Introduction
This manual provides instructions for the ZdalaMit AKB73655861 Replacement TV Remote Control. This remote is designed to function as a direct replacement for the original LG remote control, requiring no programming. Simply insert batteries to begin operation.
Image 1: Front view of the ZdalaMit AKB73655861 replacement TV remote control. This image displays the full layout of buttons, including power, number pad, navigation, and media controls.
Compatibility
The AKB73655861 remote control is compatible with a wide range of LG LCD and LED TV models. A partial list of compatible models includes:
- 19LS3500, 22LS3500, 22LT360C
- 26CS460, 26LS3500, 26LT360C
- 32CS460, 32LS3400, 32LS3450, 32LS3500, 32LS5600, 32LT360C
- 37LS5600, 37LT360C
- 42CS460, 42LS3400, 42LS5600, 42PA4500
- 47LS5600, 42LS345T
- 32CS560, 37CS560, 42CS560
- 42LS349C, 32LS3410UB, 32LS3400UA
- 42CS560UE, 32CS460UC, 32CS560UE, 37CS560UE
- 42LS3400UA, 42PA4500UF
If your LG TV model is not listed, please refer to your TV's original manual or contact support to confirm compatibility.
Setup
Battery Installation
The remote control requires two (2) 1.5V AAA alkaline batteries (not included).
- Locate the battery compartment cover on the back of the remote control.
- Press down on the tab and slide the cover off in the direction of the arrow.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote is ready for immediate use with compatible LG TV models; no programming is required.
Image 2: Angled view of the remote control, showing its ergonomic design. The battery compartment is located on the back.
Operating Instructions
This section outlines the basic functions of the remote control buttons.
- POWER: Turns the TV on or off.
- TV/RAD: Switches between TV and Radio modes (if supported by your TV).
- Number Buttons (0-9): Directly select channels.
- LIST: Displays the channel list.
- Q.VIEW: Returns to the previously viewed channel.
- INPUT: Selects the input source (e.g., HDMI, AV).
- INFO: Displays information about the current program.
- ENERGY SAVING: Adjusts the TV's energy saving mode.
- RATIO: Changes the screen aspect ratio.
- SETTINGS: Accesses the TV's main settings menu.
- Q.MENU: Accesses the Quick Menu for common settings.
- Navigation Buttons (Up, Down, Left, Right): Navigate through menus and options.
- OK: Confirms selections in menus.
- EXIT: Exits the current menu or function.
- BACK (Curved Arrow): Returns to the previous screen or step.
- VOLUME +/-: Adjusts the volume level.
- CHANNEL P +/-: Changes channels up or down.
- MUTE: Mutes or unmutes the TV audio.
- FAV: Accesses favorite channels.
- AD: Audio Description (if available).
- PAGE +/-: Navigates through pages in certain menus or teletext.
- Color Buttons (Red, Green, Yellow, Blue): Functionality varies depending on the TV menu or interactive services.
- Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward, Skip Back, Skip Forward): Controls media playback on compatible devices or TV functions.
- SUBTITLE: Toggles subtitles on/off.
- TEXT: Accesses Teletext (if available).
- T.OPT: Teletext Options.
Image 3: A close-up angled view of the remote control, highlighting the various buttons and their labels for easy identification during operation.
Maintenance
Battery Replacement
Replace batteries when the remote control's response becomes sluggish or inconsistent. Always replace both batteries simultaneously with new 1.5V AAA alkaline batteries.
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or excessive moisture, as this can damage the remote's electronics.
Troubleshooting
Remote Control Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new 1.5V AAA alkaline batteries.
- Line of Sight: Ensure there is a clear line of sight between the remote control and the TV's infrared sensor. Obstructions can block the signal.
- Remote Sensor: Verify that the TV's remote sensor is not blocked or dirty.
- TV Power: Confirm that the TV is powered on and not in standby mode.
- Interference: Strong light sources (e.g., direct sunlight, fluorescent lights) can sometimes interfere with the remote's signal. Try operating the remote in different lighting conditions.
If the issue persists after performing these checks, the remote control or the TV's IR receiver may require service.
Specifications
| Model Number | AKB73655861 |
| Brand | ZdalaMit |
| Power Supply | 2 x 1.5V AAA Alkaline Batteries (not included) |
| Dimensions (L x W x H) | 7.42 x 2.06 x 0.55 inches (18.85 x 5.23 x 1.4 cm) |
| Item Weight | 2 ounces (56.7 grams) |
| Color | Black |
| Special Feature | Pre-Programmed (No setup required) |
| Compatible Devices | LG Televisions |
Image 4: The remote control shown with its approximate length (7.3 inches) and width (2.0 inches) indicated by blue measurement lines.
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the retailer's return policy or contact the manufacturer, ZdalaMit, directly. Contact details are typically available on the product packaging or the retailer's website.