Pelco by Schneider Electric EVO-05LID Evo Mini 360 Indoor IP Camera User Manual

1. Introduction

Thank you for choosing the Pelco by Schneider Electric EVO-05LID Evo Mini 360 Indoor IP Camera. This compact and discreet surveillance camera is designed for indoor use, offering a 360-degree panoramic view with a 5-megapixel sensor. It is compatible with Oncam Grandeye 3D dewarping software, providing comprehensive coverage for various indoor environments. This manual provides essential information for the proper installation, operation, and maintenance of your camera.

Image: The Pelco by Schneider Electric EVO-05LID Evo Mini 360 Indoor IP Camera, a compact white dome camera designed for discreet indoor surveillance.

2. Safety Information

• Indoor Use Only: This camera is designed exclusively for indoor environments. Do not expose it to outdoor conditions, moisture, or extreme temperatures.
• Power Supply: Use only the specified power supply for this device. Incorrect voltage can cause damage or fire.
• Installation: Ensure the camera is securely mounted to prevent it from falling. Follow all local electrical and building codes during installation.
• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid or aerosol cleaners.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Please check the package contents upon unpacking. While specific contents may vary, a typical package for the EVO-05LID camera includes:

• Pelco by Schneider Electric EVO-05LID Evo Mini 360 Indoor IP Camera
• Mounting hardware (screws, anchors)
• Quick Start Guide or documentation
• Power adapter (may be sold separately depending on region/retailer)

4. Setup

4.1 Mounting the Camera

The EVO-05LID camera is designed for wall mount installation. Ensure the mounting surface is strong enough to support the camera's weight.

1. Choose a suitable indoor location that provides the desired field of view and is within range of your Wi-Fi network and power source.
2. Use the provided mounting template (if included) to mark the drill holes on the wall.
3. Drill pilot holes and insert wall anchors if necessary.
4. Secure the camera's mounting base to the wall using the provided screws.
5. Attach the camera body to the mounting base, ensuring it is firmly locked in place.

4.2 Power Connection

Connect the power adapter to the camera's power input port, then plug the adapter into a standard electrical outlet. The camera will power on automatically.

4.3 Network Connection (Wi-Fi)

The EVO-05LID supports Wi-Fi connectivity. Refer to the camera's specific software or mobile application instructions for initial network setup. Typically, this involves:

1. Downloading the manufacturer's recommended application to your smartphone or computer.
2. Creating an account and logging in.
3. Following the in-app instructions to add a new device, which usually involves scanning a QR code on the camera or connecting to a temporary Wi-Fi hotspot created by the camera.
4. Selecting your home Wi-Fi network and entering the password.

Ensure your Wi-Fi network is 2.4GHz, as some IP cameras may not support 5GHz networks.

5. Operating the Camera

5.1 Live View and Recording

Once connected to your network, you can access the live video feed through the dedicated software or mobile application. From the application, you can typically:

• View the 360-degree panoramic feed.
• Utilize the Oncam Grandeye 3D dewarping software features to view specific areas of the 360-degree image in a rectified, non-distorted format.
• Initiate manual recordings or configure motion-activated recording schedules.
• Access recorded footage stored on a local SD card (if supported and installed) or cloud storage (if subscribed).

5.2 Remote Control

The camera can be controlled remotely via the application, allowing you to adjust settings, view live feeds, and manage recordings from anywhere with an internet connection.

6. Maintenance

6.1 Cleaning

To maintain optimal image quality, periodically clean the camera lens. Disconnect power before cleaning. Use a soft, lint-free cloth to gently wipe the lens. Avoid abrasive cleaners or solvents that could damage the lens coating.

6.2 Firmware Updates

Regularly check for firmware updates through the camera's application or the manufacturer's website. Firmware updates can improve performance, add new features, and enhance security. Follow the provided instructions carefully when performing updates.

7. Troubleshooting

• No Power: Ensure the power adapter is securely connected to both the camera and a working electrical outlet. Try a different outlet.
• No Network Connection: Verify your Wi-Fi router is on and functioning. Check if the camera is within Wi-Fi range. Restart the camera and your router. Re-attempt the network setup process if necessary.
• Poor Image Quality: Clean the camera lens. Ensure there is adequate lighting in the surveillance area. Check for obstructions in the camera's field of view.
• Cannot Access Live View: Ensure your smartphone or computer has an active internet connection. Verify that the camera is online in the application.
• Application Issues: Try restarting the application or your device. Ensure the application is updated to the latest version.

If problems persist, consult the manufacturer's online support resources or contact customer service.

8. Specifications

9. Warranty and Support

9.1 Warranty Information

Please note that the manufacturer's warranty description for this product states "No Warranty". It is advisable to confirm warranty terms with your retailer at the time of purchase.

9.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Pelco by Schneider Electric EVO-05LID camera, please visit the official Schneider Electric website or contact their customer support directly. Keep your product model number (EVO-05LID) and any purchase information readily available when seeking support.