Introduction
This manual provides essential instructions for the safe and effective use of your Presto Magnetic Heat Control, Model 0692001. This heat control is specifically designed for use with Presto Kitchen Kettle multi-cooker steamer deep fryer models 0600010 and 0600611. Please read all instructions carefully before operation to ensure proper function and safety.
Important Safeguards
WARNING: To reduce the risk of personal injury or property damage, basic safety precautions should always be followed.
- Electrical Safety: This heat control operates at 12.5 Amps, 1500 Watts, and 120 Volts AC only. Ensure your power outlet matches these specifications.
- Magnetic Power Cord: This heat control must only be used with the magnetic power cord Model 0692505. Do not attempt to use any other power cord.
- DO NOT IMMERSE IN LIQUID: The heat control unit is an electrical component and must never be immersed in water or any other liquid. Immersion can cause electric shock or damage to the unit.
- Proper Placement: Always place the deep fryer on a stable, heat-resistant surface away from edges to prevent tipping.
- Supervision: Close supervision is necessary when any appliance is used by or near children.
- Unplug When Not in Use: Always unplug the heat control from the wall outlet and detach it from the appliance when not in use and before cleaning.
Image: Back view of the Presto Magnetic Heat Control 0692001. Visible markings include "Model# 0692001", "PRESTO®", "12.5 AMPS", "1500 WATTS", "120 VOLTS AC ONLY", and a prominent "CAUTION DO NOT IMMERSE IN LIQUID" warning. This image highlights critical safety and specification details.
Setup
- Prepare Appliance: Ensure your Presto Kitchen Kettle deep fryer (models 0600010 or 0600611) is clean and ready for use.
- Attach Heat Control: Align the magnetic heat control unit with the electrical pins on the deep fryer. The magnetic connection will securely attach the control to the appliance. Ensure a firm and complete connection.
- Connect Power Cord: Attach the magnetic power cord (Model 0692505) to the heat control unit. The magnetic end of the cord will snap into place.
- Plug into Outlet: Once the heat control is securely attached to the appliance and the power cord is connected to the heat control, plug the power cord into a standard 120V AC electrical outlet.
Image: Side view of the Presto Magnetic Heat Control 0692001, illustrating the two electrical pins designed to connect to the deep fryer. This view is crucial for understanding the attachment mechanism.
Operating Instructions
The Presto Magnetic Heat Control allows you to precisely manage the temperature of your deep fryer for various cooking needs.
- Power On: After setup, ensure the heat control knob is in the "OFF" position before plugging into the wall outlet.
- Select Temperature: Rotate the control knob to your desired temperature setting. The available settings range from 200°F to 400°F. There is also a "WARM" setting for keeping food at a serving temperature.
- Preheating: Allow the appliance to preheat to the selected temperature. A pilot light (if present on your deep fryer model) may indicate when the desired temperature is reached.
- Cooking: Once the desired temperature is reached, proceed with your cooking tasks according to your recipe.
- Power Off: When cooking is complete, turn the control knob to the "OFF" position. Unplug the power cord from the wall outlet, then detach the magnetic power cord from the heat control, and finally, detach the heat control from the appliance.
Image: Top view of the Presto Magnetic Heat Control 0692001, featuring the temperature dial. The dial includes settings for "OFF", "WARM", and numerical temperatures from 200°F to 400°F, indicating precise control over heating.
Maintenance and Cleaning
Proper maintenance ensures the longevity and safe operation of your heat control.
- Always Unplug: Before cleaning, ensure the heat control is unplugged from the wall outlet and detached from the deep fryer. Allow it to cool completely.
- DO NOT IMMERSE: As stated in the safeguards, never immerse the heat control in water or any other liquid.
- Wipe Clean: To clean the exterior of the heat control, wipe it with a damp cloth. For stubborn stains, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Dry thoroughly.
- Storage: Store the heat control in a dry place when not in use.
Troubleshooting
If you encounter issues with your Presto Magnetic Heat Control, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not heat up. | Heat control not properly connected to appliance. | Ensure the heat control is firmly and completely attached to the deep fryer's electrical pins. The magnetic connection should be secure. |
| Appliance does not heat up. | Magnetic power cord not properly connected. | Verify the magnetic power cord (Model 0692505) is securely attached to the heat control unit. |
| Appliance does not heat up. | Power cord not plugged into outlet or outlet is not functioning. | Plug the power cord firmly into a working 120V AC outlet. Test the outlet with another appliance if necessary. |
| Inconsistent heating. | Loose connection between heat control and appliance. | Re-seat the heat control firmly onto the deep fryer. |
Specifications
- Model Name: 0692001
- Brand: Presto
- Material: Heat Resistant Plastic
- Color: Black
- Item Weight: 3.9 Ounces (approximately 110 grams)
- Manufacturer: Presto
- UPC: 669900234436
- Product Dimensions: 5.5 x 2.13 x 1.63 inches (L x W x H)
- Electrical Rating: 12.5 Amps, 1500 Watts, 120 Volts AC
- Temperature Settings: OFF, WARM, 200°F to 400°F
- Compatible Appliances: Presto Kitchen Kettle Multi-Cooker Steamer Deep Fryer Models 0600010 and 0600611
Warranty and Support
For warranty information or technical support regarding your Presto Magnetic Heat Control Model 0692001, please contact Presto Customer Service directly. Refer to the contact information provided with your original appliance documentation or visit the official Presto website.
Note: This heat control is designed as a replacement part for specific Presto deep fryer models. Ensure compatibility before purchase.
