Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your myTouchSmart 35167 Wireless Outdoor/Indoor Dual Outlet Digital Timer. This device allows you to schedule the power for indoor and outdoor lights, lamps, small appliances, and seasonal lighting using a wireless remote control. Please read these instructions carefully before use to ensure proper functionality and safety.
Safety Information
- Electrical Ratings: Ensure that the connected devices do not exceed the timer's maximum load: 125V AC, 60 Hz, 15A Resistive, 1250W Tungsten, 1/2 HP.
- Outdoor Use: The plug-in receiver is weather-resistant. However, ensure it is installed in a location that minimizes direct exposure to heavy rain or standing water.
- Grounding: The receiver features two (2) grounded outlets. Always connect to a properly grounded 3-prong outlet.
- Disconnection: To reduce the risk of electric shock, do not open the unit. There are no user-serviceable parts inside.
- Children: Keep out of reach of children.
Package Contents
- 1 x myTouchSmart Wireless Remote Control
- 1 x myTouchSmart Dual Outlet Plug-in Receiver
- 3 x AAA Batteries (for remote control)
Product Overview
The myTouchSmart 35167 system consists of two main components: a wireless remote control and a dual outlet plug-in receiver.
Wireless Remote Control
The remote features a backlit LED display, various programming buttons, and a kickstand for tabletop use or a keyhole for wall mounting. It operates on 3 AAA batteries.
Image: The wireless remote control, showing its dimensions (4.13 inches height, 1.13 inches depth, 2.63 inches width) and labeled buttons for easy ON/OFF, custom daily ON/OFF time, 3 daily preset options, and a custom countdown feature.
Image: A detailed view of the remote control, highlighting its features: Clock vs. Countdown mode indicator, scroll buttons for setting time, ON/OFF override buttons, My ON/OFF time buttons, Preset schedules (Evening, Morning, All Night), Active program indicator, and Backlight button.
Dual Outlet Plug-in Receiver
This weather-resistant unit plugs directly into a standard wall outlet and provides two grounded outlets for connecting your devices. It communicates wirelessly with the remote control up to 100 feet away.
Image: The outdoor plug-in receiver, illustrating its weather-resistant design, two grounded outlets, and dimensions (6.43 inches height, 1.75 inches depth, 3.13 inches width). It also indicates wireless range up to 100 feet.
Setup
1. Install Remote Batteries
Open the battery compartment on the back of the wireless remote control and insert the 3 AAA batteries, observing the correct polarity (+/-). Close the compartment securely.
2. Plug in the Receiver
Plug the dual outlet receiver into a standard 3-prong grounded wall outlet. The receiver is weather-resistant and suitable for both indoor and outdoor use. Ensure the location is secure and protected from excessive moisture.
3. Connect Devices
Plug the lights or appliances you wish to control into the two grounded outlets on the receiver.
4. Set Current Time on Remote
On the remote control, use the UP and DOWN arrow buttons to set the current time. The display will show AM/PM indicators.
Image: The remote control with arrows pointing to the scroll buttons for setting the current time and the custom ON/OFF time buttons, illustrating the fast and easy setup process.
Operating Instructions
The myTouchSmart timer offers various programming options to suit your scheduling needs.
Setting Custom ON/OFF Times
- Press the MY ON TIME button. The display will flash.
- Use the UP and DOWN arrow buttons to set your desired ON time.
- Press the MY OFF TIME button. The display will flash.
- Use the UP and DOWN arrow buttons to set your desired OFF time.
- The custom schedule is now set and will repeat daily.
Image: Two remote controls demonstrating setting a custom ON/OFF time (e.g., ON at 6:30 P.M., OFF at 10:00 P.M. every Friday). Below, three preset schedule options are shown: Evening (5 P.M. - 12 A.M.), Morning (5 A.M. - 8 A.M.), and All Night (6 P.M. - 6 A.M.).
Using Preset Schedules
The timer includes three convenient preset options:
- Evening (5 PM - 12 AM): Press the EVENING button to activate this schedule.
- Morning (5 AM - 8 AM): Press the MORNING button to activate this schedule.
- All Night (6 PM - 6 AM): Press the ALL NIGHT button to activate this schedule.
Only one preset or custom schedule can be active at a time. The blue indicator light next to the button will show the active program.
Countdown Timer
To set a countdown timer (from 1 minute to 24 hours):
- Press the MY COUNTDOWN button. The display will show '00:00' and flash.
- Use the UP and DOWN arrow buttons to set the desired countdown duration.
- Press MY COUNTDOWN again to start the countdown. The connected devices will turn ON for the set duration and then turn OFF.
Manual ON/OFF Override
To manually turn the connected devices ON or OFF, overriding any active program:
- Press the ON button to turn the devices ON.
- Press the OFF button to turn the devices OFF.
This manual override will remain active until the next scheduled program event or until another program is selected.
Controlling Multiple Receivers
One wireless remote control can operate multiple myTouchSmart indoor and outdoor receivers (sold separately). To control additional receivers, simply plug them in and they will respond to the same remote's signals within range.
Maintenance
Battery Replacement
When the remote control display becomes dim or unresponsive, it is time to replace the 3 AAA batteries. Open the battery compartment on the back of the remote, remove the old batteries, and insert new ones, ensuring correct polarity. The backup battery in the receiver saves custom settings if unplugged, but the remote's batteries are essential for programming and manual control.
Cleaning
Wipe the timer and remote with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
Troubleshooting
- Devices not turning ON/OFF as scheduled:
- Check if the remote control batteries are low or depleted. Replace if necessary.
- Ensure the receiver is securely plugged into a working outlet.
- Verify that the connected devices are properly plugged into the receiver and are switched ON.
- Confirm that the current time and programmed schedules are set correctly on the remote.
- Ensure the remote is within the 100-foot wireless range of the receiver.
- Remote display is dim or blank:
- Replace the 3 AAA batteries in the remote control.
- Connected devices do not respond to manual ON/OFF:
- Check remote batteries.
- Ensure the receiver is powered.
- Confirm the remote is within range.
Specifications
| Brand | myTouchSmart |
| Model Number | 35167 |
| Electrical Rating | 125V AC, 60 Hz |
| Maximum Load | 15A Resistive, 1250W Tungsten, 1/2 HP |
| Compatibility | LED, CFL, Incandescent, Halogen bulbs (works with dimmable LED/CFL) |
| Remote Range | Up to 100 feet |
| Remote Batteries | 3 x AAA (included) |
| Receiver Outlets | 2 Grounded Outlets |
| Material | Plastic |
| Receiver Dimensions | 2.5"D x 2.5"W x 7"H (approximate) |
| Item Weight | 11.2 ounces (approximate) |
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your product packaging or visit the official myTouchSmart website. This product is UL Listed.
