PERLESMITH PSDSK2 Double Floating AV Wall Mount Shelf Instruction Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PERLESMITH PSDSK2 Double Floating AV Wall Mount Shelf. Designed for organizing media components, this shelf offers a space-saving solution for various devices. Please read this manual thoroughly before installation and use to ensure proper setup and safety.

Important Safety Information

WARNING: Exceeding the weight limit of 17.6 lbs per shelf and improper cable management can lead to personal injury or property damage. Always ensure proper mounting and cable management. This product is designed for single wood stud and concrete/brick walls. Do not install on drywall alone without proper anchoring into a stud or concrete/brick.

Package Contents

Please verify that all components are present before beginning installation. Refer to the included hardware pack for specific items.

• Wall mounting bracket
• Tempered glass shelves (2)
• Shelf support arms
• Cable management strips
• Mounting hardware (screws, anchors, washers)
• Instruction manual

Specifications

Setup and Installation

Follow these steps carefully to install your PERLESMITH PSDSK2 Double Floating AV Wall Mount Shelf. Ensure you have the necessary tools (e.g., drill, level, screwdriver) before starting.

1. Prepare the Mounting Location

Identify a suitable location on a single wood stud, concrete, or brick wall. Use a stud finder for wood studs. Mark the desired height for the top of the wall bracket.

2. Install the Wall Bracket

1. Position the wall bracket at the marked location and use a level to ensure it is straight.
2. Mark the drilling points through the holes on the bracket.
3. Drill pilot holes at the marked points. For wood studs, use a smaller drill bit. For concrete/brick, use a masonry drill bit and insert wall anchors.
4. Secure the wall bracket to the wall using the provided screws.

3. Assemble and Attach Shelves

1. Attach the shelf support arms to the tempered glass shelves using the provided screws and rubber pads. The rubber pads protect the glass and ensure stability.
2. Slide the assembled shelves onto the wall bracket. The design allows for flexible positioning along the vertical track.
3. Adjust each shelf to your desired height. The adjustable feature allows customization for various component sizes.
4. Tighten the screws on the shelf support arms to secure the shelves in place.

4. Cable Management

The integrated cable manager runs the length of the bracket, allowing you to route and conceal cables for a clean setup.

1. Gather all cables from your devices.
2. Feed the cables through the designated channels within the wall bracket.
3. Use the provided cable management strips or ties to bundle and secure the cables, preventing tangles and maintaining a tidy appearance.

Installation Videos

For a visual guide on the installation process, please refer to the following official product videos:

Operating Instructions

Once installed, the PERLESMITH PSDSK2 shelf is ready for use. Place your desired AV components, such as DVD players, game consoles, cable boxes, or Wi-Fi routers, onto the tempered glass shelves. Ensure that the total weight on each shelf does not exceed 17.6 lbs (8 kg).

• Weight Distribution: Distribute the weight evenly across the shelf surface to maintain stability.
• Device Placement: Position devices to allow for adequate ventilation, especially for electronics that generate heat.
• Cable Management: Utilize the integrated cable management system to route and conceal wires for a neat and organized appearance.

Maintenance

To maintain the appearance and functionality of your PERLESMITH PSDSK2 shelf:

• Cleaning: Wipe the tempered glass shelves and metal components with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Regular Checks: Periodically inspect all mounting screws and connections to ensure they remain secure. Tighten if necessary.

Troubleshooting

• Shelf Wobbles: Ensure all screws securing the shelf to the wall bracket and the glass to the support arms are tightened. Verify that the wall mounting is secure and properly anchored.
• Cables are Visible: Re-route cables through the integrated cable management channel. Ensure all cables are neatly tucked away.
• Shelf Not Level: Check the wall mounting bracket for levelness during installation. Adjust if possible, or re-install if significantly off-level.

Warranty and Customer Support

PERLESMITH stands behind the quality of its products. For warranty information or any questions regarding your PSDSK2 Floating AV Wall Mount Shelf, please contact our US-based customer support team. Refer to the product packaging or the PERLESMITH official website for contact details.