GEORGE KOVACS P4324-647 George's Reading Room LED Floor Lamp User Manual

1. Introduction and Overview

Thank you for choosing the GEORGE KOVACS P4324-647 George's Reading Room LED Floor Lamp. This modern and energy-efficient floor lamp is designed to provide optimal lighting for reading and various tasks. Featuring an integrated LED module, a dimmable light source, and a sleek Copper Bronze Patina finish, this lamp combines functionality with contemporary design. Please read this manual thoroughly before installation and operation to ensure safe and proper use.

Image 1.1: The GEORGE KOVACS P4324-647 George's Reading Room LED Floor Lamp, showcasing its slender design and square LED head in a copper bronze patina finish.

2. Safety Information

WARNING: Risk of Electric Shock. Disconnect power before installation or servicing.

• This product is ETL Certified for Indoor Locations only. Do not use outdoors or in wet environments.
• Ensure the power supply is disconnected before assembling, installing, or performing any maintenance on the lamp.
• Do not modify the lamp or its components. Any modifications may void the warranty and create safety hazards.
• Keep the lamp away from flammable materials.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
• Use only with a 120-volt, 60 Hz power supply.

3. Package Contents

Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are sure all parts are present and in good condition. The package should contain:

• GEORGE KOVACS P4324-647 Floor Lamp Assembly (Base, Pole, Lamp Head)
• Integrated LED Module (pre-installed)
• Mounting Hardware (for assembly)
• Instruction Manual

Note: A junction box is not included and is not required for standard floor lamp operation, as this lamp plugs into a wall outlet.

4. Setup and Installation

Follow these steps to assemble your floor lamp:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and soft surface to prevent scratches.
2. Assemble the Pole: Most floor lamps come with a multi-section pole. Gently thread the pole sections together, ensuring they are securely tightened. Do not overtighten.
3. Attach Pole to Base: Carefully thread the assembled pole onto the lamp base. Ensure the power cord passes freely through the base. Tighten securely by hand.
4. Attach Lamp Head: Connect the lamp head to the top of the pole. Ensure any electrical connectors are properly seated before securing the head.
5. Position the Lamp: Place the assembled lamp in your desired indoor location, ensuring it is on a stable, level surface.
6. Connect to Power: Plug the lamp's power cord into a standard 120V AC wall outlet.

If the lamp appears wobbly after assembly, re-check all threaded connections, especially where the pole meets the base, to ensure they are fully tightened.

5. Operating Instructions

Your GEORGE KOVACS P4324-647 Floor Lamp features an integrated LED light source with dimming capabilities.

• Power On/Off: The lamp is equipped with a toggle or touch-sensitive switch. Locate the switch on the lamp pole or head. Press or toggle the switch to turn the lamp on or off.
• Dimming Function: To adjust the brightness, press and hold the touch-sensitive switch, or cycle through brightness levels if it's a toggle switch with multiple settings. The lamp offers dimmable light (3000K color temperature, 442 Lumens at full brightness).
• Optimal Use: This lamp is specifically designed as a reading lamp, providing focused illumination. Adjust the lamp head as needed for optimal light direction.

6. Maintenance

To ensure the longevity and performance of your lamp, follow these simple maintenance guidelines:

• Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LED Module: The lamp uses an integrated LED module, which is designed for long-term use and is not user-replaceable. Do not attempt to replace the LED module.
• Cord Care: Regularly inspect the power cord for any signs of damage, fraying, or cuts. If damage is found, discontinue use immediately and contact a qualified electrician or the manufacturer for assistance.

7. Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact GEORGE KOVACS customer support.

8. Specifications

9. Warranty and Support

This GEORGE KOVACS P4324-647 George's Reading Room LED Floor Lamp comes with a One Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact GEORGE KOVACS customer service. Please have your model number (P4324-647) and proof of purchase ready when contacting support.

Contact information for GEORGE KOVACS can typically be found on their official website or on the product packaging.