1. Introduction
Thank you for choosing the Philips Shaver Series 9000 S9751/33. This advanced electric shaver is designed to provide an exceptionally close and comfortable shave, whether wet or dry. Featuring unique ContourDetect technology and the V-Track system, it adapts to your facial contours and guides hairs into the optimal cutting position. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
- This appliance is waterproof and can be used in the bath or shower. For safety reasons, the shaver can only be operated cordlessly.
- Only use the original charger supplied with the appliance.
- Do not use the appliance if it is damaged.
- Keep the appliance and charger away from heated surfaces.
- This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
3. Product Overview
The Philips Shaver Series 9000 S9751/33 comes with several components designed to enhance your grooming experience.
Image 3.1: The Philips Shaver Series 9000 S9751/33 electric shaver, SmartClean PLUS system, SmartClick Beard Styler, and SmartClick Oil-control cleansing brush. The shaver features a digital display and three rotary shaving heads. The SmartClean system is a black charging and cleaning dock. The attachments are shown separately.
Components Included:
- Philips Shaver Series 9000 S9751/33 Shaver Unit
- SmartClean PLUS System (Charging, Cleaning, Drying, Lubricating Station)
- SmartClean PLUS Cleaning Cartridge
- SmartClick Beard Styler attachment
- SmartClick Oil-control Cleansing Brush attachment
- Travel Pouch
- Power Adapter
4. Setup
4.1 Initial Charging
- Ensure the shaver is switched off.
- Connect the power adapter to the shaver and plug it into a wall socket.
- The battery indicator on the shaver's digital display will show charging progress. A full charge takes approximately 1 hour and provides up to 60 minutes of cordless shaving time.
4.2 Attaching/Detaching SmartClick Attachments
- To detach the shaving head, pull it upwards from the shaver body.
- To attach a SmartClick accessory (Beard Styler or Cleansing Brush), align it with the top of the shaver body and press it down until you hear a click.
- To detach a SmartClick accessory, pull it upwards.
5. Operating the Shaver
5.1 Basic Shaving (Wet or Dry)
- Dry Shaving: Ensure your face is clean and dry. Press the on/off button to start the shaver. Move the shaver in small, circular motions over your skin.
- Wet Shaving: Apply shaving foam or gel to your skin. Press the on/off button. Move the shaver in small, circular motions over your skin. Rinse the shaving heads under warm water during and after shaving to prevent clogging.
- The 8-direction ContourDetectHeads independently follow every curve of your face and neck, ensuring maximum skin contact and a close shave.
- The V-Track Precision Blades gently position each hair in the best cutting position, even flat-lying hairs and hairs of different lengths.
5.2 Using SmartClick Attachments
- SmartClick Beard Styler: Attach the beard styler. Use the zoom wheel to select your desired hair length setting. Move the styler against the direction of hair growth for an even trim.
- SmartClick Oil-control Cleansing Brush: Attach the cleansing brush. Dampen your face and apply your preferred facial cleanser. Gently move the brush in small circles over your face for approximately one minute. Rinse your face thoroughly afterwards.
5.3 Digital Display Indicators
- Battery Indicator: Shows the remaining battery percentage.
- Cleaning Indicator: Reminds you to clean the shaver after use.
- Travel Lock Indicator: Appears when the travel lock is activated to prevent accidental activation. To activate/deactivate, press and hold the on/off button for 3 seconds.
6. Maintenance
6.1 Manual Cleaning
- Switch off the shaver and disconnect it from the power supply.
- Press the release button to open the shaving head unit.
- Rinse the shaving unit thoroughly under warm running water.
- Shake off excess water and allow the shaving unit to air dry.
6.2 SmartClean System PLUS
The SmartClean System PLUS provides a convenient way to clean, lubricate, dry, and charge your shaver.
- Place the shaver upside down into the SmartClean system. Ensure it clicks into place.
- The system will automatically detect the shaver and initiate the cleaning cycle.
- The SmartClean system charges, cleans, dries, and lubricates the shaver, ensuring optimal performance and hygiene.
- Replace the cleaning cartridge when indicated by the SmartClean system or approximately every 3 months, depending on usage.
6.3 Replacing Shaving Heads
For optimal shaving performance, replace the shaving heads approximately every 12 months. Replacement heads are available from Philips retailers or online.
- Switch off the shaver and disconnect it from the power supply.
- Remove the shaving head unit by pulling it upwards.
- Remove the retaining ring by turning it counter-clockwise.
- Remove the old shaving heads and insert the new ones, ensuring they are correctly seated.
- Replace the retaining ring and turn it clockwise to secure.
- Reattach the shaving head unit to the shaver.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is empty; Travel lock is activated. | Charge the shaver; Deactivate travel lock by pressing and holding the on/off button for 3 seconds. |
| Poor shaving performance. | Shaving heads are dirty or worn out. | Clean the shaving heads thoroughly or replace them if they are older than 12 months. |
| Shaver does not charge. | Power adapter not properly connected; Faulty adapter. | Ensure the adapter is securely connected to both the shaver and the wall socket. Try a different power outlet. If the issue persists, contact Philips customer support. |
| SmartClean system not working. | Shaver not correctly placed; Cleaning cartridge empty. | Ensure the shaver is securely placed in the SmartClean system. Replace the cleaning cartridge if empty. |
8. Specifications
- Model: S9751/33
- Product Name: Wet And Dry Electric Shaver
- Dimensions: 11.31 x 7.24 x 16.38 cm
- Item Weight: 1.13 Kilograms
- Power Source: Corded Electric (for charging)
- Blade Material: Stainless Steel
- Head Type: Foil | Pivoting (8-direction ContourDetectHeads)
- Included Components: Cleansing Brush, Beard Styler, Cleaning Station
- Recommended Product Uses: Wet Shaving, Dry Shaving
9. Warranty and Support
This Philips appliance comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Philips website. For technical support, replacement parts, or service, please contact Philips customer support in your region.
