Nyko Data Bank Plus

1. Product Overview

The Nyko Data Bank Plus is an innovative accessory designed to expand the storage capacity of your PlayStation 4 console. It allows you to utilize a larger, more economical 3.5-inch hard drive in conjunction with the console's original 2.5-inch hard drive, significantly increasing the available space for games, applications, and saved data. This unit integrates seamlessly with the PS4's design and offers a simple solution for storage expansion.

• Expands PS4 internal memory capacity by adding 3.5" and 2.5" drive options.
• Enables use of larger, more economical drives for game saves and installations.
• Compatible with most standard 3.5" and 2.5" hard drives (hard drives not included).
• Replaces the top cover of the PS4 and integrates with the internal hard drive bay.
• Features an LED indicator to show hard drive activity.

2. What's Included

Your Nyko Data Bank Plus package includes the following components:

• Data Bank 3.5" and 2.5" Hard Drive Enclosure
• Universal Cartridge
• Screwdriver
• Power Pass-Through Cord

3. Setup and Installation

Follow these steps carefully to install your Nyko Data Bank Plus. It is recommended to back up your PS4 saved data before beginning the installation process.

1. Prepare your PS4: Power off your PlayStation 4 console completely and disconnect all cables.
2. Remove PS4 Top Cover and Original HDD: Gently slide off the glossy top cover of your PS4. Locate the internal 2.5-inch hard drive bay. Use the included screwdriver to remove the single screw securing the original 2.5-inch hard drive, then carefully slide it out.



3. Insert Universal Cartridge: Slide the Universal Cartridge into the PS4's 2.5-inch hard drive bay. Ensure it is fully seated and secure it with the screw you removed earlier.
4. Attach Data Bank Enclosure: Carefully snap the Data Bank enclosure onto the top of your PS4 console, aligning it with the Universal Cartridge. Ensure the SATA cable from the Data Bank connects securely to the Universal Cartridge.



5. Install Hard Drives: Place your original 2.5-inch hard drive into the designated slot within the Data Bank enclosure. Then, insert your desired 3.5-inch SATA III hard drive into its respective slot.



6. Attach Cover and Power: Slide the Data Bank cover over the installed hard drives and enclosure. Finally, plug the included power pass-through cord into the PS4's power port, and then plug your PS4's power cord into the pass-through port. No additional AC adapter is required.



7. Initialize New Drive: After installation, you will need to initialize the new hard drive and reinstall the PlayStation 4 firmware. Detailed instructions for this process are typically provided with the Data Bank Plus or can be found on the official PlayStation support website. Ensure your PS4 firmware is version 3.50 or higher for optimal compatibility with larger hard drives.

4. Operating Instructions

The Nyko Data Bank Plus is designed for straightforward operation once installed.

Switching Hard Drives

The Data Bank Plus allows you to switch between the 3.5-inch and 2.5-inch hard drives. This is achieved by pressing a dedicated button on the unit. Ensure your console is powered off before attempting to switch hard drives.

LED Indicator

A front-facing LED indicator on the Data Bank Plus illuminates to show when the PlayStation 4 is actively accessing or saving content to the hard drive. This provides visual confirmation of data transfer.

5. Maintenance

To ensure the longevity and optimal performance of your Nyko Data Bank Plus, follow these general maintenance guidelines:

• Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the unit to extreme temperatures, humidity, or direct sunlight.
• Do not block the ventilation openings on the Data Bank Plus or the PS4.
• Handle the unit and your PS4 with care to prevent physical damage.

6. Troubleshooting

If you encounter issues with your Nyko Data Bank Plus, consider the following common solutions:

Hard Drive Not Recognized / Initialization Issues

• Check Connections: Ensure all connections, including the Universal Cartridge, SATA cables, and power pass-through, are securely seated before booting your PS4.
• Firmware Version: Verify that your PlayStation 4 is running firmware version 3.50 or higher. Older firmware versions may not fully support larger hard drive capacities.
• Hard Drive Format: It is recommended to format your new hard drive (especially 3.5" drives) to exFAT using a PC before installing it into the Data Bank Plus.
• Hard Drive Capacity: While the Data Bank Plus supports large drives, the PS4 operating system may have soft performance limitations with capacities significantly above 4TB. Issues with sleep mode or boot times may occur with very large drives (e.g., 5TB or 6TB and above) due to PS4 firmware limitations, not the Data Bank itself. Consider using a 4TB or smaller drive for optimal compatibility and performance.

Rest Mode / Suspend Mode Issues

• If experiencing issues with Rest Mode (suspend mode) when using higher capacity drives, this is often a limitation of the PS4 firmware rather than the Data Bank Plus. Ensure your PS4 firmware is up to date, as Sony may release updates to improve compatibility.
• Some users report that manually pressing and holding the power button for approximately 6 seconds to turn on the PS4 can help avoid booting into safe mode when using larger drives.

General Performance Issues

• Ensure the hard drives used are in good working condition.
• Verify that the correct hard drive is selected via the switch on the Data Bank Plus.

7. Specifications

*Note: Actual usable capacity may vary based on PS4 firmware and hard drive specifications.

8. Warranty and Support

For detailed warranty information regarding your Nyko Data Bank Plus, please refer to the documentation included with your product or visit the official Nyko website. Warranty terms and conditions may vary.

For further support, troubleshooting guides, or to contact customer service, please visit the official Nyko support website. Keep your product's model number (83239) handy when seeking support.

Official Nyko Website: Visit the Nyko Store on Amazon