Introduction
The SOLEM BL-IP is a state-of-the-art Bluetooth battery-powered irrigation programmer designed for efficient and convenient garden watering. This waterproof (IP68 rated) module can be installed directly into your garden's valve box, offering a discreet and durable solution. Available in 2, 4, and 6-way versions, it allows for remote programming via an iOS or Android smartphone or tablet using the My Solem App, providing a flexible and wireless irrigation system for managing multiple zones in your garden.
Safety Information
- Always read and understand all instructions before operating the device.
- Ensure the battery compartment is securely sealed after battery installation to maintain IP68 waterproofing.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for service.
- Keep out of reach of children.
- Use only the specified 9V battery type.
Product Overview
An image of the SOLEM BL-IP Bluetooth irrigation programmer, showing its compact, off-white casing, a battery compartment on the side, and multiple colored wires extending from the bottom for valve connections. The device is designed for outdoor use and is ready for installation.
The SOLEM BL-IP unit consists of a durable, waterproof housing designed to withstand outdoor conditions. It features a battery compartment for a 9V battery and color-coded wires for connecting to irrigation valves. The integrated Bluetooth module allows for wireless communication with your smart device.
Setup
1. Battery Installation
- Locate the battery compartment on the side of the BL-IP unit.
- Unscrew the cap and insert a new 9V alkaline battery, ensuring correct polarity.
- Securely re-screw the cap to maintain the IP68 waterproof seal.
2. Wiring to Valves
Connect the colored wires from the BL-IP unit to your irrigation valves. Each colored wire corresponds to a specific station (valve), and there will be a common wire. Refer to your irrigation system's valve wiring diagram for specific connections. Ensure all connections are secure and waterproof.
3. Physical Installation
Due to its IP68 rating, the SOLEM BL-IP can be installed directly inside a standard irrigation valve box in your garden. Ensure it is placed in a location where it is protected from direct mechanical damage and extreme temperatures.
4. App Download and Connection
- Download the "My Solem App" from the Apple App Store (for iOS) or Google Play Store (for Android).
- Open the app and follow the on-screen instructions to connect to your BL-IP unit via Bluetooth. Ensure Bluetooth is enabled on your smartphone or tablet.
- The app will guide you through the initial setup and device pairing process.
Operating
1. Programming Irrigation Schedules
Once connected to the My Solem App, you can create and manage irrigation programs for each connected station. The app provides an intuitive interface for setting start times, durations, and watering days.
- Navigate to the "Programs" section within the app.
- Select the desired station(s) to program.
- Set the watering start time, duration (in minutes), and frequency (e.g., specific days of the week, cyclic).
- Save your program. The BL-IP unit will store the program and operate automatically.
2. Manual Operation
The My Solem App also allows for manual operation of individual stations for testing or immediate watering needs.
- From the app's main screen, select the station you wish to operate manually.
- Choose the desired watering duration.
- Confirm to start manual watering.
3. Managing Multiple Modules
If you have multiple SOLEM BL-IP modules in your garden, the My Solem App allows you to manage all of them from a single interface. You can switch between modules to program and monitor each one independently.
Maintenance
1. Battery Replacement
The BL-IP unit is powered by a 9V battery. The My Solem App will indicate low battery status. Replace the battery as soon as the low battery warning appears to ensure continuous operation. Follow the battery installation steps outlined in the Setup section.
2. Cleaning
Periodically inspect the unit for dirt or debris, especially if installed in a valve box. Clean the exterior with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
3. Winterization (for cold climates)
In regions with freezing temperatures, it is recommended to remove the BL-IP unit from the valve box and store it indoors during winter months to prevent potential damage from ice expansion. Disconnect the wires and remove the battery before storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cannot connect to BL-IP via Bluetooth. | Bluetooth is off on smartphone/tablet; BL-IP battery is low or dead; device is out of range. | Ensure Bluetooth is enabled. Replace 9V battery. Move closer to the BL-IP unit. |
| Irrigation program not starting. | Incorrect program settings; low battery; valve issue; wiring problem. | Verify program settings in the app. Replace battery. Check valve operation manually. Inspect wiring connections. |
| Watering duration is incorrect. | Program duration set incorrectly in the app. | Adjust the watering duration in the My Solem App for the specific program/station. |
Specifications
- Model Number: 700205
- Brand: SOLEM
- Product Dimensions: 15 x 12 x 4 cm (5.9 x 4.7 x 1.6 inches)
- Weight: 360 grams (0.79 lbs)
- Material: Plastic
- Power Supply: 9V Battery
- Protection Rating: IP68 (Waterproof)
- Connectivity: Bluetooth
- Number of Stations: Available in 2, 4, and 6-way versions (This specific model is 4-station)
- Programming: Via My Solem App (iOS/Android)
Warranty and Support
SOLEM products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official SOLEM website. For technical support, troubleshooting assistance, or spare parts, please contact SOLEM customer service through their official channels. Always provide your model number (700205) when seeking support.
For the most up-to-date information and support resources, please visit the SOLEM Official Website.