Introduction
This manual provides detailed instructions for the APEKX Clip Bluetooth Audio Adapter, designed to convert your wired headphones, headsets, and speakers into wireless devices. It features Bluetooth 5.1 + EDR technology for efficient transmission and low power consumption, enabling hands-free calls and music enjoyment. This compact and portable device offers freedom from tangled wires, making it ideal for various activities.
What's in the Box
- APEKX Clip Bluetooth Audio Adapter
- Micro USB Cable
- 3.5mm Stereo Audio Cable
Product Features
- Converts wired earphones, headphones, and speakers into wireless devices.
- Features Bluetooth 5.1 + EDR technology for full-speed transmission and low power consumption.
- Provides a hands-free solution for seamless call handling and music enjoyment.
- Equipped with oversized buttons for intuitive control of playback, track selection, and volume adjustment.
- Compatible with iPhone, iPad, iPod, Android smartphones/tablets, and other wireless-enabled devices.
Product Overview
Familiarize yourself with the components and controls of your APEKX Clip Bluetooth Audio Adapter.
This image displays the APEKX Clip Bluetooth Audio Adapter with labels pointing to its various components: Volume + Button, Multi-function Button, Next Button, LED indicators, Noise-Canceling Microphone, 3.5mm Headphone jack, Charging Port, and Previous Button.
Setup
Charging the Device
Before first use, fully charge the adapter. Connect the supplied Micro USB cable to the charging port on the adapter and the other end to a USB power source. The LED indicator will show charging status. A full charge typically takes 1-1.5 hours.
An image illustrating the quick charge capability of the APEKX Bluetooth adapter, indicating a 1-1.5 hour quick charge time and 7 hours of continuous use.
Pairing with a Bluetooth Device
Follow these steps to pair your APEKX Clip Bluetooth Audio Adapter with your smartphone, tablet, or other Bluetooth-enabled device:
- Power On: Long press the Multi-function Button until the LED indicator flashes blue and red, indicating it's in pairing mode.
- Activate Bluetooth: On your device (e.g., smartphone), go to Bluetooth settings and turn Bluetooth on.
- Select Device: Look for "APEKX" or "APEKX BR01" in the list of available devices and select it to connect.
- Confirmation: Once successfully paired, the LED indicator will flash blue slowly, and you may hear an audible confirmation.
A visual guide demonstrating the three steps for connecting the APEKX Bluetooth adapter: 1. Long press to power on, 2. Pair with your device via Bluetooth settings, and 3. Begin playing audio.
Operating Instructions
Music Playback
Once paired, connect your wired headphones or speakers to the 3.5mm headphone jack on the adapter.
- Play/Pause: Press the Multi-function Button once.
- Next Track: Press the Next Button (right arrow) once.
- Previous Track: Press the Previous Button (left arrow) once.
- Volume Up: Press the Volume + Button.
- Volume Down: Press the Volume - Button.
Call Management
The built-in microphone allows for hands-free calling.
- Answer/End Call: Press the Multi-function Button once during an incoming call or to end an active call.
- Reject Call: Long press the Multi-function Button during an incoming call.
- Redial Last Number: Double-press the Multi-function Button when not on a call.
Maintenance
To ensure the longevity and optimal performance of your APEKX Clip Bluetooth Audio Adapter, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Moisture Protection: Do not expose the device to excessive heat or moisture. Avoid using it in rain or near water.
- Battery Care: Keep the battery away from metal objects to prevent short-circuiting. Do not dispose of the battery in fire.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device fully using the provided Micro USB cable. |
| Cannot pair with Bluetooth device. | Device not in pairing mode; Bluetooth off on source device; too far from source. | Ensure the adapter is in pairing mode (flashing blue/red). Turn on Bluetooth on your source device. Move the adapter closer to the source device (within 37 feet/12 meters). |
| No sound or poor audio quality. | Headphones/speakers not properly connected; volume too low; interference. | Ensure 3.5mm cable is securely connected. Increase volume on both the adapter and the source device. Avoid placing the device near other wireless devices to prevent interference. |
| Disconnections during use. | Out of range; low battery. | Stay within the effective Bluetooth range (up to 37 feet/12 meters). Recharge the adapter if the battery is low. |
Specifications
- Model Number: BR01
- Product Dimensions: 2 x 1 x 1 inches
- Item Weight: 0.6 ounces
- Connectivity Technology: Wireless (Bluetooth 5.1 + EDR)
- Power Source: Battery Powered (1 Lithium Polymer battery required)
- Material: Plastic
- Manufacturer: APEKX
- Special Feature: Microphone Included
- First Available Date: February 7, 2017
This image illustrates the compact dimensions of the APEKX Clip Bluetooth Audio Adapter, measuring approximately 1.77 inches in length and 1.26 inches in width.
Safety Information
Please read and adhere to the following safety guidelines to prevent damage to the device or personal injury:
- Do not expose the device to excessive heat or moisture.
- Keep the battery away from metal objects.
- Do not dispose of the battery in a fire.
- Avoid placing the device near other wireless devices to prevent interference.
Warranty and Support
For warranty information or technical support, please contact APEKX customer service. Refer to the product packaging or the official APEKX website for contact details and the most up-to-date support information.
