Monoprice Essential Tilt TV Wall Mount Bracket User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Monoprice Essential Tilt TV Wall Mount Bracket. This EZ Series Slim Tilt Wall Mount is designed for displays measuring up to 70 inches and weighing up to 77 lbs. It features a simple tilting mechanism to reduce glare and has undergone extensive safety testing, certified by Underwriters Laboratories (UL), ensuring safe and reliable performance.

Please read this manual thoroughly before beginning installation and retain it for future reference.

2. Safety Information

WARNING: Improper installation or use of this product can result in serious injury or damage. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified professional installer.

• Weight Capacity: Do not exceed the maximum weight capacity of 77 lbs (35 kg).
• TV Size: Designed for 37" to 70" displays. Ensure your TV's VESA pattern and weight are within the mount's specifications.
• VESA Compatibility: This mount supports VESA patterns from 200x200 to 600x400 mm. Verify your TV's VESA pattern before installation.
• Wall Type: This mount is designed for installation on solid concrete, brick, or wood stud walls. Do not install on drywall alone.
• Tools: Ensure you have all necessary tools and safety equipment before starting.
• UL Certified: This product is UL certified, indicating it meets rigorous safety standards.

3. Package Contents

Please verify that all components are present and undamaged before installation. If any parts are missing or damaged, contact Monoprice customer service.

• Wall Plate Assembly
• TV Mounting Brackets (2)
• Mounting Hardware Kit (various screws, washers, anchors)
• Carpenter's Level
• HDMI Cable

Figure 3.1: Included Mounting Hardware

4. Setup and Installation

Follow these steps carefully for a secure installation.

4.1 Pre-Installation Checks

1. Verify your TV's weight and VESA mounting pattern (horizontal x vertical distance between mounting holes in mm). Ensure they are within the mount's specifications (up to 77 lbs, VESA 200x200 to 600x400).
2. Determine the desired mounting height for your TV.
3. Locate wall studs if mounting to wood, or ensure the concrete/brick wall is suitable for drilling.

4.2 Attaching Wall Plate to Wall

1. Hold the wall plate against the wall at the desired height and use the included carpenter's level to ensure it is perfectly horizontal.
2. Mark the drilling locations through the holes on the wall plate.
3. Drill pilot holes at the marked locations. Use appropriate drill bit size for your wall type and chosen anchors/lag bolts.
4. Secure the wall plate to the wall using the provided lag bolts and washers. Ensure it is firmly attached.

Figure 4.1: Wall Plate and TV Brackets

4.3 Attaching TV Brackets to TV

1. Carefully place your TV face down on a soft, clean surface to prevent screen damage.
2. Align the two vertical TV mounting brackets with the VESA mounting holes on the back of your TV. Ensure the hooks on the brackets are facing downwards.
3. Select the appropriate screws and washers from the mounting hardware kit that fit your TV's VESA holes.
4. Securely fasten the brackets to the TV. Do not overtighten.

Figure 4.2: Angled View of Mount

4.4 Mounting TV to Wall Plate

1. With assistance, carefully lift the TV with the attached brackets.
2. Hook the top of the TV mounting brackets onto the top rail of the wall plate.
3. Gently lower the TV until the brackets fully engage with the wall plate. Ensure the TV is centered and level.
4. Locate the security screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.

5. Operating Instructions

5.1 Adjusting Tilt Angle

This mount allows for a tilt range of +0 to -8 degrees to optimize your viewing experience and reduce glare.

1. To adjust the tilt, gently push or pull the bottom of the TV to achieve the desired angle.
2. The friction-based tilting mechanism will hold the TV in place once the desired angle is set.

Figure 5.1: Tilt Mechanism

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents.
• Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure.
• Damage: If any part of the mount appears damaged, discontinue use and contact Monoprice customer service.

7. Troubleshooting

• TV Not Level: Use the included carpenter's level during wall plate installation to ensure it is perfectly horizontal. Minor adjustments can sometimes be made by slightly loosening and re-tightening the TV brackets.
• Difficulty Tilting: Ensure no cables are obstructing the tilting mechanism. The tilt is friction-based and should move smoothly.
• Mount Feels Loose: Immediately remove the TV from the mount. Re-check all wall plate and TV bracket connections. Ensure proper anchors/screws were used for your wall type and that they are fully tightened. If issues persist, consult a professional.

8. Specifications

9. Warranty and Support

Specific warranty details for this product are not available in the provided information. For warranty claims, technical support, or replacement parts, please visit the official Monoprice website or contact their customer service directly.

Monoprice, Inc.
Website: www.monoprice.com