1. Introduction
The Ledlenser H3.2 Headlamp is a versatile and lightweight lighting solution designed for various activities. It features the patented Advanced Focus System, allowing seamless transition between a broad flood beam and a sharply focused long-distance beam. The lamp head can swivel 75 degrees for optimal illumination. This manual provides essential information for the safe and effective use of your H3.2 Headlamp.
Package Contents
- Ledlenser H3.2 Headlamp
- 3x AAA Alkaline Batteries (included)
- User Manual
2. Safety Information
- Do not look directly into the LED light.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the headlamp.
- Use only specified battery types (AAA alkaline).
- Remove batteries if the headlamp will not be used for an extended period.
- Dispose of batteries according to local regulations.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the rear of the headband.
Image: Rear view of the Ledlenser H3.2 headlamp, highlighting the battery compartment.
- Open the battery compartment cover.
- Insert three (3) AAA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
3.2 Adjusting the Headband
The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit. The headband is designed for optimum weight distribution.
Image: The Ledlenser H3.2 headlamp showing the adjustable elastic headband.
4. Operating Instructions
4.1 Power On/Off
To turn the headlamp on or off, press the power button located on the lamp head.
4.2 Brightness Adjustment (Dimmable)
The H3.2 features infinite dimming. Rotate the switch located on the battery box at the rear of the headband to adjust the brightness from minimum to maximum (up to 120 lumens).
Image: Close-up of the Ledlenser H3.2 headlamp's battery pack, indicating the dimmable switch.
4.3 Focusing the Beam (Advanced Focus System)
The patented Advanced Focus System allows you to seamlessly transition between a broad flood beam for close-range illumination and a sharply focused long-distance beam. To adjust the focus, slide the lamp head forward or backward.
4.4 Adjusting Lamp Head Angle
The lamp head can be swiveled up to 75 degrees to direct the light precisely where needed. Gently tilt the lamp head to your desired angle.
5. Maintenance
5.1 Cleaning
Wipe the headlamp with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is dry before closing.
5.2 Battery Replacement
Replace all three AAA batteries simultaneously when the light output diminishes. Refer to section 3.1 for battery installation instructions. Always use fresh, high-quality alkaline batteries.
5.3 Storage
Store the headlamp in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage and damage to the device.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlamp does not turn on. | Dead or incorrectly inserted batteries. | Replace batteries or check polarity. |
| Light is dim. | Low battery power. | Replace batteries. |
| Beam does not focus properly. | Dust or debris on the lens. | Clean the lens gently with a soft cloth. |
7. Specifications
- Model: H3.2
- Light Source: LED
- Luminosity: Up to 120 lumens
- Beam Distance: Up to 100 meters (328 ft)
- Battery Type: 3x AAA Alkaline (included)
- Battery Duration: Up to 60 hours (on Eco mode with 5 lm)
- Weight (incl. batteries): 133 g (4.7 oz)
- Water Resistance: IPX4 (Splash-proof)
- Lamp Head Diameter: 2.8 cm (1.1 in)
- Swivel Head Angle: 75 degrees
- Material: Plastic
- Color: Black
- Product Dimensions: 10.24"D x 10.24"W x 1.18"H
8. Warranty and Support
For warranty information, product registration, or technical support, please visit the official Ledlenser website or contact their customer service department. Retain your proof of purchase for warranty claims.
Ledlenser Official Website: www.ledlenser.com
