Vanish Oxi Action Stain Remover Washing Liquid (400 ml) - Instruction Manual

1. Introduction

Vanish Oxi Action Stain Remover Washing Liquid is an expert laundry additive designed to tackle tough stains and enhance the cleaning power of your regular detergent. Its advanced oxygen formula effectively removes dried-on stains and helps whiten whites and brighten colored garments, providing a thorough clean for your everyday clothes. This 400 ml liquid is safe for use on both colored and white fabrics.

Image 1: Front view of Vanish Oxi Action Stain Remover Washing Liquid 400 ml bottle.

2. Safety Information

Important Usage Advice: Always follow washing instructions on garment label. Check for colorfastness by testing on an inconspicuous area of the fabric. Rinse and allow to dry away from sources of direct heat and sunlight. Do not use on garments requiring dry cleaning. Do not use on leather, suede, or silk fabrics.

Safety Information:

• Do not mix with any chlorine-based bleach product.
• If product gets into eyes, rinse immediately with plenty of water and seek medical advice.
• Wear suitable gloves when handling.
• Keep out of reach of children.
• Store in a cool, dry place.

Image 2: Back label of Vanish Oxi Action bottle detailing safety and usage instructions.

3. Preparation for Use

Vanish Oxi Action Stain Remover Liquid is ready to use directly from the bottle for pre-treatment, soaking, or adding to your wash. No prior mixing is required for the liquid form.

4. Operating Instructions

Vanish Oxi Action Liquid can be used in three primary ways to effectively remove stains and enhance laundry cleanliness:

4.1. Pre-Treat (Tough Stains)

1. Apply 2 ml of Vanish liquid directly onto the stain.
2. Gently rub the liquid into the stain using the cap or a clean cloth.
3. Leave the product on the stain for a maximum of 10 minutes. Do not allow the product to dry on the fabric.
4. Wash as usual with your regular detergent.

Image 3: Visual guide for spot application, soaking, and in-wash methods.

4.2. Soak (Tough and Dried-on Stains)

1. Add 100 ml of Vanish liquid to 4 liters of water.
2. For white clothes, soak for a maximum of 6 hours.
3. For colored clothes, soak for a maximum of 1 hour.
4. After soaking, wash as usual or rinse thoroughly.

4.3. In-Wash (Normal Stains & Brightening)

1. Add 50 ml of Vanish liquid on top of your regular detergent in the washing machine drawer.
2. Wash as usual.

For best results on stains, rub before rinsing.

4.4. Product Demonstration Videos

5. Maintenance

To maintain the effectiveness of Vanish Oxi Action Liquid, ensure the bottle is tightly closed after each use and stored in a cool, dry place away from direct sunlight. Always keep the product in its original container.

6. Troubleshooting

If stains persist after initial treatment, repeat the application process, focusing on the pre-treat or soak methods for tougher stains. Ensure you are following the recommended soaking times for colored and white garments. Always check garment care labels before use.

7. Product Specifications

8. Warranty and Support

Specific warranty information for this product is not provided in the available data. For product support, inquiries, or concerns, please refer to the manufacturer's contact information provided on the product packaging.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is for laundry use only.

9. Contact Information

Manufactured in India by Reckitt Benckiser (India) Pvt. Ltd.

• Toll Free No: 1800 102 7245
• Email: indiahelp@rb.com