Introduction
The My Arcade GamePad Classic is a wireless controller designed for use with the Nintendo NES Classic Edition, Wii, and Wii U consoles. It offers wireless freedom up to 30 feet, an ergonomic design for comfortable gameplay, and a convenient Home button for console menu access. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your controller.
Safety Information
- Do not expose the controller or adapter to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to strong impacts.
- Keep out of reach of small children.
- Do not attempt to disassemble or modify the controller or adapter. This will void the warranty.
- Dispose of batteries properly according to local regulations.
Package Contents
Verify that all items are present in your package:
- My Arcade GamePad Classic Wireless Controller
- Wireless Adapter
Setup
1. Battery Installation
The GamePad Classic requires two (2) AAA batteries (not included) for operation.
- Locate the battery compartment on the back of the controller.
- Open the battery compartment cover.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

2. Connecting the Wireless Adapter
The wireless adapter connects the controller to your console.
- For NES Classic Edition: Plug the wireless adapter into one of the controller ports on your NES Classic Edition console.
- For Wii/Wii U: Plug the wireless adapter into the Nunchuk port of a Wii Remote (Wii Remote sold separately).

3. Pairing the Controller
After installing batteries and connecting the adapter, pair the controller with the adapter:
- Ensure your console is powered on.
- Press the Start button on the GamePad Classic controller. The LED indicator on the adapter should blink.
- Hold the Start button for approximately 1 second until the controller pairs with the adapter. The LED on the adapter will become solid when successfully paired.
- The controller is now ready for use.
Operating Instructions
Controller Layout and Functions

- D-Pad (Directional Pad): Used for movement and navigation in games and menus.
- A Button: Primary action button, typically for jumping, attacking, or confirming selections.
- B Button: Secondary action button, often for running, shooting, or canceling actions.
- Select Button: Used for various in-game functions, such as changing weapons or accessing sub-menus.
- Start Button: Used to pause games, access main menus, or confirm selections.
- Home Button: Pressing both Select and Start buttons simultaneously will return you to the console's main menu (for NES Classic Edition). This feature eliminates the need to press the reset button on the console itself.
Compatibility
The GamePad Classic is compatible with:
- Nintendo NES Classic Edition
- Nintendo Wii (for supported Virtual Console games)
- Nintendo Wii U (for supported Virtual Console games)
When used with Wii or Wii U, the adapter plugs into a Wii Remote, and the controller functions as a Classic Controller or Classic Controller Pro, depending on the game's requirements.
Battery Life
With two fresh AAA batteries, the controller provides over 75 hours of gameplay. Actual battery life may vary based on usage and battery type.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the controller. Do not use liquid cleaners or solvents.
- Battery Replacement: Replace batteries when the controller's performance degrades or it fails to connect. Always replace both batteries at the same time with new ones.
- Storage: When not in use for extended periods, remove the batteries from the controller to prevent leakage. Store the controller and adapter in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller does not turn on or respond. | Dead or incorrectly installed batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Controller does not connect to the console. | Not paired correctly; adapter not properly connected; interference. | Ensure adapter is firmly plugged into the console/Wii Remote. Re-attempt pairing by holding the Start button. Move closer to the console to reduce interference. |
| Input lag or delayed response. | Distance from adapter; battery low; wireless interference. | Reduce distance between controller and adapter. Replace batteries. Ensure no other wireless devices are causing interference nearby. |
| Home button (Select + Start) does not return to menu. | Feature specific to NES Classic Edition; not supported on Wii/Wii U. | This function is primarily for the NES Classic Edition. For Wii/Wii U, use the Wii Remote's Home button or in-game menu options. |
Specifications
- Model Number: DGUN-2927
- Dimensions: 5.25 x 1.5 x 6.75 inches
- Item Weight: 4.8 ounces
- Wireless Range: Up to 30 feet (9 meters)
- Power Source: 2 x AAA batteries (not included)
- Compatibility: Nintendo NES Classic Edition, Nintendo Wii, Nintendo Wii U
- Manufacturer: My Arcade
Warranty and Support
My Arcade products are designed for quality and reliability. For warranty information, technical support, or customer service inquiries, please visit the official My Arcade website or contact their customer support directly. Please retain your proof of purchase for warranty claims.





