Lovato Electric TMM1 Multifunction Time Relay User Manual

Introduction

The Lovato Electric TMM1 is a versatile multifunction time relay designed for modular-slot switchboards. It offers a wide range of selectable time settings and operates across multiple voltages, making it suitable for various industrial and scientific applications.

Key features include:

• Multi-function time relay capabilities.
• Multi-scale time ranges from 0.1 seconds to 100 days.
• Multi-voltage operation: 12-240V AC/DC.
• Single relay output.
• LED indication for operational status.
• Designed for mounting on a 35mm DIN rail with screw terminals.

1. Setup and Installation

1.1 Safety Precautions

Always ensure power is disconnected before installation or maintenance. Installation should be performed by qualified personnel in accordance with local electrical codes and regulations. This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).

1.2 Mounting

The TMM1 time relay is designed for mounting on a standard 35mm DIN rail. Ensure the rail is securely fastened within the modular-slot switchboard.

1.3 Wiring

Connect the power supply and load to the screw terminals as per the wiring diagram provided on the device or in the detailed product documentation. The device supports multi-voltage input from 12V to 240V AC/DC.

Figure 1: Front view of the Lovato Electric TMM1 Multifunction Time Relay, showing the control knobs for time and function selection, and LED indicators. The screw terminals are visible at the top and bottom for electrical connections.

2. Operating Instructions

2.1 Function Selection

The TMM1 features multiple operating functions, selectable via the 'Functions' rotary knob on the front panel. Refer to the markings on the device for specific function modes (e.g., ON-delay, OFF-delay, Flasher, etc.).

2.2 Time Range and Setting

The 'Time' rotary knob allows selection of the desired time range (e.g., 0.1s-1s, 1s-10s, 10s-100s, 1m-10m, 1h-10h, 1d-10d, 10d-100d). Once the range is selected, use the fine-tuning knob to set the precise time value within that range.

2.3 LED Indicators

• Power LED: Indicates that the device is powered on.
• Output Status LED: Indicates the state of the relay output (e.g., ON when the relay is energized).

3. Maintenance

The Lovato Electric TMM1 is designed for long-term, reliable operation with minimal maintenance. Periodically inspect the screw terminals to ensure connections remain tight and free from corrosion. Keep the device clean and free from dust and debris. Do not use abrasive cleaners or solvents.

No user-serviceable parts are inside. Refer all servicing to qualified service personnel.

4. Troubleshooting

5. Specifications

• Model: TMM1
• Type: Multifunction Time Relay
• Input Voltage: 12-240V AC/DC
• Time Ranges: 0.1 seconds to 100 days (selectable)
• Output: 1 Relay Output
• Mounting: 35mm DIN Rail
• Terminals: Screw Terminals
• Package Dimensions: 4.65 x 2.83 x 1.06 inches
• Weight: Approximately 0.01 ounces
• Manufacturer: Lovato Electric
• First Available Date: November 2, 2016

6. Warranty and Support

6.1 Warranty Information

For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Lovato Electric directly. Warranty coverage typically applies to manufacturing defects under normal operating conditions.

6.2 Technical Support

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Lovato Electric customer support or your authorized distributor. Have your product model number (TMM1) and purchase details ready when contacting support.

Note: Always refer to the official Lovato Electric website or product documentation for the most up-to-date information and support contacts.