Introduction
Thank you for choosing the Sluban M38-B7800 Space Fighter Robot building set. This manual provides essential information for the assembly, operation, and maintenance of your new building toy. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable experience. This set contains 157 pieces designed for creative construction.
Safety Information
- Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age.
- Age Recommendation: Recommended for ages 60 months (5 years) and up. Adult supervision is advised for younger children.
- Keep all packaging materials away from children to prevent suffocation.
- Do not put building blocks in mouth.
Package Contents
Before starting assembly, please verify that all components are present in the package:
- 157 x Sluban Building Blocks (various shapes and sizes)
- 1 x Instruction Manual (this document, or a printed version included in the box)
If any parts are missing or damaged, please refer to the Troubleshooting section for assistance.
Setup and Assembly
The Sluban M38-B7800 Space Fighter Robot is designed for intuitive assembly. Follow the detailed step-by-step instructions provided in the separate printed assembly manual included in your product box. The general steps are outlined below:
- Preparation: Unpack all building blocks and lay them out on a clean, flat surface. Sort pieces by color or type if desired to simplify the process.
- Follow Instructions: Refer to the included pictorial instruction booklet. Each step will show which pieces to connect and where.
- Connect Pieces: Firmly press the building blocks together until they are securely connected. Ensure proper alignment for a stable structure.
- Verify Assembly: After completing all steps, check the assembled model against the images to ensure all parts are correctly placed and secure.

Figure 1: Fully assembled Sluban M38-B7800 Space Fighter Robot. This image shows the robot in its primary configuration, highlighting its yellow and grey color scheme and overall design.

Figure 2: The Space Fighter Robot in a standing position, showcasing its articulated limbs and detailed construction. Note the antenna and weapon attachments.

Figure 3: The Space Fighter Robot transformed into a wheeled vehicle, demonstrating its versatile design. This view highlights the treads and wheels.
Operating the Robot
Once assembled, the Sluban M38-B7800 Space Fighter Robot is ready for imaginative play. This is a static model with articulated joints for posing, not a remote-controlled or electronic toy.
- Posing: Gently adjust the robot's limbs and joints to create various action poses. Avoid excessive force to prevent parts from detaching or breaking.
- Imaginative Play: Use the robot in creative scenarios, combining it with other building sets or toys for expanded play possibilities.
- Transformation: The model may offer alternative configurations (e.g., robot mode, vehicle mode) as depicted in the assembly manual or product images. Follow the instructions to reconfigure the model.
Maintenance
Proper care will ensure the longevity of your Sluban building set.
- Cleaning: To clean the blocks, wipe them with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Avoid submerging the blocks in water for extended periods.
- Storage: Store the assembled robot or disassembled blocks in a cool, dry place away from direct sunlight and extreme temperatures. This helps prevent material degradation and color fading.
- Disassembly: If disassembling the model, do so carefully to avoid stressing or breaking the connection points.
Troubleshooting
If you encounter any issues during assembly or play, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Missing pieces | Pieces may be overlooked in packaging or accidentally discarded. | Carefully check all packaging materials. If still missing, contact Sluban customer support. |
| Difficulty connecting blocks | Incorrect orientation or insufficient force. | Ensure blocks are aligned correctly. Apply firm, even pressure. Refer to the instruction manual for specific connections. |
| Assembled model is unstable | Blocks not fully connected or incorrect assembly step. | Review previous assembly steps. Press all blocks firmly together to ensure secure connections. |
Specifications
| Brand | Sluban |
| Model Number | M38-B7800 |
| Number of Pieces | 157 |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Item Dimensions (L x W x H) | 19 x 26 x 4.5 Centimeters |
| Item Weight | 260 Grams |
| Minimum Recommended Age | 60 Months (5 Years) |
| UPC | 675595128943 |
Warranty and Support
Sluban products are manufactured to high-quality standards. For any inquiries regarding missing parts, product defects, or general support, please contact Sluban customer service. Refer to the packaging or the official Sluban website for specific contact information.
Please retain your purchase receipt as proof of purchase for any warranty claims.