1. Introduction
Thank you for choosing the Beurer TL50 Daylight Lamp. This device is designed to simulate natural daylight, providing a bright and even illumination experience. It features UV-free LED technology and a large illumination surface, making it suitable for use in various indoor environments. Please read this manual carefully before first use and keep it for future reference.
2. Safety Information
Observe the following safety instructions to ensure safe operation and prevent damage:
- Always place the lamp on a stable, level surface to prevent it from tipping over.
- Ensure the power adapter is connected to a suitable power outlet.
- Do not expose the device to moisture or liquids.
- Do not open the device casing. Repairs should only be performed by authorized service personnel.
- Keep the lamp away from children and pets.
- Unplug the device from the power outlet before cleaning or if it will not be used for an extended period.
- Avoid direct, prolonged eye contact with the light source at close range.
3. Product Overview
The Beurer TL50 Daylight Lamp features a sleek, round design with a stable base. It provides 10,000 lux of UV-free light, simulating natural daylight.

Figure 1: Front view of the Beurer TL50 Daylight Lamp, showcasing its circular illumination surface and stable base.

Figure 2: Side view of the lamp, highlighting its UV-filtered LED technology, large 9.7-inch illuminated surface, award-winning design, and 10,000 lux output.

Figure 3: Rear view of the lamp, showing the single, easy-to-use power button located at the top edge and the power input port at the bottom.
4. Setup
- Unpack the Device: Carefully remove the Beurer TL50 Daylight Lamp and its accessories from the packaging.
- Inspect for Damage: Check the device and its components for any signs of damage. If damaged, do not use and contact customer support.
- Position the Lamp: Place the lamp on a flat, stable, and dry surface, such as a desk or table. Ensure there is adequate space around the lamp for ventilation.
- Connect Power: Insert the small end of the included AC adapter into the power input port on the back of the lamp. Plug the other end of the AC adapter into a suitable electrical outlet.

Figure 4: The Beurer TL50 lamp positioned on a desk, providing illumination while a user works on a laptop.
5. Operating Instructions
The Beurer TL50 Daylight Lamp is designed for simple, one-touch operation.
- Power On/Off: Press the power button located on the top edge of the lamp to turn the device on. Press the button again to turn it off.
- Usage Distance: For optimal effect, position the lamp approximately 4 inches (10 cm) from your face. The lamp provides 10,000 lux at this distance.
- Recommended Usage Duration: Consult with a healthcare professional for personalized recommendations. General guidelines suggest daily use, typically in the morning.

Figure 5: A user positioned in front of the Beurer TL50 lamp on a table, demonstrating typical usage.

Figure 6: Another example of a user engaging with the Beurer TL50 lamp, highlighting its integration into a daily routine.
6. Maintenance
Proper maintenance ensures the longevity and performance of your Beurer TL50 Daylight Lamp.
- Cleaning: Before cleaning, always unplug the device from the power outlet. Wipe the lamp's surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface.
- Storage: When not in use, store the lamp in a clean, dry place, away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter any issues with your Beurer TL50 Daylight Lamp, refer to the following table for potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power adapter not properly connected. | Ensure the power adapter is securely plugged into both the lamp and the electrical outlet. |
| Lamp flickers. | Unstable power supply or internal issue. | Try plugging the lamp into a different outlet. If the issue persists, contact customer support. |
| Light output seems dim. | Dust or dirt on the illumination surface. | Clean the illumination surface with a soft, dry cloth. |
If the problem persists after attempting these solutions, please contact Beurer customer support.
8. Specifications
Technical data for the Beurer TL50 Daylight Lamp:
- Model: TL50
- Light Intensity: Approximately 10,000 lux (at approx. 4 inches / 10 cm)
- Illumination Area: Ø9.7 inches (74 square inches)
- Spectrum: 400 - 800 nm
- Color Temperature: 5,300 K (daylight-like bright white)
- Technology: UV-free LED
- Product Dimensions: 9.7 x 5.7 x 10.6 inches (Length x Width x Height) / 10.5"D x 5"W x 11.5"H
- Product Weight: Approximately 1.43 lbs (lamp) + 0.38 lbs (power supply)
- Power Input: 110 watts (refer to power adapter for specific input requirements)
- Shade Color: White

Figure 7: A silhouette of a person next to the Beurer TL50 lamp, illustrating its relative size.

Figure 8: Top-down view of the Beurer TL50 lamp, indicating a diameter of approximately 10 inches (24 cm).
9. Warranty and Support
The Beurer TL50 Daylight Lamp comes with a standard manufacturer's warranty. Please refer to the documentation included with your product for specific warranty terms and conditions.
For any questions, technical assistance, or support, please contact Beurer North America LP customer service. Our team is available to assist you.
You can also refer to the official user manual PDF for more detailed information: Beurer TL50 User Manual (PDF)