Introduction
Thank you for choosing the AWEI A885BL Bluetooth Headphones. This manual provides detailed instructions on how to set up, operate, and maintain your headphones to ensure optimal performance and longevity. The A885BL is a sport-oriented wireless earphone featuring IPX4 waterproofing and NFC connectivity, designed for active lifestyles.
Figure 1: AWEI A885BL Bluetooth Headphones
Setup
Charging the Headphones
Before first use, fully charge the AWEI A885BL headphones.
- Locate the Micro USB charging port on the headphone unit. Refer to Figure 2 for port location.
- Connect the provided USB charging cable to the headphone's Micro USB port and the other end to a USB power source (e.g., computer USB port, wall adapter).
- The indicator light will show the charging status. Once fully charged, the light will change or turn off, depending on the model's specific indicator.
Figure 2: Headphone Components and Micro USB Charging Port
Bluetooth Pairing
To connect your headphones to a device via Bluetooth:
- Ensure the headphones are charged and turned off.
- Press and hold the Multi-Function Button (MFB) until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "AWEI A885BL" from the list of found devices.
- Once paired, the indicator light on the headphones will typically flash blue slowly or turn off.
NFC Connection (If Supported by Your Device)
For devices with NFC (Near Field Communication) capability, you can pair the headphones quickly:
- Ensure NFC is enabled on your device and the headphones are in pairing mode or turned on.
- Tap your NFC-enabled device against the NFC area on the AWEI A885BL headphones (refer to product diagram for NFC location).
- Your device will prompt you to confirm the connection. Accept to complete pairing.
Figure 3: NFC Connection Process
Operating Instructions
Basic Controls
The AWEI A885BL headphones feature intuitive controls for media playback and call management. Refer to Figure 2 for button locations.
- Power On/Off: Press and hold the Multi-Function Button (MFB) for approximately 3 seconds.
- Play/Pause: Short press the MFB.
- Volume Up: Short press the "VOL(+)/NEXT TRACK" button.
- Volume Down: Short press the "VOL(-)/PREVIOUS TRACK" button.
- Next Track: Long press the "VOL(+)/NEXT TRACK" button.
- Previous Track: Long press the "VOL(-)/PREVIOUS TRACK" button.
- Answer/End Call: Short press the MFB during an incoming call.
- Reject Call: Long press the MFB during an incoming call.
- Redial Last Number: Double-press the MFB.
IPX4 Waterproof Feature
The AWEI A885BL headphones are designed with an IPX4 waterproof rating, making them resistant to splashing water from any direction. This makes them suitable for sports and outdoor activities where light rain or sweat may be encountered.
- Note: IPX4 rating means resistance to splashes, not submersion. Do not immerse the headphones in water.
- After exposure to sweat or light rain, wipe the headphones dry with a soft cloth before charging or storing.
Figure 4: IPX4 Waterproofing
Maintenance
Proper maintenance ensures the longevity and performance of your AWEI A885BL headphones.
- Cleaning: Use a soft, dry, lint-free cloth to clean the headphones. Do not use abrasive cleaners, solvents, or aerosol sprays.
- Ear Tips: Regularly remove and clean the ear tips with a damp cloth and mild soap if necessary. Ensure they are completely dry before reattaching.
- Storage: When not in use, store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To preserve battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not in use for extended periods.
Troubleshooting
If you encounter issues with your AWEI A885BL headphones, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with device. | Headphones not in pairing mode; Bluetooth off on device; device too far. | Ensure headphones are in pairing mode (flashing red/blue). Turn on Bluetooth on your device. Move device closer to headphones (within 10 meters). |
| No sound or distorted sound. | Volume too low; device not connected; audio source issue. | Increase volume on both headphones and device. Re-pair the headphones. Check audio source on your device. |
| Charging issue. | Faulty cable or power source; dirty charging port. | Try a different USB cable and power source. Clean the charging port gently. |
Specifications
| Feature | Detail |
|---|---|
| Model | A885BL |
| Brand | Awei |
| Connectivity Technology | Wireless (Bluetooth) |
| Wireless Communication Technology | Bluetooth |
| Water Resistance Level | IPX4 Waterproof |
| Control Method | Touch (referring to button presses) |
| Item Weight | 200 Milligrams |
| Product Dimensions | 142 x 61 x 178.5 cm |
| Batteries | 1 Lithium Ion battery required (included) |
| Recommended Uses | Cycling, Running, Exercising |
| Included Components | Ear Cushions |
| Material | Plastic |
| Form Factor | In ear, On Ear |
Warranty and Support
The AWEI A885BL Bluetooth Headphones typically come with a manufacturer's warranty.
- Warranty Period: A 6-month warranty is generally provided for this product. Please refer to your purchase documentation for specific warranty terms and conditions.
- Customer Support: For technical assistance, warranty claims, or further inquiries, please contact Awei customer support through their official website or the retailer from whom you purchased the product.
- Model Information: When contacting support, please provide your product model number (A885BL) and purchase details.
