ClosetMaid 1311 Rectangular Wood Coffee Table User Manual

Introduction

This manual provides essential information for the assembly, use, and maintenance of your ClosetMaid 1311 Rectangular Wood Coffee Table with Storage Shelves. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The ClosetMaid 1311 Rectangular Wood Coffee Table in a natural wood finish, featuring two open storage compartments and black metal legs.

Important Safety Information

WARNING: This product can expose you to formaldehyde, which is known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

• Always assemble the product on a soft, clean surface to prevent scratches.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not overload shelves. Distribute weight evenly.
• For safety, it is recommended to secure the product to a wall if a television or heavy items are placed on top, especially in households with children or pets. Wall mounting hardware is included.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Setup and Assembly

Follow these steps carefully to assemble your coffee table. A Phillips head screwdriver and a hammer (for dowels) may be required (not included).

1. Prepare Components: Lay out all wood panels and hardware on a clean, soft surface to prevent damage. Identify the Top Shelf, Bottom Shelf, and three Dividers.
2. Attach Cam Posts and Dowels: Insert cam posts into the pre-drilled holes on the edges of the dividers and shelves as indicated in the instruction sheet. Gently tap dowels into their respective holes.
3. Assemble Shelves and Dividers: Connect the dividers to the top and bottom shelves using the cam locks and screws. Ensure the cam locks are fully engaged by turning them clockwise until snug.
4. Attach Metal Frames (Legs): Secure the two metal frames to the underside of the assembled table using the 18 leg screws. Ensure they are aligned properly and tightened firmly.
5. Optional Wall Anchoring: For added stability and safety, especially if placing a TV or heavy items, use the provided L brackets, wall screws, and anchors to secure the table to a wall. Choose a suitable location and follow standard wall anchoring procedures.

Image: The assembled coffee table positioned in a living room, showcasing its use for storing books and displaying decorative items.

Operating and Usage

The ClosetMaid 1311 Coffee Table is designed for versatile use in various home environments.

• Coffee Table Functionality: Place in front of a sofa or seating area for convenient access to beverages, snacks, and reading materials.
• Storage and Display: Utilize the two open compartments for organizing books, magazines, remote controls, or displaying decorative items.
• Entertainment Unit: The sturdy design can support a small television. If used as an entertainment unit, consider securing the table to the wall using the provided anti-tip hardware.
• Versatile Placement: Suitable for living rooms, bedrooms, or even home offices as a low-profile storage and display solution.

Image: A detailed view of the coffee table's surface and storage compartments, illustrating its capacity for everyday items such as books, magazines, and decorative accents.

Maintenance and Care

To ensure the longevity and appearance of your coffee table, follow these care instructions:

• Cleaning: Wipe with a dry cloth to remove dust and light spills. Avoid abrasive cleaners or harsh chemicals, which can damage the laminate finish.
• Spills: Promptly wipe up any liquid spills to prevent staining or warping of the wood material.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
• Heat Protection: Use coasters or protective pads under hot items to prevent heat damage to the surface.
• Hardware Check: Periodically check all screws and cam locks to ensure they remain tight. Re-tighten as needed to maintain structural integrity.

Troubleshooting

If you encounter any issues with your coffee table, refer to the following common solutions:

• Wobbly Table:
  • Ensure all leg screws and cam locks are fully tightened.
  • Verify that the table is placed on a level surface. Adjust furniture glides if necessary.
• Missing or Damaged Parts:
  • Refer to the "Package Contents" section to confirm all parts were received.
  • Contact ClosetMaid customer support for replacement parts.
• Difficulty Assembling:
  • Review the "Setup and Assembly" section carefully, paying attention to diagrams (if available in the physical manual).
  • Ensure components are oriented correctly before tightening hardware.

Specifications

Image: A technical diagram illustrating the overall dimensions of the coffee table, including width (39.45 in.), depth (15.75 in.), and height (15.72 in.).

Image: A detailed diagram highlighting the internal dimensions of the shelf compartments, measuring approximately 18.66 inches in width and 6.66 inches in height.

Warranty Information

ClosetMaid offers a limited warranty for this product:

• The manufacturer will replace any missing or damaged part due to a manufacturer defect for 30 days after purchase.
• Proof of purchase is required for all warranty claims.
• Combining ClosetMaid branded products with third-party components or products will void the ClosetMaid manufacturer’s warranty.

Customer Support

For assistance with assembly, missing parts, or any other inquiries regarding your ClosetMaid 1311 Coffee Table, please visit the official ClosetMaid website or contact their customer service department.

You can find more information and support resources at the ClosetMaid Store on Amazon.