1. Introduction
The Subaru Multi-Purpose Fuse (Model 82211FC080) is an essential electrical safety device designed to protect vehicle circuits from overcurrent conditions. This fuse is rated at 50A (B2-Type 80A) and is crucial for preventing damage to electrical components by interrupting the circuit when current levels become excessively high. This manual provides guidance on its compatibility, installation, function, and general care.
2. Product Overview
Figure 2.1: Front view of the Subaru Multi-Purpose Fuse, showing the 80A rating and transparent cover.
Figure 2.2: Angled view of the Subaru Multi-Purpose Fuse, highlighting the metal terminals and clear casing.
Figure 2.3: Size comparison of the Subaru Multi-Purpose Fuse, indicating approximate dimensions of 0.9 inches (2 cm) in height.
3. Compatibility
This multi-purpose fuse is compatible with various Subaru models and years. Please verify compatibility with your vehicle's manufacturer specifications before installation, as fitment may vary by specific vehicle grade and year.
- Fits Models: Impreza 2D Coupe, Impreza HT Sedan, Impreza 4D Sedan, Impreza SP Wagon, Impreza 5D Wagon, Forester 5D Wagon
- Compatible Model Codes: GC1, GC2, GC4, GC6, GC8, GD2, GD3, GD9, GDA, GDB, GDC, GDD, GF1, GF2, GF3, GF4, GF5, GF6, GF8, GFA, GG3, GG, GGC, GGD, SF5, SF9
- Fits Years: 1996/10 - 2007/04
4. Installation / Setup
Installation of this fuse typically involves replacing an existing fuse. Always ensure the vehicle's ignition is off and the battery is disconnected before working on electrical systems to prevent electrical shock or damage to components.
- Safety First: Disconnect the negative terminal of the vehicle's battery.
- Locate Fuse Box: Refer to your vehicle's owner's manual to locate the relevant fuse box (engine compartment or interior).
- Identify Blown Fuse: Visually inspect fuses for a broken filament or discolored casing. Use a fuse puller tool if available.
- Remove Old Fuse: Carefully pull out the old, blown fuse.
- Insert New Fuse: Insert the new Subaru Multi-Purpose Fuse (Model 82211FC080) into the correct slot, ensuring it is firmly seated. Do not force it.
- Reconnect Battery: Reconnect the negative terminal of the battery.
- Test System: Turn on the ignition and test the electrical system that the fuse protects to ensure proper function.
If you are unsure about any step, it is recommended to consult a qualified automotive technician.
5. Operation
The Subaru Multi-Purpose Fuse operates passively as a sacrificial device. When the electrical current flowing through the circuit exceeds the fuse's rated amperage (50A / B2-Type 80A), the internal element melts, creating an open circuit. This action immediately stops the flow of electricity, protecting sensitive components and wiring from damage due to overcurrent or short circuits. A properly functioning fuse requires no active user intervention during operation.
6. Maintenance
Fuses are generally maintenance-free components. However, periodic visual inspection during routine vehicle maintenance is recommended. Check for any signs of corrosion on the terminals or cracks in the fuse body. If the fuse appears damaged or shows signs of overheating (e.g., melted plastic), it should be replaced immediately, even if it has not yet blown.
7. Troubleshooting
The primary symptom of a blown fuse is the malfunction or complete failure of the electrical component or system it protects (e.g., lights not working, radio off, power windows inoperable). If a fuse blows:
- Identify the Affected System: Determine which electrical system has stopped working.
- Locate the Corresponding Fuse: Consult your vehicle's owner's manual to find the fuse associated with the malfunctioning system.
- Inspect the Fuse: Remove the fuse and visually inspect its filament. A broken or melted filament indicates a blown fuse.
- Replace with Correct Rating: Replace the blown fuse with a new fuse of the exact same amperage rating (e.g., 50A or B2-Type 80A for this product). Using a fuse with a higher rating can lead to severe electrical damage or fire.
- Investigate Root Cause: If a fuse blows repeatedly, it indicates an underlying electrical problem (e.g., a short circuit, overloaded circuit). Do not continue to replace fuses without addressing the root cause, as this can cause significant damage. Seek professional assistance if the issue persists.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Subaru |
| Model Number | 82211FC080 |
| Type | Multi-Purpose Fuse |
| Amperage Rating | 50A (B2-Type 80A) |
| Package Dimensions | 2.95 x 2.64 x 0.51 inches |
| Item Weight | 0.71 ounces |
| Manufacturer | Subaru |
| ASIN | B01N1NNTKO |
| Date First Available | June 10, 2023 |
9. Warranty Information
Specific warranty details for the Subaru Multi-Purpose Fuse (Model 82211FC080) are not provided in the available product information. For warranty inquiries, please refer to your original purchase documentation or contact an authorized Subaru dealership or parts supplier.
10. Customer Support
For technical assistance, installation guidance, or further questions regarding the Subaru Multi-Purpose Fuse, please contact your local authorized Subaru service center or refer to the official Subaru website for customer support contact information. Specific customer support details are not provided in this document.