Quoizel TFIK8407VA Inglenook Tiffany Style Outdoor Wall Sconce Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Quoizel TFIK8407VA Inglenook Tiffany Style Outdoor Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Quoizel TFIK8407VA is a 1-light outdoor wall sconce featuring a classic geometric Tiffany glass panel shade and a Valiant Bronze finish. It is designed for outdoor wet locations and accommodates one 100-watt A19-type incandescent bulb (not included).

2. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Improper installation can result in electric shock or fire.

• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• This fixture is ETL Approved for WET Locations, ensuring its suitability for outdoor use where it may be exposed to rain or moisture.
• Do not exceed the maximum wattage specified for the bulb.
• Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Package Contents

Verify that all parts listed below are included in your package:

• Outdoor Wall Sconce Fixture (1)
• Mounting Hardware (for existing junction box)

Note: Bulb(s) are not included and must be purchased separately.

4. Specifications

5. Setup and Installation

Before installation, ensure the power is turned off at the circuit breaker or fuse box.

5.1. Prepare for Installation

1. Unpack the fixture and its components. Inspect for any damage.
2. Ensure you have all necessary tools (e.g., screwdriver, wire strippers, electrical tape).
3. Turn off the main power supply to the junction box where the fixture will be installed.

5.2. Mounting the Fixture

The fixture is designed for wall-mounted installation to an existing junction box. Mounting hardware is included.

• Attach the mounting bracket to the junction box using the provided screws.
• Make electrical connections: Connect the fixture's black wire to the house's black (hot) wire, the fixture's white wire to the house's white (neutral) wire, and the fixture's ground wire to the house's ground wire. Secure connections with wire nuts.
• Carefully tuck all wires into the junction box.
• Align the fixture's backplate with the mounting bracket and secure it with the provided screws.

5.3. Recommended Installation Height

For optimal aesthetic and light distribution, consider the following guidelines for mounting height:

• When installing next to a door, the center of the fixture should typically be between 60 to 65 inches from the ground.
• Alternatively, the top of the fixture can be positioned at approximately one-quarter of the door's height from the top.

Figure 1: Product Dimensions (10.5" H x 7" W, Backplate 4.5" W x 6.5" H)

Figure 2: Recommended Installation Height (60-65 inches from ground)

6. Operating Instructions

6.1. Bulb Installation

1. Ensure power is off before installing the bulb.
2. Carefully screw an E26 medium base bulb into the socket. Do not overtighten.
3. The fixture supports a maximum of 100-watt A19-type incandescent bulbs. It is also compatible with equivalent CFL, Halogen, or LED bulbs.

6.2. Powering On

Once the fixture is securely installed and the bulb is in place, restore power at the circuit breaker or fuse box. The light can then be operated via your wall switch.

6.3. Dimming Functionality

This fixture is dimmable when used with a compatible dimmable bulb and a dimmer switch (both sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.

7. Maintenance

Regular maintenance will help preserve the appearance and functionality of your outdoor wall sconce.

7.1. Cleaning

• Always disconnect power before cleaning.
• Wipe the fixture with a soft, dry, or slightly damp cloth.
• Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
• Clean the Tiffany glass panels gently to avoid damage.

7.2. Bulb Replacement

• Ensure power is off and the bulb has cooled completely before attempting to replace it.
• Unscrew the old bulb and screw in a new E26 medium base bulb, ensuring it does not exceed 100 watts.

7.3. Periodic Inspection

Periodically check all electrical connections and mounting hardware to ensure they remain secure, especially after severe weather conditions.

8. Troubleshooting

9. Warranty

This Quoizel product is covered by a 3-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For specific details regarding warranty claims, please refer to the warranty documentation included with your purchase or contact Quoizel customer support.

10. Support

For further assistance, technical support, or inquiries regarding your Quoizel TFIK8407VA Inglenook Tiffany Style Outdoor Wall Sconce, please contact Quoizel customer service. Refer to the contact information provided in your product packaging or on the official Quoizel website.

Figure 3: Quoizel TFIK8407VA Outdoor Wall Sconce