Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Saturn II 630W 6 LED Light Large Pendant, model E22664-11MS. This contemporary lighting fixture features a matte silver finish with elegant acrylic diffusers and integrated dimmable LED technology. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Figure 1: ET2 Saturn II 6 LED Light Large Pendant, main view.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in electric shock or fire.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Do not connect this fixture to an ungrounded electrical system.
- Do not attempt to alter the fixture in any way.
- Handle the fixture with care to prevent damage to the LED components.
Package Contents
Verify that all components are present before beginning installation:
- ET2 Saturn II 6 LED Light Large Pendant Fixture
- Mounting Hardware Kit (includes mounting bracket, screws, wire nuts)
- Instruction Manual
Figure 2: Side view of the pendant light, showcasing the layered ring design.
Setup and Installation
Professional installation by a qualified electrician is recommended for this product.
- Turn Off Power: Locate the circuit breaker or fuse box and turn off the power to the junction box where the fixture will be installed.
- Prepare Mounting: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is firmly attached and can support the weight of the fixture.
- Wiring Connections: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
- Attach Fixture: Carefully lift the fixture and attach it to the mounting bracket, securing it with the canopy screws. Ensure all wires are tucked neatly into the junction box.
- Adjust Height (if applicable): If the pendant height is adjustable, carefully adjust the suspension cables to the desired length before fully securing the canopy.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Figure 3: Angled view of the pendant light, highlighting the matte silver finish and acrylic diffusers.
Operating Instructions
The ET2 Saturn II pendant light is designed for ease of use.
- Power On/Off: Operate the light using a standard wall switch connected to the fixture's circuit.
- Dimming Functionality: This fixture features dimmable LED technology. To utilize the dimming function, ensure it is connected to a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.
- App Control: The product specifications indicate "App" as a control method. Refer to the manufacturer's website or included documentation for specific instructions on connecting and controlling the fixture via a smart device application, if applicable.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your pendant light.
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or acrylic diffusers.
- LED Components: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the LED modules.
- Inspection: Periodically inspect the fixture for any signs of wear or damage. If any issues are observed, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your pendant light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture Loose wiring connection Faulty switch | Check circuit breaker/fuse. Verify all wire connections are secure (with power off). Test the wall switch. |
| Light flickers or dims improperly | Incompatible dimmer switch Loose wiring connection | Ensure a compatible LED dimmer is used. Verify all wire connections are secure (with power off). |
| Humming or buzzing sound | Incompatible dimmer switch | Replace with a high-quality, compatible LED dimmer switch. |
If the problem persists after performing these steps, contact a qualified electrician or ET2 customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | ET2 |
| Model Name | E22664-11MS |
| Color | Matte Silver |
| Material | Acrylic, Aluminum |
| Style | Contemporary, Modern |
| Light Fixture Form | Ceiling Pendant |
| Product Dimensions | 30"L x 30"W x 0.5"H |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Semi Flush Mount |
| Control Method | App (refer to manufacturer for details) |
| Light Source Type | LED |
| Finish Type | Matte |
| Shade Material | Glass |
| Number of Light Sources | 6 |
| Voltage | 120 Volts |
| Light Color | 3000K |
| Shape | Round |
| Item Weight | 42.4 pounds |
| Wattage | 105 watts |
| Brightness | 7350 Lumen |
| Efficiency | 70 lumens/watt |
| UPC | 845094080763 |
Product Overview
The ET2 Saturn II pendant light features multiple rings of matte silver that support horizontal acrylic diffusers. These diffusers glow when illuminated by the integrated dimmable LED light source, creating a unique and modern aesthetic. The fixture is designed for indoor use and offers versatile installation options.
Figure 4: Close-up view of the Saturn II pendant light's illuminated rings.
Figure 5: Another angled perspective of the Saturn II pendant light, highlighting its contemporary design.
Official Product Video
Video 1: A showroom overview of various ET2 lighting fixtures, including the Saturn II pendant light (visible around 1:14 mark), demonstrating their design and illumination. This video is provided by the seller.
Warranty and Support
Your ET2 Saturn II 6 LED Light Large Pendant comes with a 1-year manufacturer's limited warranty. Additionally, the product is backed by a 5-year warranty as stated in the product features, ensuring peace of mind with your purchase.
For technical assistance, warranty claims, or further inquiries, please refer to the contact information provided on the product packaging or visit the official ET2 website.
