Introduction
This manual provides essential information for the safe and effective use of your BEPER 50.700 Handheld Steam Cleaner. Please read these instructions carefully before operating the appliance and retain them for future reference. The BEPER 50.700 is designed for sanitizing and disinfecting various surfaces in your home using high-temperature steam.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury.
- Always ensure the appliance is unplugged before filling or emptying the water tank.
- Do not direct steam at people, animals, or electrical appliances. Steam is very hot and can cause burns.
- The steam temperature can reach up to 135°C. Exercise extreme caution.
- This appliance features a double safety power button to prevent accidental activation, especially by children.
- Keep the appliance out of reach of children and supervise them when the appliance is in use.
- Do not immerse the appliance in water or any other liquid.
- Use only clean tap water. Do not add detergents, perfumes, or other chemicals to the water tank.
- Regularly inspect the power cord for damage. Do not operate if the cord is damaged.
- Ensure the steam nozzle is clear before use.
Product Components
Your BEPER 50.700 Steam Cleaner comes with a variety of accessories designed for different cleaning tasks:
- Main Unit: Handheld steam cleaner with ergonomic handle and safety button.
- Round Brush: For scrubbing stubborn dirt on various surfaces.
- Angle Nozzle: For reaching tight corners and difficult areas.
- Long Spray Nozzle: For focused steam application.
- Glass and Window Nozzle: For streak-free cleaning of glass surfaces.
- Fabric Cloth: For use with the glass/window nozzle or other attachments for delicate surfaces.
- Flexible Extension Hose: For extended reach and flexibility during cleaning.
- Funnel: For easy and safe water filling.
- Measuring Cup: For precise water measurement.
Image: Overview of the various accessories included with the BEPER 50.700 Steam Cleaner, such as brushes, nozzles, and extension hose.
Setup
- Unpack: Carefully remove all components from the packaging.
- Fill Water Tank: Ensure the appliance is unplugged. Unscrew the safety cap. Use the provided measuring cup and funnel to fill the aluminum boiler with up to 350 ml of clean tap water. Do not overfill.
- Secure Cap: Screw the safety cap back on tightly.
- Attach Accessory: Select the appropriate accessory for your cleaning task and firmly attach it to the steam outlet.
- Power Connection: Plug the power cord into a suitable electrical outlet. The working light will illuminate.
Image: Demonstrates the process of filling the steam cleaner's water tank with water using the provided accessories.
Operating Instructions
- Heating: After plugging in, the appliance will begin heating the water. This process takes approximately 3 minutes. The working light indicates the heating status.
- Steam Ready: Once the water is heated, the steam cleaner is ready for use.
- Activate Steam: Press and hold the steam button, which features a double safety mechanism, to release steam. For continuous steam, there is a lock feature on the button.
- Cleaning Surfaces:
- For floors, use the appropriate nozzle and cloth.
- For upholstery and carpets, use the fabric cloth attachment.
- For windows and glass, use the glass and window nozzle for best results.
- For hard-to-reach areas or stubborn dirt, utilize the angle nozzle or round brush.
- Duration: A full 350 ml tank provides approximately 15 minutes of continuous steam.
- Refilling: If the steam output decreases or stops, unplug the unit and allow it to cool down completely before refilling the water tank. Never attempt to open the cap while the unit is pressurized or hot.
- Finishing: After cleaning, release any remaining steam, unplug the appliance, and allow it to cool before storing.
Image: Key features and operational indicators of the BEPER 50.700 Steam Cleaner, including its quick heating and safety button.
Image: Shows the steam cleaner in action on different surfaces like a kitchen sink, window, and carpet, demonstrating its versatility.
Image: A visual representation of the cleaning effectiveness, showing a stovetop before and after using the steam cleaner.
Maintenance and Cleaning
Proper maintenance ensures the longevity and optimal performance of your steam cleaner.
- Cool Down: Always ensure the appliance is unplugged and completely cooled before cleaning or storing.
- Empty Water: After each use, carefully empty any remaining water from the tank.
- Clean Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean Accessories: Rinse accessories with water and allow them to air dry. Remove any debris from brushes or nozzles.
- Descaling (Periodically): Depending on water hardness, mineral deposits may build up in the boiler. To descale, fill the tank with a solution of equal parts water and white vinegar. Heat the unit for a few minutes (do not allow it to steam fully), then unplug and let it sit for several hours or overnight. Empty the solution and rinse thoroughly with fresh water several times before normal use.
- Storage: Store the steam cleaner and its accessories in a cool, dry place, out of reach of children.
Troubleshooting
Before contacting customer support, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No steam or low steam output. | Water tank is empty or low. Unit not heated sufficiently. Nozzle is blocked. | Unplug, allow to cool, then refill water tank. Wait 3 minutes for heating. Clean the nozzle. |
| Water leaking from nozzle. | Unit not fully heated. Condensation. | Allow the unit to heat for the full 3 minutes. This is normal at the start of operation. |
| Power light not on. | Appliance not plugged in. Power outlet malfunction. | Ensure the power cord is securely plugged into a working outlet. Check the circuit breaker. |
Specifications
- Model Number: 50.700
- Power: 1050 Watts
- Water Tank Capacity: 350 Milliliters
- Steam Pressure: 3.2 Bar
- Steam Output: 30 g/min
- Cable Length: 3 Meters
- Maximum Temperature: 135°C
- Heating Time: Approximately 3 Minutes
- Operating Time (Full Tank): Approximately 15 Minutes
- Product Dimensions (L x W x H): 14.5 x 25.5 x 23.5 cm
- Item Weight: 1.18 Kilograms
- Power Source: Corded Electric
- Voltage: 240 Volts
- Color: Yellow/Black
Image: Visual representation of the steam cleaner highlighting its main technical specifications.
Warranty and Support
For warranty information, product support, or to inquire about spare parts, please refer to the documentation provided with your purchase or contact BEPER customer service. Keep your proof of purchase for warranty claims.
Manufacturer: Beper
Date of first availability on Amazon.com.be: October 2, 2022