1. Introduction
This manual provides detailed instructions for the safe and efficient use of your Brother P-Touch H110 Label Maker. Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
2. Product Overview
The Brother P-Touch H110 is a portable label maker designed for creating durable, high-quality labels for various organizational needs. It features a QWERTZ keyboard for easy text input and a clear LCD display.
Figure 2.1: Front view of the Brother P-Touch H110 Label Maker, showing the QWERTZ keyboard, function buttons, and LCD screen displaying "P-touch H110".
Key Features:
- QWERTZ keyboard layout for efficient typing.
- 180 dpi print resolution for clear and crisp labels.
- Lightweight and portable design for use anywhere.
- Supports various label tape widths and colors.
3. Setup
3.1. Power Supply
The Brother P-Touch H110 operates on 6 AAA alkaline batteries. An optional AC adapter (not included) can also be used.
- Ensure the device is turned off.
- Locate the battery compartment cover on the back of the device.
- Slide the cover off.
- Insert 6 new AAA alkaline batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover.
3.2. Installing Label Tape
- Ensure the device is turned off.
- Open the tape cassette cover located on the top left side of the device.
- Insert the label tape cassette firmly into the compartment, ensuring the tape end feeds through the tape guide.
- Close the tape cassette cover until it clicks into place.
- Press the Power button to turn on the device.
4. Operating Instructions
4.1. Basic Label Creation
- Turn on the device by pressing the Power button.
- Type your desired text using the QWERTZ keyboard. The text will appear on the LCD display.
- To print, press the Print button (often indicated by a printer icon).
- After printing, use the built-in cutter on the top right of the device to cut the label.
4.2. Text Formatting
The P-Touch H110 offers various formatting options. Use the Menu button to access these settings.
- Font Size: Press Menu, navigate to "Size", and select your preferred font size (e.g., AAA, AA, A).
- Font Style: Press Menu, navigate to "Style", and choose options like Bold, Italic, Outline, Shadow, etc.
- Frames: Press Menu, navigate to "Frame", and select a decorative frame for your label.
- Symbols: Press the Symbol button (often indicated by a symbol icon) to insert various symbols.
4.3. Saving and Recalling Labels
The device can store frequently used label designs.
- To Save: After creating a label, press Menu, navigate to "Save", and select a memory slot.
- To Recall: Press Menu, navigate to "Recall", and select the desired memory slot.
5. Maintenance
5.1. Cleaning the Print Head
Regular cleaning of the print head ensures optimal print quality.
- Turn off the device and remove the tape cassette.
- Gently wipe the print head with a dry cotton swab. Do not touch the print head with your bare hands.
- Allow to dry completely before reinserting the tape cassette.
5.2. Cleaning the Cutter Blade
If the cutter blade becomes dull or sticky, clean it carefully.
- Turn off the device and remove the tape cassette.
- Using a cotton swab moistened with isopropyl alcohol, gently clean any adhesive residue from the cutter blade.
- Allow to dry completely before reinserting the tape cassette.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Solution |
|---|---|
| Device does not turn on. | Check if batteries are inserted correctly with correct polarity. Replace with new AAA alkaline batteries. Ensure the battery compartment cover is securely closed. |
| Poor print quality or blank labels. | Clean the print head as described in Section 5.1. Ensure the tape cassette is installed correctly. Replace the tape cassette if it is old or damaged. |
| Tape does not feed or jams. | Ensure the tape cassette is inserted correctly and fully seated. Check for any obstructions in the tape path. Clean the cutter blade if it is sticky. |
| Cutter does not cut cleanly. | Clean the cutter blade as described in Section 5.2. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | Brother P-Touch H110 (PTH110) |
| Print Resolution | 180 dpi |
| Keyboard Layout | QWERTZ |
| Power Supply | 6 x AAA alkaline batteries (or optional AC adapter) |
| Compatible Tape Widths | Various TZe tape widths (e.g., 3.5mm, 6mm, 9mm, 12mm) |
| Dimensions (approx.) | 7.6"D x 11.22"W x 4.06"H |
| Weight (without batteries/tape) | Approximately 14.1 ounces (0.4 kg) |
8. Warranty and Support
8.1. Warranty Information
The Brother P-Touch H110 Label Maker comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, or visit the official Brother website for detailed warranty information.
8.2. Customer Support
For technical assistance, troubleshooting, or to purchase accessories and supplies, please visit the official Brother support website or contact their customer service department. Contact details can typically be found on the Brother website or in the packaging materials.
You can find more information and support resources on the Brother Support Website.
