mumbi 24279 Outdoor Radio-Controlled Socket Set Instruction Manual

1. Introduction

Thank you for choosing the mumbi 24279 Outdoor Radio-Controlled Socket Set. This set provides a convenient way to control outdoor electrical devices remotely. Designed for outdoor use, the sockets are splash-proof (IP44 rated) and suitable for various applications such as garden lighting, pond pumps, or other outdoor appliances up to 1100 Watts. Please read this manual carefully before use to ensure proper installation and safe operation.

2. Safety Instructions

• Electrical Safety: Always ensure that the total power consumption of connected devices does not exceed 1100 Watts (5A). Overloading can cause damage or fire.
• Outdoor Use: The sockets are rated IP44, meaning they are protected against splashing water from any direction. They are not designed for submersion in water. Ensure the protective cover is securely closed when not in use or when connecting devices.
• Grounding: These sockets are designed with a Type C, 2-pin European plug. Ensure compatibility with your local electrical outlets and grounding requirements. If your local outlets require a grounding pin, an appropriate adapter must be used.
• Interference: Wireless systems can be affected by interference from other 2.4 GHz devices, cordless phones, or microwaves. This may reduce the operating range.
• Placement: Do not install switches in the immediate vicinity of transformers, as this can cause mutual interference. The range is reduced when the signal must penetrate ceilings or walls.
• Children: Keep the product out of reach of children.
• Damage: Do not use the product if it is damaged. Contact customer support for assistance.

3. Package Contents

Verify that all items are present in your package:

• 2x mumbi Outdoor Radio-Controlled Sockets (IP44)
• 1x Remote Control
• 2x AAA Batteries (for remote control)
• 1x Instruction Manual

Image 3.1: Packaging of the mumbi 24279 Outdoor Radio-Controlled Socket Set, showing the two sockets and remote control.

4. Product Overview

4.1 Outdoor Socket

Each outdoor socket features a power input, an output socket with a protective cover, and a manual power button with an indicator light.

Image 4.1: Side view of the mumbi outdoor radio-controlled socket, showing its compact design.

Image 4.2: Front view of the mumbi outdoor radio-controlled socket with the protective cover closed, highlighting the power button and indicator light.

Image 4.3: Front view of the mumbi outdoor radio-controlled socket with the protective cover open, revealing the electrical outlet.

4.2 Remote Control

The remote control allows you to operate up to four individual sockets or all connected sockets simultaneously.

Image 4.4: The remote control for the mumbi outdoor sockets, showing buttons for individual control (A, B, C, D) and master control (ALL ON/OFF).

• Buttons A, B, C, D: Control individual sockets. Each button has an ON and OFF function.
• ALL ON/OFF: Controls all paired sockets simultaneously.

5. Setup

5.1 Remote Control Battery Installation

1. Open the battery compartment on the back of the remote control.
2. Insert the two AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment securely.

5.2 Pairing Sockets with Remote Control (Self-Learning Function)

The sockets feature a self-learning function for easy pairing.

1. Plug an outdoor socket into a suitable electrical outlet. The indicator light on the socket will flash slowly.
2. Within approximately 10 seconds of plugging in the socket, press the desired 'ON' button (A, B, C, or D) on the remote control.
3. The indicator light on the socket will stop flashing and remain steadily lit, confirming successful pairing.
4. Repeat this process for each additional socket, assigning them to different channels (A, B, C, or D) as desired.
5. To pair a socket to the 'ALL' function, press the 'ALL ON' button during the 10-second pairing window.

Note: If the indicator light does not flash or pairing fails, unplug the socket, wait a few seconds, and try again.

6. Operating Instructions

6.1 Controlling Individual Sockets

• To turn a specific socket ON, press the corresponding 'ON' button (A, B, C, or D) on the remote control.
• To turn a specific socket OFF, press the corresponding 'OFF' button (A, B, C, or D) on the remote control.

6.2 Controlling All Sockets

• To turn all paired sockets ON simultaneously, press the 'ALL ON' button on the remote control.
• To turn all paired sockets OFF simultaneously, press the 'ALL OFF' button on the remote control.

6.3 Manual Operation

Each socket has a manual power button. Pressing this button will toggle the power state (ON/OFF) of the socket, overriding the remote control setting until the remote control is used again.

7. Technical Specifications

8. Maintenance

8.1 Cleaning

Wipe the sockets and remote control with a soft, damp cloth. Do not use abrasive cleaners or immerse the devices in water.

8.2 Battery Replacement

If the remote control's range decreases or it stops responding, replace the AAA batteries as described in Section 5.1.

8.3 Storage

When not in use for extended periods, store the product in a dry, cool place, away from direct sunlight and extreme temperatures.

9. Troubleshooting

• Socket not responding to remote control:
  • Check if the remote control batteries are correctly inserted and have sufficient power. Replace if necessary.
  • Ensure the remote control is within the operating range (max. 30m) and there are no significant obstacles (thick walls, metal objects) blocking the signal.
  • Re-pair the socket with the remote control (refer to Section 5.2).
• Socket not powering on/off:
  • Check the power supply to the main outlet.
  • Ensure the connected device is functioning correctly.
  • Verify that the total wattage of connected devices does not exceed 1100W.
• Interference issues:
  • If other wireless devices are causing interference, try relocating the sockets or the interfering devices.

10. Warranty and Support

This mumbi product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or further inquiries, please contact mumbi customer service through their official website or your point of purchase.

Manufacturer: Claus GmbH

Product Model Number: 24279 mumbi-Aussen-Funksteckdose-2er

International Article Code (EAN): 04251077258061