BLANCO 522983

BLANCO ANDANO 340/340-U Double Basin Stainless Steel Undermount Sink

Model: 522983 | Brand: BLANCO

1. Introduction

Thank you for choosing the BLANCO ANDANO 340/340-U double basin stainless steel sink. This manual provides essential information for the safe installation, operation, and maintenance of your new sink. Please read these instructions carefully before beginning installation or use, and keep them for future reference.

The BLANCO ANDANO series is renowned for its modern design and convincing functionality. With narrow corner and base radii, this sink offers maximum usable floor space and a large basin volume, making it a premium addition to any kitchen.

BLANCO ANDANO 340/340-U Double Basin Stainless Steel Undermount Sink

Image 1: BLANCO ANDANO 340/340-U Double Basin Stainless Steel Undermount Sink, showcasing its sleek design and dual basins.

2. Safety Information

  • Always wear appropriate personal protective equipment (PPE) such as gloves and safety glasses during installation.
  • Ensure all water and electrical connections are handled by qualified professionals if required.
  • Handle the sink with care to avoid injury, as edges can be sharp.
  • Verify that the countertop material and cabinet structure can support the weight of the sink and its contents when full.
  • Do not use abrasive cleaners or tools that could damage the stainless steel finish.

3. Package Contents

Please check that all components are present before beginning installation:

  • Stainless steel basin (double)
  • InFino 3 1/2" basket strainers (x2)
  • Waste and overflow fitting with space-saving pipe
  • Fastening set (for installation)

Note: Remote waste control is not included with this model.

4. Setup and Installation

The BLANCO ANDANO 340/340-U is designed for undermount installation, providing a seamless look with your countertop. Professional installation is recommended.

4.1 Pre-Installation Checks

  • Ensure your base cabinet has a minimum width of 80 cm to accommodate the sink.
  • Verify that the countertop cut-out matches the sink dimensions. Detailed cut-out templates and instructions are available on the official BLANCO website.
  • Confirm all necessary plumbing connections are accessible and correctly positioned.

4.2 Installation Steps (Overview)

  1. Prepare the countertop cut-out according to the BLANCO template.
  2. Apply a suitable sealant around the rim of the sink opening on the underside of the countertop.
  3. Position the sink underneath the countertop opening and secure it using the provided fastening set. Ensure a tight and waterproof seal.
  4. Install the InFino basket strainers and the waste and overflow fitting according to the included diagrams.
  5. Connect the plumbing to the waste fitting, ensuring all connections are secure and leak-free.
  6. Perform a water test to check for any leaks.
Technical drawing with dimensions for BLANCO ANDANO 340/340-U sink

Image 2: Technical drawing illustrating the external dimensions (745 x 440 mm) and basin dimensions (340 x 340 mm) of the BLANCO ANDANO 340/340-U sink, crucial for accurate countertop cut-out.

5. Operating Instructions

Your BLANCO ANDANO sink is designed for everyday kitchen tasks. The double basin configuration allows for versatile use, such as washing dishes in one basin while rinsing in the other, or preparing food.

5.1 InFino Drainage System

The integrated InFino drainage system is elegantly designed and particularly easy to clean. To operate the basket strainer:

  • Open: Press the basket strainer down gently to allow water to drain freely.
  • Close: Lift the basket strainer slightly and turn it to seal the drain, allowing the basin to fill with water.
  • Remove for Cleaning: Pull the basket strainer straight up to remove it for easy cleaning of food debris.
Close-up of BLANCO InFino drainage system

Image 3: Close-up view of the BLANCO InFino drainage system, highlighting its integrated design and ease of use for efficient water management.

6. Maintenance and Care

Proper care will ensure the longevity and pristine appearance of your BLANCO stainless steel sink.

6.1 Daily Cleaning

  • After each use, rinse the sink thoroughly with clean water to remove food particles and soap residue.
  • Wipe the sink dry with a soft cloth to prevent water spots, especially in hard water areas.
  • For general cleaning, use a mild dish soap and a soft sponge or cloth.

