1. Introduction
This manual provides detailed instructions for the safe and proper installation and operation of your LogiLink BP0007 Full Motion TV Wall Bracket. Please read this manual thoroughly before installation and retain it for future reference.
The LogiLink BP0007 is designed to securely mount flat-panel televisions ranging from 23 to 42 inches, with a maximum load capacity of 25 kg (55 lbs). It offers full motion capabilities, allowing for tilt and swivel adjustments to achieve optimal viewing angles.
Key Features:
- Full motion design: Tilt from -7.5° to +7.5°, Swivel from -90° to +90°.
- Adjustable wall distance: 72 mm to 196 mm.
- Compatible with VESA mounting patterns: 75x75, 100x100, 200x100, 200x200.
- Robust metal construction for secure mounting.
2. Safety Information
WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact a qualified installer.
- Do not exceed the maximum load capacity of 25 kg (55 lbs).
- Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
- Use only the provided mounting hardware. Do not use the product for any purpose not explicitly specified by the manufacturer.
- This product is intended for indoor use only.
- Always have at least two people for installation to prevent injury or damage.
- Check for hidden electrical wires, plumbing, or gas lines in the wall before drilling.
3. Package Contents
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact your retailer for assistance.
- 1 x LogiLink BP0007 TV Wall Bracket assembly
- 1 x Assembly / User Manual
- Mounting hardware kit (screws, anchors, washers, etc.)
Image: Overview of the LogiLink BP0007 TV Wall Bracket components, including the wall plate, articulating arm, and TV mounting plate.
4. Setup and Installation
Before beginning, ensure you have the necessary tools: stud finder, drill, level, screwdriver, and pencil. Always wear appropriate safety gear.
Step-by-Step Installation:
- Determine Mounting Location: Choose a suitable location on your wall. Use a stud finder to locate wooden studs for secure mounting. Mark the desired height for the top of your TV.
- Attach Wall Plate: Position the wall plate against the wall at the desired height. Use a level to ensure it is perfectly horizontal. Mark the drilling points through the holes on the wall plate. Drill pilot holes into the studs. Secure the wall plate to the wall using the appropriate lag bolts and washers provided.
- Attach TV Brackets to TV: Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the TV mounting plate to the back of your TV. Ensure the screws are tightened securely but do not overtighten.
- Mount TV to Wall Plate: With assistance, carefully lift the TV with the attached mounting plate. Hook the TV mounting plate onto the arm of the wall bracket. Ensure it is securely seated. Tighten any safety screws or locking mechanisms to prevent accidental dislodgement.
Image: The product packaging illustrating simplified installation steps for the LogiLink BP0007 TV Wall Bracket.
5. Operating and Adjustments
Once installed, your LogiLink BP0007 bracket allows for flexible positioning of your TV.
Adjusting Your TV:
- Swivel: Gently push or pull the TV to the desired left or right angle. The bracket allows for a swivel range of -90° to +90°.
- Tilt: To adjust the vertical viewing angle, gently tilt the TV up or down. The bracket supports a tilt range of -7.5° to +7.5°. Some models may have adjustment knobs or screws to secure the tilt angle; refer to your specific bracket for details.
- Extension/Retraction: The articulating arm allows you to extend the TV away from the wall (up to 196 mm) or push it closer (down to 72 mm) for optimal viewing distance.
Image: Technical drawing showing the dimensions, tilt, and swivel capabilities of the LogiLink BP0007 TV Wall Bracket.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV wall bracket.
- Cleaning: Wipe the bracket with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can loosen fasteners.
- Weight Limit: Do not hang additional items on the bracket or exceed the specified weight limit.
7. Troubleshooting
If you encounter issues with your LogiLink BP0007 TV Wall Bracket, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level. | Wall plate not installed level. | Remove TV, loosen wall plate screws, adjust with a level, and re-tighten. |
| Bracket feels unstable. | Loose mounting screws or inadequate wall support. | Ensure all wall screws are securely tightened into studs. Verify wall structure can support weight. |
| Difficulty adjusting tilt/swivel. | Adjustment bolts are too tight. | Slightly loosen the relevant adjustment bolts (if applicable) to allow for movement, then re-tighten to secure position. |
If the problem persists, contact LogiLink customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | BP0007 |
| Brand | LogiLink |
| Screen Size Compatibility | 23 - 42 inches |
| Maximum Load Capacity | 25 kg (55 lbs) |
| VESA Compatibility | 75x75, 100x100, 200x100, 200x200 |
| Tilt Angle | -7.5° / +7.5° |
| Swivel Angle | -90° / +90° |
| Wall Distance | 72 mm to 196 mm |
| Material | Metal |
| Color | Black |
| Product Dimensions (L x W x H) | 9.02 x 2.17 x 10.63 inches (approx.) |
| Item Weight | 1.46 kg (3.21 lbs) |
9. Warranty and Support
LogiLink products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or visit the official LogiLink website. Please retain your proof of purchase for warranty claims.
