Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Orbit Easy Dial 6-Station Indoor Sprinkler Controller (Model 57596). Designed for user-friendly setup and customizable watering schedules, this controller offers features such as rain delay, water budgeting, and dual watering programs to meet your specific irrigation needs. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Setup and Installation
Mounting the Controller
Select an indoor location near a standard electrical outlet and away from direct sunlight or extreme temperatures. Use appropriate screws to mount the controller securely to a wall. Ensure the mounting surface is stable.
Image: Orbit Easy Dial 6-Station Sprinkler Controller mounted on an indoor wall, demonstrating typical installation placement.
Wiring the Valves
Connect the common wire from your sprinkler valves to the terminal labeled "COM" on the controller. Then, connect each individual valve wire to its corresponding station terminal (1 through 6). For detailed wiring, refer to the diagram below.
Image: Close-up view of the wiring terminals inside the Orbit Easy Dial controller, showing connections for common and individual station wires.
Power Connection
Plug the power adapter into the controller's power input jack, then plug the adapter into a standard 120V AC electrical outlet. The display should illuminate, indicating power is supplied.
Image: A power adapter being connected to the Orbit Easy Dial sprinkler controller, illustrating the final step of electrical setup.
Operating Instructions
The Orbit Easy Dial controller features a simple rotary dial and push-button interface for programming. Rotate the dial to select the desired function, then use the +, -, and ENTER buttons to adjust settings.
Image: Front view of the Orbit Easy Dial 6-Station Sprinkler Controller, highlighting the display, control buttons, and rotary dial for programming.
Setting Date and Time
- Turn the dial to SET CLOCK.
- Use the + and - buttons to adjust the time, then press ENTER to confirm.
- Repeat for setting the date (month, day, year) by turning the dial to SET DATE.
Programming Watering Schedules (Programs A and B)
The controller supports two independent programs (A and B) for flexible scheduling.
- Turn the dial to START TIME. Use +/- to set the desired start time for Program A. Press ENTER. You can set up to 4 start times per program.
- Turn the dial to RUN TIME. Select each station (1-6) using the +/- buttons and set the watering duration for each. Press ENTER after each station.
- Turn the dial to HOW OFTEN. Select the watering frequency (e.g., specific days of the week, odd/even days, or interval). Press ENTER to confirm.
- To program Program B, press the PROGRAM A-B button to switch to Program B, then repeat steps 1-3.
- Once programming is complete, turn the dial to AUTO for automatic operation.
Manual Watering
To manually water a station or all stations:
- Turn the dial to AUTO.
- Press the MANUAL button. The display will show "ALL STATIONS". Press ENTER to water all stations, or use +/- to select a specific station.
- Use +/- to set the manual run time, then press ENTER to start watering.
- To stop manual watering, press CLEAR.
Rain Delay Function
The rain delay feature allows you to pause your watering schedule for a set period (24, 48, or 72 hours) without losing your programmed settings.
- Turn the dial to AUTO.
- Press the RAIN DELAY button.
- Use the +/- buttons to select the desired delay duration.
- The display will show the remaining delay time. Watering will resume automatically after the delay period.
- To cancel rain delay, press the RAIN DELAY button again until the delay is cleared.
Water Budgeting
Water budgeting allows you to adjust watering durations for all stations in a program by a percentage, useful for seasonal adjustments.
- Turn the dial to BUDGET.
- Use the +/- buttons to adjust the percentage (e.g., 50% for half the programmed time, 120% for 20% more).
- Press ENTER to confirm.
- Return the dial to AUTO for the changes to take effect.
Maintenance
- Cleaning: Wipe the controller with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Power Supply: Ensure the power adapter is securely connected and not damaged.
- Winterization: In regions with freezing temperatures, disconnect the controller from power and remove it from the wall. Store it indoors in a dry, temperature-controlled environment to prevent damage from freezing water in the lines or internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller display is blank. | No power, power adapter faulty. | Check power outlet, ensure adapter is fully plugged in. Test outlet with another device. |
| Stations not watering. | Rain delay active, wiring issue, valve malfunction. | Check if rain delay is active and cancel if necessary. Verify all wiring connections are secure. Inspect valves for damage. |
| Watering at incorrect times. | Incorrect program settings, incorrect current time. | Review and adjust start times, run times, and watering frequency in the programming section. Verify current date and time are set correctly. |
| Only some stations watering. | Wiring issue for specific stations, faulty valve. | Check wiring for the non-watering stations. Test individual valves manually if possible. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 57596 |
| Number of Stations | 6 |
| Installation Type | Indoor |
| Power Source | 120V AC (with included adapter) |
| Material | Plastic |
| Color | Green |
| Product Dimensions | 2.12"D x 6.88"W x 4.38"H |
| Item Weight | 1.3 Pounds |
| Number of Settings | 24 (referring to programming flexibility) |
| UPC | 046878575967 |
| First Available Date | October 21, 2016 |
Warranty and Support
Orbit products are known for their reliability and quality. For specific warranty information, technical support, or to explore other Orbit products, please visit the official Orbit website or contact their customer service. You can also find more information at the Orbit Store on Amazon.
Important Notes
- This controller is designed for indoor use only.
- Do not expose the controller to water or extreme weather conditions.
- Always disconnect power before performing any wiring or maintenance.
