1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MENGQI-CONTROL 4 Door Access Control System. Please read this manual thoroughly before installation and use to ensure proper functionality and safety. This system is designed to manage access for up to four doors using magnetic locks, RFID cards, and key fobs, with remote control capabilities via a smartphone application.
2. Package Contents
Verify that all components listed below are present in your package:
- 1x Power Supply Box (110-240V input, 5A output)
- 1x 4-Door Network Access Control Panel Controller
- 4x Electric Magnetic Locks (280kg/600lbs holding force)
- 4x RFID Readers (Waterproof)
- 4x Push to Exit Buttons
- 1x USB Enroll Reader
- 50x RFID Cards
- 50x RFID Key Fobs
- 1x User Manual (this document)

Figure 2.1: Overview of all components included in the MENGQI-CONTROL 4 Door Access Control System kit.
3. Safety Information
Observe the following safety precautions during installation and operation:
- Ensure power is disconnected before performing any wiring or maintenance.
- All electrical wiring should be performed by a qualified professional.
- Do not expose components to extreme temperatures, moisture, or corrosive environments.
- Verify correct voltage (110V) for the power supply box.
- Secure all wiring to prevent accidental disconnections or short circuits.
4. Setup
4.1. Component Overview
Familiarize yourself with the main components:

Figure 4.1.1: The 110V Power Supply Box, which powers the entire access control system.

Figure 4.1.2: The 4-Door Network Access Control Panel Controller, the central unit for managing door access.

Figure 4.1.3: A 600lbs Electric Magnetic Lock with its associated mounting hardware.

Figure 4.1.4: An RFID Reader, showing its dimensions (101mm x 43mm).

Figure 4.1.5: A Push to Exit Button for egress from controlled areas.

Figure 4.1.6: The USB Enroll Reader, used for registering RFID cards and key fobs with the system software.

Figure 4.1.7: A stack of RFID Cards for user access.

Figure 4.1.8: RFID Key Fobs, an alternative form factor for user access credentials.
4.2. Installation Guidelines
Refer to the detailed video guide and wiring diagrams provided with your purchase for specific installation steps. General guidelines include:
- Mounting: Securely mount the power supply box and control panel in a protected, accessible location.
- Magnetic Locks: Install magnetic locks on the door frames and corresponding armature plates on the doors. Ensure proper alignment for maximum holding force.
- RFID Readers: Mount RFID readers on the exterior side of each controlled door.
- Exit Buttons: Install push-to-exit buttons on the interior side of each controlled door.
4.3. Wiring
The system uses TCP/IP for communication. Follow the provided wiring diagram meticulously. Key connections include:
- Connect the power supply to the control panel.
- Connect each magnetic lock to the control panel's lock output terminals.
- Connect each RFID reader to the control panel's reader input terminals.
- Connect each exit button to the control panel's exit button input terminals.
- Connect the control panel to your network via an Ethernet cable for software communication and remote access.
4.4. Software Installation
The management software supports Windows 7/8/10/11 (both 32 & 64 bit). Install the software from the provided media or download link. The software allows for system configuration, user management, and event logging.
5. Operating Instructions
5.1. User Enrollment
To enroll RFID cards and key fobs:
- Connect the USB Enroll Reader to your computer.
- Open the access control management software.
- Navigate to the user management section.
- Present an RFID card or key fob to the USB Enroll Reader. The software will read its unique ID.
- Assign the card/fob to a user and configure their access permissions (e.g., specific doors, time schedules).
- Save the changes to synchronize with the control panel.
5.2. Accessing Doors
- Entry: Present an enrolled RFID card or key fob to the RFID reader on the exterior of the door. If authorized, the magnetic lock will disengage, allowing entry.
- Exit: Press the push-to-exit button on the interior of the door. The magnetic lock will disengage, allowing exit.
5.3. Remote Access (Smartphone App)
The system supports a smartphone application (iOS & Android) for remote door opening:
- Download and install the MENGQI-CONTROL access control app from your device's app store.
- Follow the in-app instructions to connect the app to your access control system via your network.
- Once connected, you can remotely open configured doors from your smartphone.
5.4. System Configuration
The management software allows for advanced configuration:
- Time Schedules: Set specific times and days for doors to automatically open/close or for user access permissions to be active.
- Access Groups: Create groups of users with predefined access levels.
- Event Logs: View and export detailed records of all access events (entry, exit, denied access).
- Anti-Passback: Configure anti-passback rules to prevent unauthorized re-entry.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your access control system:
- Cleaning: Periodically clean RFID readers and magnetic locks with a soft, dry cloth. Avoid abrasive cleaners.
- Wiring Inspection: Annually inspect all wiring for signs of wear, damage, or loose connections.
- Software Updates: Keep the management software updated to the latest version for security patches and new features.
- Backup: Regularly back up your system's user database and configuration settings.
- Magnetic Lock Alignment: Ensure magnetic locks and armature plates remain properly aligned for secure locking.
7. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Door does not unlock with RFID card/fob. | Card/fob not enrolled, incorrect permissions, reader malfunction, power issue. | Verify card/fob enrollment and permissions in software. Check reader connection and power to the system. |
| Magnetic lock not engaging. | Power failure to lock, faulty lock, misalignment, control panel issue. | Check power supply to the lock. Ensure lock and armature plate are aligned. Inspect wiring to the control panel. |
| Software cannot connect to control panel. | Network issue, incorrect IP address, firewall blocking. | Verify network cable connection. Check control panel's IP address. Disable firewall temporarily for testing. |
| Push to exit button not working. | Button wiring issue, faulty button. | Inspect wiring from the button to the control panel. Test the button for continuity. |
If you encounter issues not covered here, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | MENGQI-CONTROL |
| Model Number | 4door-ControlPanel-MagLock |
| Style | 4Door Magnetic Lock |
| Power Source | Corded Electric |
| Voltage | 110 Volts |
| Connectivity Technology | USB, TCP/IP (Network) |
| Control Method | App, RFID Card/Fob |
| User Capacity | Up to 20,000 users |
| Event Log Capacity | Up to 100,000 logs |
| RFID Reader Range | 5-10cm |
| Magnetic Lock Holding Force | 600lbs (280kg) |
| Software Compatibility | Windows 7/8/10/11 (32 & 64 bit) |
| Database Support | Access & SQL Server |
| Material | Metal (Power Supply Box, Magnetic Locks) |
| Item Weight | 25.6 pounds |
| Package Dimensions | 12.8 x 11.5 x 9.1 inches |
9. Warranty Information
MENGQI-CONTROL products are designed for reliability. Specific warranty details are typically provided with your purchase documentation. Please retain your proof of purchase for warranty claims. For extended protection, consider available protection plans.
- 3-Year Protection Plan: Available for purchase.
- Complete Protect: Monthly plan covering eligible past and future purchases.
For detailed terms and conditions, refer to the warranty card included in your package or contact MENGQI-CONTROL customer service.
10. Support
For technical assistance, installation guidance, or troubleshooting not covered in this manual, please contact MENGQI-CONTROL customer support. Our team is available to provide detailed video guides and wiring diagrams to assist with your setup.
Contact Information: Refer to the contact details provided with your product packaging or visit the official MENGQI-CONTROL website.
Online Resources:
- Product support page: MENGQI-CONTROL Store on Amazon
- Additional video guides and wire diagrams are available to facilitate system setup.