1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.
2. Product Overview
The IGSW-24040T is an IP30-rated industrial managed Ethernet switch designed for robust network environments. It features 24 10/100/1000Base-T ports and 4 shared 1000Base-S/LX SFP slots, offering high port density and Gigabit fiber link capabilities. This switch supports advanced Layer 2 to Layer 4 data switching, redundancy protocols like ERPS Ring, IEEE 1588v2 Transparency, and Modbus TCP. It is engineered for stable operation in wide temperature ranges (-40 to 75°C) and includes redundant AC and DC power supply options for enhanced reliability.
3. Package Contents
Please verify the contents of your IGSW-24040T package. If any items are missing or damaged, contact your vendor immediately.
- PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch
- Power Cord (AC)
- Terminal Block Connector (for DC power)
- Rack-mounting Kit
- Quick Installation Guide
- Resource CD or Link to Online Documentation
4. Physical Description
4.1 Front Panel
The front panel of the IGSW-24040T switch provides all network connectivity ports and status indicators.
An image showing the front panel of the PLANET TECHNOLOGY IGSW-24040T Industrial Managed Switch, featuring 24 Ethernet ports, 4 SFP/TP combo ports, and power input connectors.
- Ethernet Ports (1-24): 24 10/100/1000Base-T RJ45 ports for connecting network devices.
- Combo Ports (25-28): 4 shared 100/1000Base-X SFP slots or 10/100/1000Base-T RJ45 ports. These ports can operate as either SFP fiber ports or copper Ethernet ports, but not simultaneously.
- LED Indicators: Provide status information for power, system, and port activity.
4.2 Rear Panel
The rear panel houses the power input connectors and grounding screw.
- AC Power Input: Connector for the 100~240V AC power supply.
- DC Power Input: Terminal block connector for the 36~72V DC power supply, supporting redundant power.
- Grounding Screw: For connecting the chassis to earth ground.
5. Setup
5.1 Installation
The IGSW-24040T is designed for rack-mounting in a standard 19-inch equipment rack. Ensure adequate ventilation around the unit to prevent overheating.
- Attach the provided rack-mounting brackets to the sides of the switch using the included screws.
- Secure the switch into the 19-inch rack using appropriate rack screws.
- Connect the grounding screw on the rear panel to a reliable earth ground using a grounding wire.
5.2 Power Connection
The IGSW-24040T supports redundant power inputs (AC and DC) for enhanced reliability.
- AC Power: Connect the AC power cord to the AC power input on the rear panel and then to a standard AC power outlet (100~240V AC).
- DC Power: Connect the DC power source (36~72V DC) to the terminal block connector on the rear panel, ensuring correct polarity. Secure the wires firmly.
- For redundant operation, connect both AC and DC power sources. The switch will automatically switch to the available power source if one fails.
5.3 Network Connection
Connect your network devices to the switch ports.
- Ethernet Devices: Use standard RJ45 Ethernet cables to connect computers, servers, or other network devices to the 10/100/1000Base-T ports (1-24).
- Fiber Optic Devices: Insert compatible SFP modules into the SFP slots of the combo ports (25-28). Connect fiber optic cables from your fiber network devices to the SFP modules. Ensure that if an SFP module is used in a combo port, the corresponding RJ45 port is not used.
6. Operating the Switch
6.1 Basic Configuration
The IGSW-24040T is a managed switch, offering various configuration options via a web-based interface, console port, or SNMP.
- Initial Access: Refer to the Quick Installation Guide for the default IP address and login credentials to access the web management interface.
- IP Address Configuration: Configure the switch's IP address to match your network subnet.
- Password Change: For security, change the default administrator password immediately after initial login.
6.2 Advanced Features
The IGSW-24040T supports a range of advanced features for industrial network optimization and control.
- Layer 2/4 Management: Utilize VLANs, Link Aggregation, Spanning Tree Protocol (STP), and other Layer 2 features for network segmentation and redundancy.
- Modbus TCP: Integrate the switch into industrial control systems using Modbus TCP for monitoring and management.
- ERPS Ring: Implement Ethernet Ring Protection Switching for rapid network recovery in ring topologies.
- IEEE 1588v2 Transparency: Support for precise time synchronization in industrial automation applications.
- Quality of Service (QoS): Prioritize critical network traffic to ensure consistent performance for sensitive applications.
- Network Access Control: Implement security policies to control access to the network.
- DIDO (Digital Input/Digital Output): Utilize DIDO functions for external event triggering and alarm notifications.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your IGSW-24040T switch.
- Environmental Control: Ensure the operating environment remains within the specified temperature and humidity ranges.
- Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions.
- Firmware Updates: Check the PLANET TECHNOLOGY website for the latest firmware updates. Applying updates can improve performance, add features, and address security vulnerabilities.
- Configuration Backup: Regularly back up the switch's configuration settings to an external device.
8. Troubleshooting
This section provides solutions to common issues you might encounter with the IGSW-24040T switch.
- No Power:
- Verify that the power cord(s) are securely connected to the switch and the power source.
- Check the power outlet or DC power supply for functionality.
- Ensure the power LED on the front panel is illuminated.
- No Link on Port:
- Check the Ethernet cable connection between the switch and the connected device.
- Ensure the connected device is powered on and functioning correctly.
- For SFP ports, verify the SFP module is correctly inserted and compatible, and the fiber cable is intact.
- Check the link/activity LED for the specific port.
- Cannot Access Web Interface:
- Ensure your computer's IP address is in the same subnet as the switch's IP address.
- Verify physical network connectivity to the switch.
- Try pinging the switch's IP address.
- If the IP address is unknown or forgotten, you may need to reset the switch to factory defaults (refer to the full user manual for this procedure).
9. Specifications
| Feature | Description |
|---|---|
| Model Number | IGSW-24040T |
| Ports | 24 x 10/100/1000Base-T RJ45, 4 x 100/1000Base-X SFP (shared) |
| Switch Fabric | 48Gbps / non-blocking |
| Throughput | Up to 48Gbps wire-speed |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Power Consumption | Max. 30 watts / 102 BTU (AC) |
| Power Input | 100~240V AC, 36~72V DC (Redundant) |
| Dimensions (L x W x H) | 17.32 x 7.87 x 1.75 inches (440 x 200 x 44.5 mm) |
| Item Weight | 6134 pounds (2788 Kilograms) |
| Enclosure | IP30-rated metal case |
| Supported Protocols | IEEE 1588v2 Transparency, ERPS Ring, DIDO, Modbus TCP |
| Management | L2/L4 Managed |
10. Warranty and Support
For warranty information, technical support, and service inquiries, please refer to the documentation included with your product or visit the official PLANET TECHNOLOGY website. Keep your purchase receipt for warranty validation.
