1. Introduction
Welcome to the Nilox Doc Plus Electric Skateboard user manual. This guide provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your electric skateboard. Please read this manual thoroughly before your first ride to ensure a safe and enjoyable experience.
2. Important Safety Information
Riding an electric skateboard carries inherent risks. To minimize these risks and prevent injury, please adhere to the following safety guidelines:
- Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and wrist guards.
- Familiarize yourself with local laws and regulations regarding electric skateboard use.
- This product is not intended for children. Recommended age range is Teen, Youth, Adult.
- Do not ride in wet conditions, on slippery surfaces, or in heavy traffic.
- Maintain a safe distance from pedestrians, vehicles, and other obstacles.
- Perform a pre-ride check: ensure brakes are functional, wheels are secure, and battery is sufficiently charged.
- Avoid sudden acceleration or braking, especially at high speeds.
- Do not attempt stunts or extreme maneuvers.
- Never operate the skateboard under the influence of alcohol or drugs.
- Ensure the remote control is fully charged and paired before each use.
3. Package Contents
Upon unpacking your Nilox Doc Plus Electric Skateboard, please verify that all items listed below are present:
- Nilox Doc Plus Electric Skateboard
- Wireless Remote Control
- Power Adapter/Charger
- User Manual (this document)
Image: The Nilox Doc Plus Electric Skateboard packaging box, showing the skateboard and its accessories inside.
4. Product Overview
The Nilox Doc Plus Electric Skateboard features a durable deck, powerful motor, and intuitive remote control for an engaging riding experience. It also includes Bluetooth connectivity for app integration.
4.1 Skateboard Components
Image: Top and bottom views of the Nilox Doc Plus Electric Skateboard. The top shows the grip tape with 'DOC' logo, and the bottom shows the battery enclosure and motor assembly.
Image: Side view of the Nilox Doc Plus Electric Skateboard, highlighting the charging port and power button located on the battery enclosure.
4.2 Remote Control
Image: The compact black remote control for the Nilox Doc Plus Electric Skateboard, featuring an accelerator/brake slider and a power indicator light.
5. Setup
5.1 Charging the Skateboard
Before first use, fully charge the skateboard battery.
- Locate the charging port on the side of the skateboard's battery enclosure.
- Connect the power adapter to the charging port and plug the adapter into a standard electrical outlet.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- A full charge takes approximately 2.5 hours and provides an autonomy of up to 25 km.
5.2 Charging the Remote Control
Ensure the remote control is also charged for uninterrupted operation.
- Connect the remote control to a USB power source using the provided charging cable.
- An indicator light on the remote will show charging status.
- Charge until the indicator light signals a full charge.
5.3 Pairing the Remote Control
The remote control must be paired with the skateboard to function.
- Ensure both the skateboard and the remote control are powered off.
- Turn on the skateboard.
- Turn on the remote control.
- Press and hold the pairing button on the remote (refer to remote diagram if available) until the indicator light flashes, indicating pairing mode.
- The remote and skateboard should automatically connect. The indicator light on the remote will become solid when successfully paired.
6. Operating Instructions
6.1 Powering On/Off
- To power on the skateboard: Press and hold the power button on the skateboard's battery enclosure until the indicator light illuminates.
- To power off the skateboard: Press and hold the power button again until the indicator light turns off.
- To power on the remote: Press the power button on the remote.
- To power off the remote: Press and hold the power button on the remote.
6.2 Riding the Skateboard
Always start slowly and practice in a safe, open area.
- Place one foot on the front of the skateboard.
- Use your other foot to push off gently, gaining initial momentum.
- Once stable, place your second foot on the skateboard. Maintain a balanced stance.
- Use the remote control's accelerator to gradually increase speed.
- To brake, gently pull back on the remote control's brake lever/slider.
- Lean to steer, similar to a traditional skateboard.
6.3 Using the Remote Control
The remote control allows for precise speed and braking adjustments.
- Accelerator: Push the slider/lever forward to accelerate.
- Brake: Pull the slider/lever backward to brake.
- Speed Modes: Some models may have multiple speed modes. Refer to the remote's specific buttons for switching modes if applicable. The maximum speed is 12 km/h.
6.4 Bluetooth Connectivity and App
The Nilox Doc Plus features Bluetooth connectivity for enhanced functionality.
Image: The Nilox Doc Plus Electric Skateboard, indicating its Bluetooth connectivity feature.
- Download the official NILOX DOC app from your smartphone's app store.
- Ensure Bluetooth is enabled on your smartphone and the skateboard is powered on.
- Open the NILOX DOC app and follow the on-screen instructions to connect to your skateboard.
- The app allows you to track your routes, monitor speed, and view other ride statistics.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your skateboard.
- Cleaning: Wipe the skateboard with a damp cloth after each use. Avoid using harsh chemicals or excessive water. Do not submerge any part of the skateboard in water.
- Battery Care: Charge the battery regularly, even if not in use, to maintain its health. Do not allow the battery to fully discharge for extended periods. Store the skateboard in a cool, dry place.
- Wheel and Truck Inspection: Periodically check the wheels for wear and tear. Ensure all nuts and bolts on the trucks are tight.
- Storage: When storing for extended periods, ensure the battery is charged to about 50-70% and store in a dry, temperature-controlled environment.
8. Troubleshooting
If you encounter issues with your Nilox Doc Plus Electric Skateboard, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Skateboard does not turn on. | Low battery. | Charge the skateboard battery fully. |
| Remote control does not pair. | Remote battery low or out of range. | Charge the remote control. Ensure remote is within close proximity to the skateboard during pairing. Repeat pairing steps. |
| Skateboard loses power during ride. | Battery is low. | Recharge the skateboard battery. Avoid riding when battery is critically low. |
| Reduced range or speed. | Battery degradation, riding conditions (uphill, heavy load). | Ensure battery is fully charged. Consider battery replacement if significant degradation occurs over time. |
| Unusual noises from wheels/motor. | Loose components, debris in wheels. | Inspect wheels and motor for any obstructions or loose parts. Tighten any loose bolts. |
9. Specifications
Detailed technical specifications for the Nilox Doc Plus Electric Skateboard:
| Feature | Value |
|---|---|
| Model Number | 30NXSKMO00001 |
| Brand | Nilox |
| Maximum Speed | Up to 12 km/h |
| Autonomy (Range) | Up to 25 km |
| Charging Time | Approximately 2.5 hours |
| Connectivity | Bluetooth |
| Dimensions | 76 x 23 x 13 cm |
| Weight | 6 Kilograms |
| Main Material | Plastic |
| Wheel Material | Polyurethane |
| Battery Type | 1 Lithium-ion (included) |
| Recommended Age | Teen, Youth, Adult |
| Skill Level | Beginner |
10. Warranty and Support
Your Nilox Doc Plus Electric Skateboard is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, service, or warranty claims, please contact Nilox customer service through their official website or the contact information provided in your product packaging.
