Introduction
This manual provides essential information for the safe and efficient use of your Plugable Surge Protector Power Strip with USB and 12 AC Outlets. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Overview
The Plugable PS12-USB25 is a surge protector power strip designed to safeguard your electronic devices from power surges while providing ample power and charging options. It features 12 AC outlets and 2 USB charging ports, all housed in a durable, sleek black design.
Key Features:
- 12 AC Outlets: Provides power for multiple devices. Four corner outlets are spaced wider to accommodate larger power adapters.
- Surge Protection: Offers 4320 Joules of protection against power surges, safeguarding connected electronics.
- USB Charging Ports: Two built-in USB ports (10.5W, 2.1A shared) for charging mobile devices.
- Integrated Circuit Breaker: A 2-in-1 power switch and circuit breaker provides overload protection.
- EMI/RFI Filter: Reduces electromagnetic and radio-frequency interference for cleaner power.
- Safety Covers: Sliding safety covers protect unused outlets from dust and accidental contact.
- Long Extension Cord: Equipped with a 25-foot (7.62m) power cord for extended reach.
- Mountable Design: Features mounting holes on the underside for secure installation.
Image: Top-down view of the Plugable Surge Protector, showcasing its 12 AC outlets, including four widely spaced corner outlets, and two central USB charging ports. The power strip is black with green accents and a green 'Grounded' indicator light visible on the side.
Setup
- Unpack the Device: Carefully remove the surge protector from its packaging. Inspect for any signs of damage.
- Placement: Position the surge protector on a flat, stable surface or mount it securely using the integrated mounting holes. Ensure it is away from sources of heat or moisture.
- Connect to Power: Plug the surge protector's 25-foot power cord into a standard 120V AC grounded wall outlet.
- Verify Grounding: Once plugged in, observe the indicator lights. A green "Grounded" light should illuminate, confirming that the unit is properly grounded and providing surge protection. If this light does not illuminate, the outlet may not be properly grounded, and the surge protector will not provide full protection. Consult a qualified electrician if necessary.
- Connect Devices: Plug your electronic devices into the AC outlets. Utilize the widely spaced corner outlets for larger power adapters. For mobile devices, use the two USB charging ports.
Image: The Plugable Surge Protector shown with its long 25-foot power cord, illustrating the extensive reach for flexible placement. The power strip itself is black with green accents around the outlets and a visible 'Grounded' indicator.
Operating Instructions
Powering On/Off:
- The 2-in-1 power switch also functions as a circuit breaker. Press the switch to the "ON" position to supply power to the outlets.
- To turn off power to all connected devices, press the switch to the "OFF" position.
Using AC Outlets:
- Insert device power plugs firmly into any of the 12 AC outlets.
- For large power adapters (wall warts), utilize the four widely spaced outlets located at the corners of the power strip to prevent blocking adjacent outlets.
- When an outlet is not in use, ensure its sliding safety cover is closed to prevent dust accumulation and accidental contact.
Using USB Charging Ports:
- Connect your mobile devices (smartphones, tablets, etc.) to the two USB charging ports using appropriate USB cables.
- The USB ports provide a shared output of 10.5W (2.1A). Charging speed may vary depending on the number of devices connected and their power requirements.
Image: The Plugable Surge Protector actively charging a tablet via one of its USB ports. This demonstrates the functionality of the integrated USB charging feature, with the tablet screen showing a charging indicator.
Maintenance
- Cleaning: Disconnect the surge protector from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the power cord and the surge protector for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately.
- Overload Protection: If the circuit breaker trips (the power switch pops out), it indicates an overload. Disconnect some devices, then reset the circuit breaker by pressing the power switch back to the "ON" position.
- Surge Protection Indicator: The "Grounded" indicator light confirms active surge protection. If this light goes out, the surge protection components may have been compromised by a significant power surge, and the unit should be replaced to ensure continued protection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to connected devices. | Power switch is OFF or circuit breaker tripped. | Ensure the power switch is ON. If it has tripped, reduce the load by unplugging some devices, then press the switch to reset. |
| "Grounded" indicator light is off. | Wall outlet is not grounded, or surge protection components are damaged. | Test the wall outlet with another grounded device. If the outlet is grounded, the surge protector's protection may be compromised; consider replacement. |
| USB devices not charging or charging slowly. | USB ports are overloaded, or device requires higher charging current. | Ensure total USB current draw does not exceed 2.1A. Some devices may require a dedicated high-power charger. |
| Devices not fitting into adjacent outlets. | Large power adapters blocking outlets. | Utilize the four widely spaced corner outlets for bulky adapters. |
Specifications
- Model: PS12-USB25
- AC Outlets: 12 (US Standard, 3-prong)
- USB Ports: 2 (10.5W / 2.1A shared)
- Surge Protection: 4320 Joules
- Voltage: 120V AC
- Cord Length: 25 feet (7.62 meters)
- Dimensions: 14 x 6 x 4 inches (approximate)
- Weight: 3.12 pounds (approximate)
- Special Features: Mountable, EMI/RFI Filter, Sliding Safety Covers, 2-in-1 Power/Circuit Breaker Switch
- Certifications: UL/cUL Rated
Image: A diagram illustrating the 25-foot (7.62m) cable length of the Plugable Surge Protector, emphasizing its extended reach for flexible power solutions.
Warranty and Support
For warranty information and technical support, please refer to the official Plugable website or contact Plugable customer service directly. Details are typically provided with your product packaging or available online.
Manufacturer: Plugable
Website: www.plugable.com
