Inventum BDA432 Blood Pressure Monitor

Introduction

Thank you for choosing the Inventum BDA432 Blood Pressure Monitor. This compact, fully automatic device is designed for easy and accurate monitoring of your blood pressure and heart rate at home. It features a large screen for clear readings, classifies measurements according to WHO guidelines using a color scale, and includes an arrhythmia indicator. This manual provides essential information for the safe and effective use of your blood pressure monitor.

Important Safety Information

• Consult your physician before using this device for any medical condition. This device is not intended to replace professional medical advice or diagnosis.
• Do not use this device for the diagnosis or treatment of any health problem or disease.
• Keep the device out of reach of children and pets.
• Do not use the device in a moving vehicle.
• Avoid taking measurements immediately after exercise, bathing, or consuming alcohol or caffeine.
• Ensure the cuff size is appropriate for your wrist circumference (22-32 cm).
• Only use accessories specified by the manufacturer.

Package Contents

Please check the box for the following items:

• Inventum BDA432 Blood Pressure Monitor
• Blood Pressure Cuff (22-32 cm)
• 4 x AAA Batteries
• Storage Box

Image: The Inventum BDA432 Blood Pressure Monitor, its accompanying cuff, and a storage box, as included in the package.

Setup

Battery Installation

1. Locate the battery compartment on the back of the monitor.
2. Open the battery cover.
3. Insert 4 x AAA batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Close the battery cover securely.

Cuff Attachment

The blood pressure cuff is designed for wrist circumferences between 22 and 32 cm. Ensure the cuff is properly connected to the monitor before use.

Image: The blood pressure cuff, designed for wrist circumferences of 22-32 cm.

Operating Instructions

Taking a Measurement

1. Sit comfortably with your back supported and feet flat on the floor. Relax for 5 minutes before taking a measurement.
2. Place the cuff on your bare wrist, approximately 1-2 cm above your elbow joint, ensuring the air tube runs down the center of your arm. The cuff should be snug but not too tight.
3. Rest your arm on a table so the cuff is at heart level.
4. Press the START/STOP button. The monitor will automatically inflate the cuff and begin the measurement.
5. Remain still and silent during the measurement.
6. Once the measurement is complete, the monitor will display your Systolic (SYS), Diastolic (DIA), and Pulse (Pul/min) readings.

Image: The Inventum BDA432 Blood Pressure Monitor displaying typical blood pressure and pulse readings on its large LCD screen.

Understanding Readings

The monitor classifies your blood pressure readings according to the World Health Organization (WHO) guidelines using a color scale on the left side of the display. Refer to the color indicators for a quick assessment of your blood pressure category.

An arrhythmia indicator will appear on the display if an irregular heartbeat is detected during the measurement. If this indicator appears frequently, consult your physician.

Memory Function

The Inventum BDA432 stores up to 60 measurements in its memory. To access past readings, press the M button. Use the S button to scroll through the stored data. Each record includes the blood pressure, pulse, and the time and date of the measurement.

Maintenance and Care

• Clean the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Store the device in the provided storage box when not in use to protect it from dust and damage.
• Avoid exposing the monitor to extreme temperatures, direct sunlight, or high humidity.
• Remove batteries if the device will not be used for an extended period to prevent leakage.

Image: The blue fabric storage bag provided for protecting the blood pressure monitor when not in use.

Troubleshooting

Specifications

Warranty and Support

For information regarding warranty coverage or technical support for your Inventum BDA432 Blood Pressure Monitor, please refer to the warranty card included with your purchase or contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.