Introduction
The Armytek Wizard Pro v3 XHP50 is a versatile and powerful USB magnetic rechargeable headlamp designed for various applications. This manual provides essential information for the safe and effective use of your headlamp, including setup, operation, maintenance, and technical specifications.
This rechargeable version features a magnetic charging base, a USB charging cable, and a high-capacity battery, offering convenience and extended runtimes. Its robust design ensures durability and reliable performance in challenging conditions.
Setup
1. Battery Installation
The Wizard Pro v3 comes with a rechargeable battery. To install or access the battery, unscrew the tailcap of the headlamp. Insert the battery with the positive (+) terminal facing towards the head of the flashlight. Securely screw the tailcap back on.
Image: Hands demonstrating how to unscrew the tailcap of the headlamp to install or remove the battery.
2. Charging the Battery
The headlamp features a magnetic charging system. Attach the magnetic USB charging cable to the tailcap of the headlamp. The cable will magnetically snap into place. Plug the USB end of the cable into any standard USB power source (e.g., wall adapter, power bank, computer USB port, car charger). An indicator light on the charger will show the charging status.
Image: The headlamp being charged via its magnetic USB cable, resting on a natural surface.
Image: The headlamp charging inside a car, demonstrating its portability and convenience.
3. Attaching the Headband
The headlamp comes with a comfortable headband for hands-free operation. Slide the headlamp into the silicone mount on the headband. Adjust the straps for a secure and comfortable fit on your head. The headband is designed for reliable fixation, preventing slippage even during active movement.
Image: The headlamp attached to its adjustable headband, ready for use.
4. Using the Clip and Lanyard
The Wizard Pro v3 includes a removable clip and a strong lanyard for versatile carrying options. The clip allows attachment to pockets, belts, or gear, while the lanyard provides extra security against drops. The removable magnet in the tailcap also enables attachment to metal surfaces for hands-free illumination.
Image: The headlamp worn on a wrist, showcasing its adaptability beyond head-mounted use.
Operating Instructions
The headlamp features a side switch for easy one-hand operation and mode switching.
1. Power On/Off
- To Turn On: Press the side switch once.
- To Turn Off: Press and hold the side switch.
2. Mode Switching
The Wizard Pro v3 offers multiple brightness levels and strobe modes. A single press of the side switch cycles through the main brightness modes. Double-clicking or triple-clicking the switch typically accesses different mode groups (e.g., Firefly, Main, Turbo, Strobe). Refer to the detailed mode table below for specific operations.
Image: The Armytek Wizard Pro v3 headlamp, highlighting the location of the side switch for operation.
3. Output Levels and Runtimes
The headlamp provides a range of output levels to suit various needs, from ultra-low moonlight modes to powerful turbo modes. Runtimes are approximate and may vary based on environmental conditions and battery state.
| Mode | Output (Lumens) | Runtime |
|---|---|---|
| Turbo2 | 2300lm | 1h |
| Turbo1 | 1250lm | 1h 40min |
| Main3 | 500lm | 4h 10min |
| Main2 | 210lm | 10h 40min |
| Main1 | 40lm | 50h |
| Firefly3 | 7lm | 12d |
| Firefly2 | 2lm | 40d |
| Firefly1 | 0.25lm | 200d |
| Strobe3 | 10Hz, Turbo2 | 2h |
| Strobe2 | 1Hz, Turbo2 | 3.5h |
| Strobe1 | 1Hz, Main2 | 35h |
Maintenance
1. Cleaning
Regularly clean the headlamp's body with a soft, damp cloth. Ensure the lens is free from dirt and debris to maintain optimal light output. Avoid using harsh chemicals or abrasive materials that could damage the finish or lens coating.
2. Battery Care
- Always use the recommended rechargeable battery.
- Charge the battery fully before first use and whenever the light output diminishes.
- If storing the headlamp for an extended period, remove the battery to prevent potential leakage and store it in a cool, dry place.
3. Water Resistance
The Armytek Wizard Pro v3 offers total protection from water, dirt, and dust penetration, capable of functioning even at a depth of 10 meters. Ensure the tailcap is fully tightened to maintain its waterproof rating.
Troubleshooting
If you encounter issues with your Armytek Wizard Pro v3 headlamp, consider the following common troubleshooting steps:
- Light Not Turning On:
- Check if the battery is correctly installed with the positive (+) terminal facing the head.
- Ensure the battery is charged. Try charging the headlamp for a few hours.
- Verify that the tailcap is fully tightened. A loose tailcap can break the electrical connection.
- Light Output is Dim or Flickering:
- The battery may be low. Recharge the battery.
- Clean the battery contacts and the tailcap threads. Dirt or corrosion can interfere with conductivity.
- Charging Not Working:
- Ensure the magnetic charging cable is securely attached to the tailcap.
- Try a different USB power source or USB cable to rule out a faulty charger/cable.
- Check for any debris on the magnetic charging contacts on both the headlamp and the cable.
If these steps do not resolve the issue, please refer to the Support section for further assistance.
Specifications
Below are the key technical specifications for the Armytek Wizard Pro v3 XHP50 Headlamp:
| Feature | Specification |
|---|---|
| LED | Cree XHP50 (White) |
| LED Light Output | 2300 lumens |
| Beam Distance | 108 meters |
| Peak Beam Intensity | 2900 cd |
| Optics | TIR-optics |
| Hotspot / Spill | 70° / 120° |
| Impact Resistance | Withstands drops from 10 meters |
| Water Resistance Level | Waterproof (Total protection, works at 10 meters depth) |
| Body Material | Aircraft-grade aluminum |
| Body Finish | Premium type III hard anodizing 400HV, Mat Black |
| Bezel Material | Stainless steel with ultrahard titanium coating |
| Battery Type | Lithium Ion (1 CR123A battery required) |
| Charging | USB Magnetic Rechargeable |
| Item Weight | 65 Grams (2.29 ounces) |
| Included Components | USB Cable |
Warranty and Support
Warranty Information
For detailed warranty information regarding your Armytek Wizard Pro v3 XHP50 headlamp, please refer to the documentation included with your purchase or visit the official Armytek website. Warranty terms typically cover manufacturing defects and material flaws under normal use.
Customer Support
If you require further assistance, have questions about your product, or need to report an issue, please contact Armytek customer support. You can often find support resources and contact information on the official Armytek website or through their official store on Amazon:
