Southwire 68580055

Download PDF
Contents

Southwire 12/2 Solid CU MC Lite Cable

Model: 68580055

1. Introduction

This manual provides essential information for the safe and effective use of the Southwire 68580055 250 ft 12/2 solid CU MC Lite Cable. This armored cable is designed for various electrical wiring applications, offering protection and durability. Please read this manual thoroughly before installation or use to ensure proper handling and compliance with all applicable electrical codes.

2. Safety Information

WARNING: Electrical work can be dangerous and should only be performed by qualified personnel. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

  • Always disconnect power at the main service panel before working with electrical wiring.
  • Ensure all local and national electrical codes (e.g., NEC) are strictly followed during installation.
  • Use appropriate personal protective equipment (PPE), including insulated gloves and safety glasses.
  • Verify voltage ratings and cable specifications match the requirements of your application. This cable is rated for 600 volts.
  • Do not install damaged cable. Inspect the cable for any signs of damage before installation.
  • Proper grounding is essential for safety. Ensure the aluminum armor is correctly grounded as per code.

3. Product Overview

The Southwire 68580055 MC Lite Cable is a 12/2 gauge solid copper conductor cable encased in a flexible aluminum interlocked armor. It is suitable for use in various commercial, industrial, and residential applications where armored cable is required or preferred. The cable includes two 12-gauge solid copper conductors (black and white) and an insulated green ground wire.

Southwire 12/2 Solid CU MC Lite Cable Coil

Figure 3.1: Southwire 12/2 Solid CU MC Lite Cable, showing the coil with product labels and specifications.

Southwire 12/2 Solid CU MC Lite Cable in packaging

Figure 3.2: Southwire 12/2 Solid CU MC Lite Cable as supplied, wrapped in protective plastic.

Cross-section of Southwire 12/2 Solid CU MC Lite Cable

Figure 3.3: Detailed view of the Southwire 12/2 Solid CU MC Lite Cable cross-section, showing the aluminum armor and internal conductors (black, white, and green ground).

4. Setup and Installation

Installation of MC Lite Cable requires specialized tools and knowledge. It is strongly recommended that installation be performed by a licensed electrician in accordance with all local and national electrical codes.

4.1. Preparation

  • Determine the required length of cable for your application, accounting for bends and connections.
  • Ensure the cable is free from kinks or damage before cutting.
  • Gather necessary tools: cable cutters, armor cutting tool (e.g., Roto-Split), reaming tool, anti-short bushings (redheads), and appropriate connectors/fittings.

4.2. Cutting and Termination

  1. Use an armor cutting tool to carefully cut the aluminum armor without damaging the internal conductors.
  2. Twist the armor to separate the cut section and remove it.
  3. Insert an anti-short bushing (redhead) between the conductors and the cut edge of the armor to protect the insulation from abrasion.
  4. Strip the insulation from the individual conductors to the appropriate length for your connector.
  5. Secure the cable using approved MC cable connectors and fittings into junction boxes, panels, or fixtures. Ensure the armor is properly grounded through the connector.

4.3. Routing and Securing

  • Route the cable along approved pathways, avoiding sharp bends that could damage the armor or conductors.
  • Secure the cable using appropriate straps or clamps at intervals specified by electrical codes.
  • Ensure the cable is not subjected to excessive tension or compression.

5. Usage

Once properly installed, the Southwire 12/2 Solid CU MC Lite Cable functions as a permanent part of your electrical system. It is designed to safely transmit electrical power within its rated voltage and current limits. This cable is suitable for use in dry locations and can be installed in accordance with Article 330 of the National Electrical Code (NEC).

Common applications include:

  • Branch circuits and feeders.
  • Power, lighting, control, and signal circuits.
  • Concealed or exposed installations.
  • Environmental air-handling spaces (plenums).

6. Maintenance

MC Lite Cable is a low-maintenance component of an electrical system. Regular maintenance primarily involves periodic inspection of the installed cable and its connections.

  • Visual Inspection: Periodically inspect exposed sections of the cable for any signs of physical damage, corrosion, or overheating. Look for frayed armor, discolored insulation, or loose connections.
  • Connection Integrity: Ensure all cable connections within junction boxes, panels, and fixtures remain tight and secure. Loose connections can lead to overheating and potential fire hazards.
  • Environmental Factors: Verify that the cable is not exposed to conditions beyond its design parameters, such as excessive moisture, extreme temperatures, or corrosive chemicals, unless specifically rated for such environments.
  • Professional Assessment: If any issues are observed or suspected, consult a qualified electrician for assessment and repair. Do not attempt repairs on live electrical circuits.

7. Troubleshooting

Troubleshooting issues related to electrical cable typically involves identifying the source of an electrical fault rather than a problem with the cable itself, assuming proper installation. Always ensure power is disconnected before any troubleshooting.

  • No Power to Device/Outlet: Check circuit breakers or fuses at the main panel. Verify connections at the device/outlet and within junction boxes.
  • Intermittent Power: This could indicate a loose connection. Inspect all connections along the circuit path.
  • Burning Smell or Discoloration: Immediately disconnect power. This indicates overheating, likely due to an overloaded circuit, loose connection, or damaged insulation. Do not re-energize until the cause is identified and rectified by a professional.
  • Circuit Breaker Tripping: This is a safety mechanism indicating an overload or short circuit. Do not repeatedly reset the breaker without identifying the cause. Consult an electrician.

If you suspect the cable itself is damaged or faulty, it should be replaced by a qualified professional.

8. Specifications

AttributeValue
BrandSouthwire
Model Number68580055
Cable TypeMC Lite Cable
Gauge12 AWG
Number of Conductors2 (plus ground)
Conductor MaterialSolid Copper (CU)
Armor MaterialAluminum
Length250 ft
Voltage Rating600 Volts
ColorAluminum (armor)
Item Weight26.7 pounds
Product Dimensions25 x 25 x 10 inches (coil)
Included ComponentsCoil of Cable
UPC745577799888

9. Warranty and Support

For information regarding product warranty, technical support, or customer service, please refer to the official Southwire website or contact Southwire directly. Keep your purchase receipt as proof of purchase.

Southwire Contact Information:

  • Visit the Southwire Store on Amazon for product information.
  • Refer to the manufacturer's official website for the most current warranty terms and support resources.

© 2025 Southwire. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.