Introduction
This user manual provides comprehensive instructions for the safe and effective operation, setup, and maintenance of your DJI Inspire 2 Drone. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage or injury. Retain this manual for future reference.
Product Overview
The DJI Inspire 2 is an advanced filmmaking drone designed for professional aerial cinematography. It features an integrated HD video transmission system, a 360-degree rotating gimbal, and compatibility with 4K and 5.2K cameras. Its robust design and intelligent flight systems enhance performance and safety.
Key Features
- Efficient workflow for professional aerial operations.
- Advanced sense and avoid obstacle detection system.
- Spotlight Pro intelligent flight mode for complex shots.
- Compatible with 5.2K Gimbal Cameras (e.g., Zenmuse X5S).
- Multiple intelligent flight modes for enhanced control.
- Smart Return to Home function for increased safety.
- Operating Temperature: -4° to 104° F (-20° to 40° C).
What's in the Box
- 16 GB MicroSD card
- 2 x Intelligent Flight Battery (TB50)
- 3 Gimbal Dampers
- 4 Battery Insulation Stickers
- Battery Charger
- Carrying Case
- Charging Hub
- Power Cable
- Propeller Mounting Plates
- Remote Controller
- USB Cable (with double A ports)
- Vision System Calibration Plate
Product Components
Setup
- Unpacking: Carefully remove all components from the carrying case. Verify that all items listed in "What's in the Box" are present.
- Battery Charging: Insert the Intelligent Flight Batteries (TB50) into the Charging Hub. Connect the Charging Hub to the Power Cable and a power outlet. Allow batteries to fully charge before first use.
- Propeller Installation: Attach the propellers to the motor mounts. Ensure correct propeller types (clockwise and counter-clockwise) are matched to their respective motors. Refer to the markings on the propellers and motors.
- Gimbal and Camera Attachment: Securely attach your compatible gimbal and camera system (e.g., Zenmuse X5S) to the drone's mounting interface. Ensure the gimbal dampers are correctly installed.
- Remote Controller Preparation: Charge the remote controller. Power it on and ensure it is linked with the aircraft. Refer to the remote controller's specific manual for detailed linking instructions.
- App Installation: Download and install the DJI GO 4 app on your mobile device. Connect your mobile device to the remote controller via the USB cable.
- Firmware Update: Before first flight, ensure all firmware (aircraft, remote controller, batteries, gimbal) is updated to the latest version via the DJI GO 4 app.
Operating Instructions
Pre-Flight Checklist
- Ensure batteries are fully charged for both aircraft and remote controller.
- Check propellers for any damage and ensure they are securely attached.
- Verify gimbal and camera are properly mounted and locked.
- Confirm sufficient GPS signal and clear flight path.
- Check for any warnings or errors in the DJI GO 4 app.
Basic Flight Operations
- Power On: Power on the remote controller first, then the aircraft.
- Takeoff: In the DJI GO 4 app, tap the auto-takeoff icon or manually initiate takeoff by pushing both control sticks down and inwards, then slowly pushing the left stick up.
- Flight Control: Use the control sticks on the remote controller to maneuver the drone. The left stick typically controls altitude and yaw, while the right stick controls forward/backward and left/right movement.
- Landing: Tap the auto-landing icon in the app or manually land by slowly pulling the left stick down. Ensure the landing area is clear.
- Intelligent Flight Modes: Explore various intelligent flight modes such as Spotlight Pro, TapFly, ActiveTrack, and Waypoints through the DJI GO 4 app for advanced flight capabilities.
Obstacle Avoidance
The Inspire 2 features forward, downward, and upward vision systems for obstacle detection. These sensors help the drone avoid obstacles during flight and in intelligent flight modes. Always maintain visual line of sight and be prepared to take manual control, as obstacle avoidance systems have limitations.
Maintenance
- Cleaning: Regularly clean the drone's body, motors, and vision sensors with a soft, dry cloth. Avoid using liquids or solvents.
- Propeller Inspection: Before each flight, inspect propellers for cracks, bends, or other damage. Replace damaged propellers immediately.
- Battery Care: Store batteries at approximately 50-60% charge if not used for extended periods. Avoid overcharging or fully discharging batteries. Operate within specified temperature ranges.
- Gimbal Maintenance: Ensure the gimbal is free from dust and debris. Handle the camera and gimbal gently to prevent damage.
- Firmware: Keep all drone components updated with the latest firmware to ensure optimal performance and access to new features.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Drone does not power on. | Battery not charged or improperly inserted. | Ensure batteries are fully charged and correctly inserted. Press power button sequence correctly (press once, then press and hold). |
| Gimbal not working or unstable. | Gimbal lock engaged, firmware issue, or physical damage. | Remove gimbal lock before powering on. Update firmware. Check for physical obstructions or damage. If issue persists, contact support. |
| Remote controller disconnects. | Interference, low battery, or out of range. | Fly in an open area away from strong interference. Ensure remote controller battery is charged. Maintain line of sight and stay within operational range. |
| Poor image/video quality from FPV camera. | FPV camera limitations. | The FPV camera is primarily for piloting. For high-quality footage, use the main gimbal camera (e.g., Zenmuse X5S). |
| Propeller mounts have play. | Manufacturing tolerance or wear. | Ensure propellers are tightened correctly. If excessive play affects flight stability, contact DJI support for inspection. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DJI |
| Model Name | Inspire 2 |
| Item Model Number | CP.BX.000166 |
| Connectivity Technology | Wi-Fi, Bluetooth |
| Control Type | App Control |
| Video Capture Resolution | 4K (up to 5.2K with compatible camera) |
| Effective Still Resolution | 4 Megapixels (with X4S camera) |
| Supported Image Format | DNG |
| Video Capture Format | MP4 |
| Optical Sensor Technology | CMOS |
| Item Weight | 16 Pounds (approx. 7.26 kg) |
| Product Dimensions | 18"L x 12"W x 21"H (approx. 45.7cm L x 30.5cm W x 53.3cm H) |
| Material | Carbon Fiber |
| Battery Cell Composition | Lithium Ion (Intelligent Flight Battery TB50) |
| Operating Temperature | -4° to 104° F (-20° to 40° C) |
| Obstacle Sensing Range | 0-16.4 feet (0-5 m) |
| Skill Level | Professional |
Warranty and Legal Information
Limitation of Liability
When receiving service, DJI is responsible for loss or damage to your product only while it is in DJI's possession or in transit, if DJI is responsible for transportation. DJI is NOT responsible for loss or disclosure of any data, including confidential information, proprietary information, or personal information, contained in a product.
Under no circumstances, and notwithstanding the failure of essential purpose of any remedy set forth herein, shall DJI, its affiliates, suppliers, resellers, or service providers be liable for any of the following even if informed of their possibility and regardless of whether the claim is based in contract, warranty, negligence, strict liability or other theory of liability:
- Third-party claims against you for damages.
- Loss, damage, or disclosure of your data.
- Special, incidental, punitive, indirect, or consequential damages, including but not limited to lost profits, business revenue, goodwill, or anticipated savings.
In no case shall the total liability of DJI, its affiliates, suppliers, resellers, or service providers for damages from any cause exceed the amount of actual direct damages, not to exceed the amount paid for the product. The foregoing limitation does not apply to damages for bodily injury (including death), damage to real property, or damage to tangible personal property for which DJI is liable under law. As some states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, the above limitation or exclusion may not apply to you.
Support
For further assistance, detailed tutorials, or to access the latest firmware updates, please visit the official DJI support website. You can also find contact information for customer service and technical support there.
Official DJI Store: Visit the DJI Store on Amazon
