Introduction
Welcome to your Dyson Airblade V HU02-N-HV hand dryer manual. This document provides essential information for the safe and efficient operation, installation, and maintenance of your device. The Dyson Airblade V HU02-N-HV is a high-speed hand dryer designed for quick and hygienic hand drying, featuring a re-engineered design for quieter operation and integrated HEPA filters.
A front view of the Dyson Airblade V HU02-N-HV hand dryer, showcasing its sleek silver and dark gray design. The Dyson logo is visible on the upper silver section, and the blue accent line indicates the air outlet.
Important Safety Instructions
Please read all safety instructions before installing or operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local electrical codes and regulations. Ensure the power supply matches the unit's requirements (208-240V, 50/60Hz).
- Authorized Use: This appliance is intended for hand drying purposes only. Do not use it for any other application.
- Maintenance: Disconnect power before performing any maintenance or cleaning. Only use genuine Dyson replacement parts for repairs.
- Environment: Do not install near water sources or in areas with excessive humidity. Ensure adequate ventilation around the unit.
- Obstructions: Keep hands, hair, loose clothing, and foreign objects clear of the air inlets and outlets during operation.
Installation Guide
This section outlines the steps for installing the Dyson Airblade V HU02-N-HV. Installation should only be performed by qualified personnel.
Pre-installation Checks
- Verify the power supply: The unit requires 208-240V, 50/60Hz, 1400 Watts.
- Ensure the mounting surface is structurally sound and capable of supporting the unit's weight.
- Consider ADA compliance for mounting height and clear floor space. The unit features an ADA compliant narrow profile.
- Note the operational ceiling of 6,550 feet above sea level for optimal performance.
Mounting the Unit
- Carefully unpack the hand dryer and inspect for any damage.
- Mark the desired mounting location on the wall, ensuring it meets accessibility guidelines and power supply proximity.
- Secure the innovative back plate to the wall using appropriate fasteners for the wall type. This design allows the dryer to be detached from the wall for convenient servicing.
- Connect the electrical wiring to the terminal block on the back plate, ensuring correct polarity and secure connections.
- Carefully align the main hand dryer unit with the mounted back plate and secure it in place.
- Restore power and test the unit's functionality.
Operating Your Hand Dryer
The Dyson Airblade V HU02-N-HV is designed for simple and efficient operation.
Powering On
Once correctly installed and connected to the power supply, the unit is ready for use. There is no external power button; the unit is activated by a sensor.
Hand Drying Procedure
- Place your hands under the air outlet. A proximity capacitive sensor will detect your hands and automatically activate the airflow.
- Move your hands slowly and steadily through the high-velocity air stream. The new V4 digital motor turns at 92,000 rpm to provide ultra-fast dry times.
- Continue moving your hands until they are dry. The airflow will cease automatically once your hands are removed from the sensor's range.
Maintenance and Care
Regular maintenance ensures optimal performance and longevity of your Dyson Airblade V HU02-N-HV hand dryer.
Cleaning
- Disconnect the power supply before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the durable, highly impact-resistant polycarbonate cover.
- Ensure the air inlets and outlets are free from dust and debris.
Filter Replacement
The unit is equipped with two built-in three-stage HEPA filters that clean the air before it touches your hands. These filters require periodic inspection and replacement to maintain air quality and dryer performance.
- Filter replacement should be performed by qualified service personnel.
- The innovative back plate design allows the dryer to be detached from the wall for more convenient servicing and filter changes.
- Refer to the service manual or contact Dyson customer support for detailed filter replacement procedures and recommended intervals.
Troubleshooting Common Issues
This section provides solutions for common operational problems. If the issue persists, contact Dyson customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer not activating | No power supply; Sensor obstructed; Sensor malfunction | Check circuit breaker/power connection; Ensure hands are within sensor range and no obstructions; Contact service if issue persists. |
| Reduced airflow | Clogged HEPA filters; Air inlets/outlets obstructed | Inspect and replace filters if necessary (by qualified personnel); Clear any obstructions from air pathways. |
| Unusual noise during operation | Internal component issue; Foreign object in air path | Disconnect power immediately; Inspect for visible foreign objects; Contact service for internal inspection. Note: The re-engineered unit is 30% quieter, operating at 63dB. |
| Dryer runs continuously | Sensor malfunction; Obstruction near sensor | Clear any objects near the sensor; Disconnect and reconnect power; Contact service. |
Technical Specifications
Key technical details for the Dyson Airblade V HU02-N-HV hand dryer.
| Feature | Detail |
|---|---|
| Brand | Dyson |
| Model Number | 307172-01 |
| Voltage | 208-240V |
| Frequency | 50/60Hz |
| Wattage | 1400 Watts |
| Noise Level | 63 Decibels |
| Filter Type | Two built-in three-stage HEPA filters |
| Dry Time | Ultra-fast (V4 digital motor) |
| Dimensions (H x W x D) | 15.5 x 9.25 x 5.75 inches |
| Special Features | Compact, HEPA filtration, Sensor Activated, ADA Compliant narrow profile |
| Operational Ceiling | 6,550 feet above sea level |
| Cover Material | Durable, highly impact resistant polycarbonate |
Warranty Information
For detailed warranty information regarding your Dyson Airblade V HU02-N-HV hand dryer, please refer to the warranty documentation included with your purchase. You can also visit the official Dyson website or contact Dyson customer support for specific terms and conditions applicable to your region.
Customer Support
Should you require technical assistance, service, or have any questions about your Dyson Airblade V HU02-N-HV hand dryer, please contact Dyson customer support. You can find contact details and additional resources by visiting the official Dyson website:
Please have your model number (307172-01) and purchase date available when contacting support.
