One For All Universal Remote Smart Control URC7955 User Manual

Introduction

The One For All Universal Remote Smart Control URC7955 is designed to simplify your home entertainment experience by consolidating control of up to five devices into a single remote. This manual provides detailed instructions for setting up, operating, and maintaining your universal remote.

Product Overview

The URC7955 remote offers control over various device types, including TVs, Set-Top Boxes (STB), Blu-ray players, and Audio systems. Its smart control features allow for easy setup and personalized functionality.

Figure 1: Front view of the URC7955 Universal Remote, showing all buttons and layout.

Figure 2: Side view of the URC7955 Universal Remote, illustrating its ergonomic design.

Setup

1. Battery Installation

The URC7955 remote requires two AA batteries. To install:

1. Open the battery compartment cover on the back of the remote.
2. Insert two AA batteries, ensuring correct polarity (+ and -).
3. Close the battery compartment cover securely.

2. Device Setup and Programming

The URC7955 can be programmed using a free mobile application or by entering direct codes.

Using the Mobile Application (Recommended)

The One For All mobile app simplifies the setup process by guiding you through device pairing and code transfer via Bluetooth.

1. Download the One For All Setup App from your smartphone's app store.
2. Follow the on-screen instructions in the app to select your device types and brands.
3. The app will transfer the necessary control codes to your URC7955 remote.
4. Test the remote's functionality with your devices.

Figure 3: The URC7955 remote being configured using the dedicated smartphone application.

Manual Code Entry

If the app is not used, you can manually enter 4-digit setup codes for your devices. Refer to the code list provided with your remote or visit the One For All support website for the latest codes.

1. Press and hold the MAGIC button until the LED blinks twice.
2. Press the device key (e.g., TV, STB) you wish to set up. The LED will light up continuously.
3. Enter the 4-digit setup code for your device brand.
4. If the LED blinks twice and goes out, the code is stored. Test the remote. If the device does not respond, repeat the process with the next code for your brand.

Operating the Remote

Basic Functions

Once programmed, the remote's buttons will control the selected device. Use the device keys (TV, STB, BLU, AUDIO, DEVICES) to switch between controlling different devices.

• Power (Red Button): Turns the selected device on or off.
• Volume (+/-): Adjusts the volume of the currently selected audio device or TV.
• Channel (Up/Down): Changes channels on the selected TV or STB.
• Number Keys (0-9): For direct channel entry or other numerical inputs.
• Navigation Pad (Up/Down/Left/Right/OK): Used for menu navigation.
• MENU, GUIDE, INFO, BACK, EXIT: Standard functions for navigating device menus and content.

Activity Control

The ACTIVITY button allows you to control multiple devices simultaneously for a specific activity, such as "Watch TV" or "Watch Movie." This feature can be configured via the mobile app or manual programming to send commands to different devices with a single button press.

Learning Functions

The URC7955 can learn functions directly from your original remote controls. This is useful for commands not present in the universal remote's code database or for customizing button assignments.

1. Place the URC7955 and your original remote on a flat surface, facing each other, about 1-2 inches apart.
2. Press and hold the MAGIC button until the LED blinks twice.
3. Press the device key (e.g., TV) you want to learn a function for.
4. Press the button on the URC7955 you wish to program. The LED will blink rapidly.
5. Press and hold the corresponding button on your original remote until the URC7955 LED blinks twice. This indicates successful learning.
6. Repeat for other buttons or press MAGIC to exit learning mode.

Macro Functions

The remote supports macro functions, allowing you to program a sequence of up to 15 commands to a single button. This can be configured through the app or manual programming steps detailed in the full manual.

Maintenance

Cleaning

To clean your remote, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

Battery Replacement

Replace the AA batteries when the remote's response becomes sluggish or the LED indicator blinks unusually. Always replace both batteries at the same time with new ones of the same type.

Troubleshooting

• Remote not responding: Check battery installation and ensure batteries are fresh. Point the remote directly at the device.
• Device not controlling: Verify that the correct device key (e.g., TV, STB) is selected. Re-enter the setup code or try a different code for your device brand. Ensure the remote is within range and there are no obstructions.
• Some buttons not working: If specific buttons do not function, try the learning function to copy them from your original remote. Ensure the device is in the correct mode for the button's function.
• LED indicator issues: Refer to the full manual for specific LED blink patterns and their meanings. A rapidly blinking LED during setup often indicates an issue with code entry or learning.

Specifications

Support

For further assistance, updated device codes, or troubleshooting not covered in this manual, please visit the official One For All support website or contact their customer service. Support contact information can typically be found on the One For All website or product packaging.

Website: www.oneforall.com/support