GOLMAR 19950114

Golmar EL500/EL505 Cable and Visor Frame User Manual

Brand: GOLMAR | Model: 19950114

1. Introduction

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Golmar EL500/EL505 Cable and Visor Frame. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Safety Information

Always adhere to the following safety precautions:

3. Package Contents

Verify that all items are present in the package:

Golmar EL500/EL505 Visor Frame

Figure 1: The Golmar EL500/EL505 Visor Frame, showing its metallic finish and mounting holes.

4. Setup and Installation

Follow these steps for proper installation of the visor frame:

  1. Prepare the Mounting Surface: Ensure the surface is clean, dry, and flat. Mark the desired mounting location.
  2. Align the Frame: Place the Golmar visor frame against the marked surface, ensuring it is level.
  3. Mark Drilling Points: Use a pencil to mark the positions of the mounting holes through the frame.
  4. Drill Pilot Holes: Carefully drill pilot holes at the marked points. Use a drill bit appropriate for the mounting surface and screw size.
  5. Secure the Frame: Align the frame with the drilled holes and secure it using the provided mounting screws. Do not overtighten.
  6. Insert Components: Once the frame is securely mounted, insert the compatible Golmar EL500/EL505 cable and other components into the frame's opening as per their respective instructions.

5. Operating Instructions

The Golmar EL500/EL505 Visor Frame serves as a housing and aesthetic cover for compatible Golmar intercom or access control components. Its operation is passive, providing structural support and protection for the embedded devices.

6. Maintenance and Care

To ensure the longevity and appearance of your Golmar Visor Frame, follow these maintenance guidelines:

7. Troubleshooting

This section addresses common issues related to the Golmar Visor Frame. For issues related to the devices installed within the frame, refer to their respective manuals.

ProblemPossible CauseSolution
Frame is loose on the wall.Mounting screws are loose or wall anchors are insufficient.Tighten mounting screws. If screws do not hold, use appropriate wall anchors for your wall type.
Components do not fit into the frame.Incompatible components or incorrect orientation.Ensure you are using Golmar EL500/EL505 compatible components. Check the orientation of the component before attempting to insert it.
Scratches or damage on the frame.Physical impact or abrasive cleaning.Minor scratches may be polished with appropriate metal polish (if applicable to material). For significant damage, replacement is recommended.

8. Specifications

Technical specifications for the Golmar EL500/EL505 Visor Frame:

FeatureDetail
ManufacturerGolmar
Model Number19950114
Item Weight500 grams
Quantity of Items1
ASINB01MY7YW7D
Date First Available on Amazon.com.beSeptember 23, 2022

9. Warranty and Support

For warranty information and technical support, please contact Golmar customer service or refer to the official Golmar website. Keep your purchase receipt as proof of purchase.

Golmar Official Website: www.golmar.es (Example link, actual link may vary)

Related Documents - 19950114

Preview Golmar G2+ Kit Soul Art 7 Lite Monitor User Manual
Comprehensive user manual for the Golmar G2+ Kit Soul Art 7 Lite monitor, covering installation, system operation, wiring diagrams, and special codes for video door entry systems.
Preview Golmar TUYA App Quick Guide - Configuration
A concise guide for configuring the Golmar TUYA app, covering installation, user registration, device sharing, and adding various identification methods like cards, PINs, and fingerprints for access control.
Preview Golmar Tekna HF Plus Quick Manual - Installation, Programming, and Operation Guide
Quick guide for the Golmar Tekna HF Plus monitor, covering installation, programming modes (Master, Slave, Intercom), button functions, and operation for video door entry systems.
Preview Golmar CE-ART 7W/G2+ Wi-Fi Concierge Central - User Manual
Comprehensive user manual for the Golmar CE-ART 7W/G2+ Wi-Fi enabled Concierge Central system. Covers installation, configuration, features, operation, intercom functions, recording capabilities, and troubleshooting for 2-wire systems.
Preview Golmar ART 1/G+ Handsfree Audio Unit User Manual
User manual for the Golmar ART 1/G+ handsfree audio unit, detailing device description, operation for incoming calls, making calls, and idle mode functions, including ringtone settings and intercom features.
Preview Golmar Tekna-S Plus Monitor User Manual
Comprehensive user manual for the Golmar Tekna-S Plus monitor, detailing installation, operation, programming, and advanced features for video door entry systems. Includes wiring diagrams and technical specifications.