auna Belle Epoque 1908 All-in-One Retro Stereo System User Manual

Introduction

The auna Belle Epoque 1908 is a versatile retro stereo system designed to bring your music collection to life. This all-in-one device combines a turntable, CD player, cassette player, DAB+/FM radio, USB playback, and Bluetooth connectivity, all housed in a stylish vintage design. This manual provides detailed instructions for setting up, operating, and maintaining your system to ensure optimal performance and longevity.

What's in the Box

• Main Unit (auna Belle Epoque 1908 Stereo System)
• Instruction Manual (in English, French, German)
• Cable Antenna
• Remote Control (with battery)
• 45 RPM Adapter (for turntable)

Setup

1. Unpacking: Carefully remove the stereo system and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Placement: Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.
3. Power Connection: Connect the power cable to the AC IN port on the back of the unit and then plug it into a standard wall outlet (AC 100-240 V, 50/60 Hz).
4. Antenna Connection: Connect the cable antenna to the FM antenna input on the back of the unit for optimal radio reception. Extend the antenna fully for best results.
5. Remote Control: Insert the provided CR2025 battery into the remote control, ensuring correct polarity.

Operating Instructions

Use the POWER button to turn the unit on or off. The FUNCTION button or the remote control allows you to switch between different playback modes (Turntable, CD, Cassette, Radio, USB, Bluetooth).

1. Turntable Operation

1. Lift the turntable lid.
2. Place a vinyl record on the platter. If playing a 45 RPM single, use the included 45 RPM adapter.
3. Select the appropriate speed (33 1/3, 45, or 78 RPM) using the speed selector switch.
4. Gently release the tone arm from its rest and position the stylus over the desired track on the record.
5. Lower the tone arm slowly onto the record. Playback will begin automatically.
6. The automatic stop function will halt the platter rotation when the record finishes playing, protecting the stylus and record. To stop playback manually, lift the tone arm and return it to its rest.

2. CD Player Operation

1. Press the FUNCTION button to select CD mode.
2. Press the EJECT button to open the CD tray.
3. Place a CD (CD, CD-R, CD-RW, MP3-CD) with the label side facing up into the tray.
4. Press the EJECT button again to close the tray. The system will read the disc and begin playback.
5. Use the SKIP buttons (◀◀ / ▶▶) to navigate between tracks. Use the PLAY/PAUSE button (▶/▌▌) to pause or resume playback.

3. Cassette Player Operation

1. Press the FUNCTION button to select TAPE mode.
2. Insert a C60 or C90 cassette into the cassette deck.
3. Use the control buttons (Play, Stop, Fast Forward, Rewind) on the unit to operate the cassette player.

4. Radio Operation (DAB+/FM)

1. Press the FUNCTION button to select DAB or FM radio mode.
2. In DAB mode, the system will automatically scan for available stations. In FM mode, use the SCAN button to auto-scan or manually tune using the control knob.
3. Use the PRESET button to save your favorite stations. The unit supports up to 20 presets.
4. The RDS (Radio Data System) function provides additional information like station name and program type on the display.

5. USB Playback and Recording

1. Insert a USB flash drive into the USB port on the front of the unit.
2. Press the FUNCTION button to select USB mode. The system will automatically detect and play compatible audio files (MP3).
3. Recording Vinyl to USB: While playing a vinyl record, press the RECORD button on the unit or remote control. The system will convert the audio to MP3 and save it to the connected USB drive. Press RECORD again to stop recording.

6. Bluetooth Connectivity

1. Press the FUNCTION button to select Bluetooth (BT) mode. The display will show "BT" or a similar indicator, and the unit will enter pairing mode.
2. On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "auna Belle Epoque 1908" from the list of devices to pair.
4. Once paired, you can stream audio wirelessly from your device to the stereo system.

7. Remote Control

The included remote control provides convenient access to all functions. Ensure the battery is correctly inserted. Point the remote control directly at the unit's sensor.

Maintenance

• Cleaning: Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
• Stylus Care: Handle the turntable stylus with care. Clean it periodically with a soft brush designed for stylus cleaning. Replace the stylus when signs of wear appear to prevent damage to your records.
• Dust Cover: Keep the turntable lid closed when not in use to protect the platter and stylus from dust.
• Disc/Cassette Care: Keep CDs and cassettes clean and free of scratches or dust. Store them in their cases when not in use.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AUNA website. Keep your proof of purchase for any warranty claims.