcup.
3. Gently push the connectors firmly into place until they click or feel secure.
4. Plug the 3.5mm jack end of the cable into your audio source (e.g., amplifier, DAC, smartphone, computer).

The Monolith M1060 headphones connected to an external amplifier for optimal audio performance.

4. Operating Instructions

4.1 Wearing the Headphones

Adjust the headband to ensure a comfortable and secure fit. The earcups should fully enclose your ears without excessive pressure. The padded headband is designed to distribute weight evenly for comfort during long listening sessions.

4.2 Adjusting Volume

Control the audio volume directly from your connected audio source. Start with a low volume and gradually increase it to a comfortable listening level. Avoid excessively high volumes to prevent hearing damage.

4.3 Listening Experience

Due to their open-back design, these headphones provide a spacious and natural soundstage. This design allows some ambient sound to enter, enhancing the sense of realism and depth in your audio. For optimal experience, use in a quiet environment.

5. Maintenance

5.1 Cleaning

• Use a soft, dry cloth to wipe the exterior surfaces of the headphones.
• For earpads, gently wipe with a slightly damp cloth and allow to air dry completely before use. Avoid harsh chemicals or abrasive cleaners.

5.2 Storage

When not in use, store the headphones in a clean, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on top of the headphones to prevent damage.

6. Troubleshooting

6.1 No Sound

• Ensure the audio cable is securely connected to both the headphones and the audio source.
• Check the volume level on your audio source and ensure it is not muted.
• Test the headphones with a different audio source or device to rule out source-specific issues.

6.2 Distorted Audio

• Lower the volume on your audio source. Distortion can occur at excessively high volume levels.
• Ensure the audio cable is not damaged or kinked.
• Verify that your audio source is providing a clean signal.

6.3 Uncomfortable Fit

• Adjust the headband sliders on both sides to achieve a balanced and comfortable fit on your head.
• Ensure the earcups are properly positioned over your ears.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

Monoprice products typically come with a manufacturer's warranty. While specific terms may vary, some Monolith products have been noted to include a 5-year warranty. Please refer to your product's specific warranty card or the official Monoprice website for the most accurate and up-to-date warranty details.

8.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Monoprice customer support through their official website or the contact information provided in your product packaging. Ensure you have your product model number (M1060) and proof of purchase available when contacting support.