Angelcare Baby Bath Support (Grey) Instruction Manual

Introduction

Thank you for choosing the Angelcare Baby Bath Support. This product is designed to provide a comfortable and secure bathing experience for your newborn up to 6 months of age or 20 lbs (9 kg). Please read this manual carefully before use to ensure proper setup, operation, and maintenance.

Important Safety Information

• WARNING: Drowning hazard. Babies can drown in as little as 1 inch (2.5 cm) of water. Always keep your baby within arm's reach. Never leave your baby unattended in the bath, even for a moment.
• This product is intended for use with infants from birth up to 6 months of age, or a maximum weight of 20 lbs (9 kg). Discontinue use when the child can sit up unaided.
• Always check the water temperature before placing your baby in the bath support.
• Ensure the bath support is placed securely in the bathtub or large sink before placing your baby in it.
• Inspect the product for any damage or wear before each use. Discontinue use if any part is damaged.

Product Overview

The Angelcare Baby Bath Support features an ergonomic design with a soft-touch mesh material that quickly warms to the water's temperature, ensuring comfort for your baby. It is lightweight, durable, and designed for easy cleaning and storage.

Setup and Placement

1. Unpacking: Remove the Angelcare Baby Bath Support from its packaging. No assembly is required.
2. Placement in Bathtub: Place the bath support directly into your standard adult bathtub. Ensure it is stable and does not rock. The non-slip base helps keep it in place.
3. Placement in Large Sink: For smaller infants, the bath support can be used in a large, single-basin kitchen sink (larger than 23x14 inches). Ensure the sink is clean and the support is stable.
4. Water Level: Fill the tub or sink with a shallow amount of water, ensuring the water level is appropriate for your baby's size and never exceeds your baby's waist when seated in the support.

Operating Instructions

1. Prepare the Bath: Fill the bathtub or sink with warm water. Always test the water temperature with your elbow or a bath thermometer to ensure it is safe (around 98-100°F or 37-38°C).
2. Place Baby: Gently place your baby into the bath support. The ergonomic shape will cradle your baby, providing support and allowing your hands to be free for washing.
3. Bathing: Use a soft washcloth and baby-safe soap to gently wash your baby. The perforated soft-touch material allows water to flow through, keeping your baby warm and making rinsing easy.
4. Removal: Once bathing is complete, carefully lift your baby out of the bath support. Wrap your baby in a towel immediately to keep them warm.

Cleaning and Maintenance

• After each use, rinse the bath support thoroughly with clean water.
• The hygienic mesh material allows water to drain easily and air dry quickly, preventing mold and mildew buildup.
• For deeper cleaning, use mild soap and water. Avoid abrasive cleaners or harsh chemicals.
• Ensure the bath support is completely dry before storing.

Storage

The Angelcare Baby Bath Support is designed for convenient storage. It features a handy loop at the top, allowing it to be hung on a hook in your bathroom for quick drying and space-saving storage.

Specifications

Warranty and Support

For warranty information, product registration, or customer support, please visit the official Angelcare website or contact their customer service department. Keep your purchase receipt for proof of purchase.