Introduction
This manual provides essential information for the safe and efficient operation of your Sharp CD-BH950 240W 5-Disc Mini Shelf Speaker System. This system features a 5-disc CD changer, cassette deck, digital player, AM/FM radio, and Bluetooth connectivity, offering a versatile audio experience. Please read this manual thoroughly before using the product and retain it for future reference.
What's in the Box
- Main Unit (CD-BH950)
- Two Main Channel Speakers
- Remote Control
- AM Loop Antenna
- FM Wire Antenna
- User Manual (this document)
Setup
1. Unpacking and Placement
Carefully remove all components from the packaging. Place the main unit on a stable, flat surface. Position the two main channel speakers on either side of the main unit, ensuring they are at an equal distance for optimal stereo sound. Allow adequate ventilation around the unit.
Image: Front view of the Sharp CD-BH950 system, showing the central unit with a 5-disc CD changer and control panel, flanked by two detachable speakers.
2. Speaker Connection
Connect the speaker wires from the main unit to the corresponding terminals on the back of each speaker. Ensure correct polarity (positive to positive, negative to negative) for proper sound reproduction. The speaker wires are approximately 46 inches long.
3. Antenna Connection
Connect the supplied AM loop antenna and FM wire antenna to their respective jacks on the rear of the main unit. Extend the FM wire antenna fully for better reception. Position the AM loop antenna away from the main unit to minimize interference.
4. Power Connection
Plug the AC power cord into a standard wall outlet. The unit will enter standby mode.
Operating Instructions
Power On/Off
Press the POWER button on the main unit or remote control to turn the system on or off.
Adjusting Volume
Rotate the VOLUME knob on the main unit or use the VOLUME +/- buttons on the remote control to adjust the sound level.
CD Playback
- Press the CD button to select CD mode.
- Press the OPEN/CLOSE button on the main unit to open the disc tray.
- Place up to five CDs on the disc tray with the label side facing up.
- Press the OPEN/CLOSE button again to close the tray.
- Press PLAY/PAUSE to start playback.
- Use the SKIP buttons to navigate tracks or the DISC SKIP button to change discs.
The system supports CD-RW, CD-R, WMA, and MP3 playback formats.
Cassette Playback
- Press the TAPE button to select Cassette mode.
- Open the cassette deck door and insert a cassette tape.
- Press PLAY to begin playback.
- Use REWIND or FAST FORWARD buttons for navigation.
Bluetooth Connectivity
- Press the BLUETOOTH button to enter Bluetooth pairing mode. The display will show "PAIRING".
- On your Bluetooth-enabled device (smartphone, tablet, etc.), search for available devices.
- Select "SHARP CD-BH950" from the list.
- Once paired, the display will show "CONNECTED". You can now stream audio from your device to the system.
The system is compatible with Apple and Android devices.
AM/FM Radio
- Press the TUNER button to select AM or FM mode.
- Press the TUNE +/- buttons to manually tune to a station.
- Press and hold TUNE +/- to automatically scan for the next available station.
- To preset a station, tune to the desired frequency, then press MEMORY followed by a preset number (1-40).
USB Playback
Insert a USB flash drive into the USB port on the front of the main unit. The system will automatically switch to USB mode and begin playing compatible audio files (e.g., MP3, WMA).
Image: Top-down view of the Sharp CD-BH950 system, showing the main unit, two speakers, and the included remote control.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit and speakers. Do not use liquid cleaners or aerosol sprays.
- Disc Tray: Keep the disc tray clean and free of dust. Avoid touching the lens inside the CD compartment.
- Cassette Deck: Periodically clean the tape heads and pinch rollers using a specialized cassette deck cleaning kit.
- Ventilation: Ensure the ventilation openings on the unit are not blocked to prevent overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not securely plugged in. | Check power cord connection to the unit and wall outlet. |
| No sound | Volume is too low or muted. Speaker wires are not connected correctly. | Increase volume. Check speaker wire connections and polarity. |
| CD does not play | Disc is dirty, scratched, or inserted incorrectly. Incorrect mode selected. | Clean the disc. Reinsert the disc with the label side up. Select CD mode. |
| Poor radio reception | Antenna not properly positioned or connected. Interference from other electronics. | Adjust antenna position. Move unit away from other electronic devices. |
| Bluetooth pairing fails | Device is too far from the unit. Bluetooth not enabled on device. | Ensure device is within range. Enable Bluetooth on your device and retry pairing. |
Specifications
- Model: CD-BH950
- Output Power: 240W @ 47Kohms total output power
- Speaker Configuration: 2 x main channel speakers (5 1/8" woofer, 2" tweeter)
- CD Compatibility: CD-RW, CD-R, WMA, MP3
- Tuner: Digital AM/FM with 40 presets
- Connectivity: Bluetooth, Audio line-in, USB
- Dimensions (L x W x H): 27.6 x 13.1 x 13.5 inches
- Weight: 23.1 pounds
- Color: Black
Warranty and Support
For warranty information and technical support, please refer to the warranty card included with your product or visit the official Sharp website. Keep your proof of purchase for warranty claims.
Online Resources: For additional support and frequently asked questions, please visit the Sharp support page.
