Performance Tool W50086 3/8" Drill with Keyless Chuck User Manual

1. Introduction

Thank you for choosing the Performance Tool W50086 3/8" Drill with Keyless Chuck. This manual provides important information regarding the safe operation, maintenance, and troubleshooting of your new power drill. Please read it thoroughly before use and retain it for future reference.

Image 1: The Performance Tool W50086 3/8" Drill with Keyless Chuck. This image shows the gray drill with a black keyless chuck, yellow trigger, and black power cord.

2. Important Safety Information

Always follow basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury.

General Power Tool Safety Warnings:

• Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Avoid body contact with earthed or grounded surfaces.
• Personal Safety: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

3. Package Contents

Upon unpacking, ensure all items listed below are present and undamaged. If any parts are missing or broken, please contact Performance Tool customer service.

• 1 x Performance Tool W50086 3/8" Drill with Keyless Chuck
• 1 x Instruction Manual (this document)

Image 2: The Performance Tool W50086 3/8" Drill in its retail packaging. The box highlights features like "400 Watt," "Keyless Chuck," and "Reversible Motor."

4. Product Features

The Performance Tool W50086 drill is designed for various household tasks, offering convenience and control.

• 3/8 inch Keyless Chuck: Accommodates small to medium drill bits without the need for a chuck key.
• 400 Watt, 3.8 Amp, 120V Motor: Provides sufficient power for most common household drilling applications.
• Variable Speed Reversible: Allows for precise control over drilling speed and enables both forward and reverse rotation.
• Built-in Belt Clip: Enhances safety and portability by allowing the drill to be securely attached to a belt.
• 6 ft. 2-pronged Power Cord: Provides ample reach for various tasks.

5. Setup and Assembly

5.1 Attaching a Drill Bit

1. Ensure the drill is unplugged from the power source before attaching or removing any accessories.
2. Grasp the front half of the keyless chuck and rotate it counter-clockwise until the chuck jaws are open wide enough to insert the drill bit.
3. Insert the shank of the drill bit fully into the chuck jaws.
4. Rotate the front half of the keyless chuck clockwise until the jaws firmly grip the drill bit. Hand-tighten securely.
5. Gently pull on the drill bit to ensure it is properly secured and will not slip during operation.

5.2 Power Connection

• Connect the 2-pronged power cord to a standard 120V AC electrical outlet.
• Ensure the outlet is in good condition and provides stable power.

6. Operating Instructions

6.1 Starting and Stopping the Drill

• To start the drill, press the trigger switch.
• To stop the drill, release the trigger switch.
• For continuous operation, press the trigger switch and then press the lock-on button (if present, typically a small button on the side of the handle). To release, press the trigger switch again.

6.2 Variable Speed Control

The drill features variable speed control. The speed of the drill is proportional to how far the trigger switch is pressed. This allows for precise control, especially when starting a hole or working with delicate materials.

6.3 Forward/Reverse Operation

A forward/reverse switch (typically a lever above the trigger) controls the direction of rotation. Push the lever to the left for forward rotation (drilling) and to the right for reverse rotation (removing screws or freeing jammed bits). Always ensure the drill has come to a complete stop before changing the direction of rotation.

6.4 Using the Belt Clip

The built-in belt clip allows for convenient temporary storage of the drill when not in active use, keeping it within reach and reducing the risk of dropping. Ensure the drill is off and the chuck is clear of any obstructions before using the belt clip.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your drill.

• Cleaning: Disconnect the drill from the power source. Use a clean, damp cloth to wipe down the exterior of the tool. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris.
• Chuck Maintenance: Periodically clean the chuck jaws to ensure proper gripping of bits.
• Cord Inspection: Regularly inspect the power cord for any signs of damage, cuts, or fraying. If damaged, have it repaired by a qualified technician.
• Storage: Store the drill in a dry, secure location out of reach of children and away from direct sunlight or extreme temperatures.

8. Troubleshooting

If you encounter issues with your drill, refer to the following table for common problems and solutions.

9. Specifications

10. Warranty and Customer Support

Performance Tool products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Performance Tool website. If you have any questions, require technical assistance, or need to report a defect, please contact Performance Tool customer service directly.

Manufacturer: Performance Tool

Website: Visit the Performance Tool Store on Amazon (for general brand information)