6.2 Deep Cleaning and Stain Removal

  • For stubborn stains, use a specialized stainless steel cleaner. Always follow the product instructions and rinse thoroughly.
  • Avoid using abrasive cleaners, steel wool, or scouring pads, as these can scratch the satin finish.
  • Do not leave acidic foods (e.g., lemon juice, vinegar) or harsh chemicals on the sink surface for extended periods.

6.3 InFino Strainer Care

Regularly remove and clean the InFino basket strainers to prevent blockages and maintain hygiene. Wash with warm soapy water and a brush if necessary.

7. Troubleshooting

Here are some common issues and their potential solutions:

ProblemPossible CauseSolution
Slow drainageFood debris or grease buildup in the InFino strainer or waste pipe.Remove and clean the InFino basket strainer. Use a drain cleaner suitable for stainless steel if the blockage is further down the pipe.
Water spots/streaksHard water deposits.Wipe the sink dry after each use. For existing spots, use a solution of water and white vinegar (1:1 ratio), then rinse and dry.
Minor scratchesNormal wear and tear, or contact with abrasive materials.Stainless steel is scratch-resistant but not scratch-proof. Over time, a patina will develop. For minor scratches, specialized stainless steel scratch removal kits may be used, following product instructions carefully.
Leaking around sink rimImproper sealing during installation.Re-seal the sink rim with a suitable silicone sealant. Professional assistance may be required.

8. Specifications

FeatureDetail
ManufacturerBlanco
Model Number522983
MaterialStainless Steel
Finish TypeStainless Steel (Satin)
StyleDouble Basin
Installation MethodUndermount
External Dimensions (L x W)745 x 440 mm
Basin Depth190 + 190 mm
Minimum Base Cabinet Width80 cm
Number of Basins2
Drain TypePop-Up (InFino Basket Strainer)
Product Weight6.05 Kilograms
ShapeRectangular

9. Warranty and Support

BLANCO products are manufactured to high-quality standards. This product comes with a warranty for spare parts availability for 2 years from the date of purchase.

For warranty claims, technical support, or to purchase spare parts, please contact your local BLANCO dealer or visit the official BLANCO website. Ensure you have your proof of purchase and the model number (522983) available when contacting support.

For detailed cut-out information and further product documentation, please refer to the BLANCO website: www.blanco.com

Related Documents - 522983

Preview BLANCO Kitchen Sinks: Installation, Dimensions, and Care Guide
Detailed installation guide and technical specifications for BLANCO kitchen sinks, including models like ANDANO, ETAGON, SOLIS, SUPRA, and S-STYLE. Features dimensions, care instructions, and contact information.
Preview Blanco Drop-in and Undermount Sink Installation Guide
Comprehensive installation instructions for Blanco stainless steel and Silgranit drop-in and undermount kitchen and bar sinks. Includes tools, materials, step-by-step procedures, and important notes for professional installers.
Preview BLANCO Kitchen Sinks: Installation, Care, and Specifications Guide
Comprehensive guide to installing and caring for BLANCO kitchen sinks, featuring detailed specifications for various models including A-STYLE, C-STYLE, S-STYLE, Z-STYLE, ANDANO, ETAGON, SOLIS, SUPRA, and YPSILON series.
Preview BLANCO Sink Installation Guide and Specifications
Comprehensive installation guide and detailed specifications for BLANCO sinks, including models like A-STYLE, C-STYLE, S-STYLE, Z-STYLE, ANDANO, ETAGON, SOLIS, SUPRA, and YPSILON. Learn about product care, dimensions, and installation requirements.
Preview BLANCO SILGRANIT® Sink Installation Guide and Specifications
This document provides installation instructions and technical specifications for BLANCO SILGRANIT® sinks. It includes step-by-step visual guides, material care information, and a comprehensive table of sink models with their dimensions and tolerances.
Preview BLANCO Sinks: Installation Guide and Specifications
Comprehensive installation guide and technical specifications for BLANCO sinks, including models like A-STYLE, C-STYLE, S-STYLE, Z-STYLE, ANDANO, ETAGON, SOLIS, SUPRA, and YPSILON.