Intex Frozen Inflatable Beach Ball 58021 User Manual

Product Overview

This manual provides instructions for the Intex Frozen Inflatable Beach Ball, model 58021. Designed for recreational use, this multi-colored beach ball features popular Frozen characters and is suitable for various outdoor activities in water or on land.

Image: Packaging for the Intex Frozen Inflatable Beach Ball, model 58021, showing the product with Frozen characters and the Intex brand logo. The packaging indicates a size of approximately 51 cm (20 inches).

Safety Information

• WARNING: Not suitable for children under 36 months due to potential small parts.
• CAUTION: Use only under direct adult supervision. This product is not a life-saving device.
• Keep the beach ball away from sharp objects, open flames, and excessive heat sources.
• Do not over-inflate the ball, as this may cause damage or rupture.
• Ensure the play area is clear of hazards before use.

Setup Instructions

Inflation

1. Locate the inflation valve on the beach ball.
2. Open the valve cap.
3. Use a hand pump or mouth to inflate the ball. Inflate until the ball is firm to the touch but still has some give. Avoid over-inflation.
4. Once inflated, securely close the valve cap to prevent air leakage.

Note: An inflation pump is not included with this product.

Operating Instructions

The Intex Frozen Inflatable Beach Ball is designed for recreational play. Follow these guidelines for safe and enjoyable use:

• Use the ball for tossing, catching, and light games in appropriate environments.
• Ideal for use in swimming pools, at the beach, or in open outdoor spaces like a backyard.
• Always ensure there is adequate space around players to prevent accidental collisions or injuries.

Maintenance

Cleaning

Clean the beach ball with mild soap and water. Rinse thoroughly with clean water and allow it to air dry completely before storage to prevent mildew.

Storage

For long-term storage, deflate the ball completely. Fold it neatly and store it in a cool, dry place, away from direct sunlight, extreme temperatures, and sharp objects.

Repair

In the event of a small puncture, a standard PVC repair patch kit (not included) can be used. Follow the specific instructions provided with your chosen repair kit for best results.

Troubleshooting

Ball does not hold air:

• Check the inflation valve to ensure it is fully closed and sealed.
• Inspect the entire surface of the ball for any visible punctures or small leaks. A common method is to submerge the inflated ball in water and look for air bubbles.
• Ensure the ball was not over-inflated, which can stress seams and lead to slow leaks.

Specifications

Warranty and Support

For warranty information or product support, please contact Intex customer service directly. Refer to the product packaging for specific contact details or visit the official Intex website for assistance.